1 / 1
Minimal Stand's Divider [Add-On] - Tablet, Laptop, Books and Anything In-between.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add more slots to your Minimal Stand with this divider.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 137
- Makes
- 1
- Views
- 537
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Standard Digital File License
Add more slots to your Minimal Stand with this divider.
The Divider is 5mm thick, please adjust the peg's length accordingly.
Prints Settings:
Supports: Tested with no support.
Layer height: Tested with 0.2mm.
Infill Pattern: 3D Honeycomb.
Infill Percentage: ≥5%
Assembly:
Sandwich it between two bases and drive the peg through like normal before placing the wall on both ends.
Consider Supporting!! Your support will allow me to continue sharing my design.
buymeacoffee.com/supanut.tho
