Counting matching models…
Fully parametric folding laptop stand designed from scratch in Shapr3D. Set your display size and the model updates automatically; a thickness variable lets you tune looks and material use. Adjustable height via angled notches with a…
See https://www.printables.com/model/378521-laptop-stand/files for details. Use this model for the sides if you have a thicker laptop.
No need for supports. Prints fine with PLA. Designed to fit around stands like this: These stands are made for at most 15.6inch. This extension allows for deeper laptops to be supported without them leaning back. The laptop shown in the…
Vertical notebook/laptop stand originally designed for a notebook with a keyboard thickness of approx. 1.3 cm. The laptop shown in the picture is a Lenovo (original design was based on an Asus VivoBook 14 Flip, 14"). The model can be…
Holds a MacBook Pro 2021 14" on the leg of a Flamaker Electric Standing Desk. Model is designed to take 4 M6x20mm Bolts, with spring washers. I used Diall branded ones from B&Q. In order to make sure that the leg was gripped tightly, I…
brings the Dell E74XX up to monitor height. I'm sure it would work for others as well. I used 3/8" wood dowels to complete this nifty laptop riser. (cut to roughly 9 ¾" - so that the back lands between all the plug ports -see photo)…
Stand is made from more parts. Use “AsemblyScheme.pdf” (and instant glue). You will nedd more parts : Screws : M3x12; M8x16; M4x10 Pads : Felt pads 38mm, Silicone pads 10mm see the “AsemblyScheme.pdf” Good Luck … :)
Ofcourse you can ommit printing skulls ;) And enjoy the stand without it. Its robust, works well with 14' or 15' laptop.
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful. My kids need space on their desks and a cool idea was to store their laptops under the table plate. I have found several models on…
loved this laptop model by mothdotmonster, just wanted to have a deboss to the screen and touchpad, coloured up in three colours, added a white screen so i could use a waterslide decal as if laptop were powered on, awesome! thank you!
This is a remix of the "The Laptop Saver - A sub-desk level drink holder" model clamp and a convenient headphone holder
This simple and practical stand raises your laptop and creates extra storage space underneath, perfect for keeping notebooks, pens, or other essentials close at hand. Its sleek, modern design fits seamlessly into any workspace and works…
I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.
This is a laptop cooler stand that you can parametrize to your needs. The design was inspired by Carlo Franciscone's laptop cooler stand on Thingiverse. Since we wanted a larger and inclined version we took some time after work to create…
Vertical arc laptop stand with four thickness options (for now!). The stand is built to hold the above models is stable on the table top while having a close fit to the laptop where it doesn't wobble but isn't snug enough to pick up the…
A laptop stand that works for 17" and smaller laptops and has good airflow and stability. Allows USB C passthrough. In the pictures I used felt on the surface the laptop is on but this isn't required. Should print fairly easily without…
A quick and adjustable laptop holder screwed to side of my desk for my MacBook 13". Printed in 3D FILLIES PETG on my K1C. Allows access to the USB - C connectors on the laptop (as long as you're OK with the apple being upside down ;))…
Fully 3D Printed Laptop Table Hanger. Yes, you can buy something like this, but now you can also print it. Was designed to sustain ~20 kg clamping force and at least 5 kg of payload PER HOOK with a minimal deformation. As much as the form…
Printed on .2 layers; 3 perimeters; no top/bottom layers in PLA and also works on PETG. Print with out top and bottom layers and a cool inflill to save filament and make it cooler. I add silicone circles to make it non-slip. (Cut little…
An air-inlet spacer for the Framework Laptop 13 (AMD Ryzen 7040) which fits on Prusa i3 mk3 print-beds. Based on Choumarin's bottom spacer for framework laptops . For a quick summary, see Differences of the remix compared to the original…
4-slot laptop stand/holder L X W X H: 170 X 170 X 60 (mm) Slot width: 21 mm Note: I forgot the thickness of the rubber feet strip of my xps15, so it can only fit from one side.
Vesa bracket for laptop, there are three sizes, 250mm, 275mm and 300mm. i design this for larger printer, if your printer is not that big, remix it yourself. Step files available.
This mount is sizedto hold the Caldigit TS3 laptop dock and has a crossbar and a slight lip to ensure that your laptop dock fits snugly in place for connecting/disconnecting cables. It leaves the front and back of the dock exposed and…
I printed out the Rift laptop stand and liked it but wished it was heavier. So I modeled up an adjustable laptop stand that can be filled with whatever you want, I chose lead shot because it was much heavier than sand or concrete and…
Minimalistic folding feet for laptop rear side elevation and better air flow - heavy duty version. It's easy to print and assemble. This version is focused around Cat Paw styling (PUNI) with features: let you laptop spread its paws with…
I developed this compact laptop stand, fast print in place. Space-saving system ideal for travelling, max thickness of 6.5 mm, with a length and width of 50 mm
This is a simple leg for HATRON HCP130 laptop cooling pad. i think you can use this for other brands that exactly are same with HCP130 the difference is just brand names.
I made these brackets for mounting a laptop to the side of a desk because I couldn’t find any designs I like that didn’t involve drilling into the desk. Print 2 of everything and then screw the screw into the clamp before attaching the…
A compact and sturdy stand designed to hold tablets or laptops at a comfortable viewing angle. Built for stability and portability, it features a clean, minimalist design and supports multiple device sizes. Ideal for workstations, study…
This is a laptop stand that has pins that can adjust to any size needed using the bar extension to add 2 bars together if required strong enough to hold any laptop you may need can be entirely printed on one 220*220 build plate. How to…
This laptop riser is only 2 cm tall. Most other stands are much higher, which can make typing and working uncomfortable. Even this minimal incline helps improve thermal performance and cooling. The riser should be compatible with most…
Little screw l=30mm/d=2mm for this project https://www.printables.com/model/71035-foldable-laptop-stand
Print Settings: Layer Height: 0. 2mm Supports: Yes Infill: 5%. Print in the given angle otherwise problems will be caused. Please leave a like and share your Feedback ;)
Lost some of my rubber feet so I decided to print new ones. Mine are in 95A TPU and are not very grippy so something softer would work best. But it's much better than missing feet.
Introduction The original battery for my Toshiba T1000SE laptop was completely dead, and the laptop doesn't work with just the charger connected. To get it to work, I had to feed approx. 7.8V (the voltage of a fullly charged 6-cell NiCd…
Standalone case and optional display stand for use with a framework 16 mainboard and display. The display stand utilizes the built-in mounting points on the display, enabling simple but sturdy mounting. The original mainboard case model…
This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a MAC M2 Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with Mac Version of WiFi Explorer Pro. Will print without supports. .2mm…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
DIY Monitor Frame – Lenovo LP173WF4(SP)(F1) This is a 3D-printable frame for a Lenovo laptop LCD panel LP173WF4(SP)(F1) . The cutout is made precisely for this exact panel model – no universal fit. The design allows mounting of the LCD…
Just print them and snap them together(remember to put the battery in first). For best performance use PETG for the lid but I'm sure PLA would work although I did not try it with PLA. Unfortunately you will have to use supports but I used…
The laptop stand lifts the device by 13 mm, improving airflow and providing a more comfortable working position. This model can be printed with PLA or PETG.
Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.
this is a desk stand for your tablets/laptops that you can use to load your devices and simultaniously hide your power bricks. ideal for tablets, laptops, bigger smartphones and convertibles. just put your power brick in the compartment…
Basic Stand for Laptop 180 x 186.5 x 15 mm with fixed width. Adjustable on 7 angles. Printed as an assembly with additional 2 sliders, print with brims is recommended to avoid blocking the joints due to warping. Don't hesitate to share…
UPD: I updated the holder a little, added a limiter to prevent accidental keyboard presses. Based on the cool work of these guys. Thank you! @Bader @pajdzik I decided to modify this model for my (msi katana 17") laptop, which is quite…
An easy to print and even more easy to assemble laptop stand. Print one left and one right piece, snap it together with three horizontal braces and you're good to go. I designed it for my 13-inch macbook, but it fits 14-inch laptops…
Now out of beta , the Universal Laptop Charger Mount is used for mounting underneath your desk using screws, and velcro straps to attach charger to mount. PRINT SETTINGS: Recommended to beef up the infill near the screw holes 15% Infill…
This is a laptop stand I designed for the HP ProBook I use at work. The stand allows the laptop to be easily 'docked' when connected to external monitors. It features a 10 mm cable cut-out 'hole' on each side of the stand, allowing cables…
This bracket will hang on your laptop screen and hold your phone so you don't have to lean over and look at it. I designed it when I was getting a lot of help from AI on my phone to learn some coding, and my neck was getting sore, so here…
Beefy laptop stand I made for my engineering laptop at work. You will need to print 4 parts total: x2 Laptop_Stand_1, x2 Laptop_Stand_2 This was designed to fit a large Dell laptop, but since the two stands/clamps are separate you can…
This is for attaching a HP 45W USB-C laptop charger to an openGrid board using multiconnect. Print one of each part, using the settings you used for the other components of your openGrid setup. This power adaptor is not very heavy. You…
Printed in a Prusa mini+ Print settings: 0.20mm QUALITY PLA filament Supports: None Infill 15% Used Filament 1.92gr print time 14 min
Printed in a Prusa mini+ Print settings: 0.20mm QUALITY PLA filament Supports: None Infill 15% Used Filament 1.92gr Printing time 14 min
My Laptop Charger's power output wire got broke from the root of the charger . So i design this to repair that and prevent that from happening again. this protect the wire from bending and also hide the repair i did for the wire.
Sick of leaning your laptop against your chair? Print a holder for you end table! Included Rhino 8 file for those whom might want to modify.
This is a dual vertical laptop stand with 18mm of laptop thickness and an Anker USB-C hub holder with room for the Anker Nano USB-C Hub (7-in-1, 4k HDMI) Model: A83D2. You can easily switch between two laptop systems with the USB-C cable…
I custom made a 3d printable laptop stand, I myself have NOT TESTED IT yet but in the future I plan to!
This is a laptop stand that doesn't take too long to print. I fusing the STL files, remember to print 2 of them.
Show off your love for Opera GX with this clean, minimalist logo sticker and matching coaster set , designed specifically for 3D printing. The sticker is ideal for laptops, PC cases, notebooks, or desks, while the coaster adds a subtle GX…
Hooks to hold a laptop/tablet on a treadmill. Guaranteed to fit a Sole F80 treadmill (as you can see in the photos), but should fit other models also. The hooks have "teeth" in the back designed to line-up and grab to the back grille for…
Uchwyt do zasilacza od laptopa firmy MSI model ADP-330CB-B. Wymiary wewnętrzne kieszeni to 102x48mm. Uchwyt montowany jest na dwie śruby meblowe o głowie walcowej M6x15 plus mufy do drewna (widoczne na zdjęciu). Do trzymania zasilacza w…
Support your creators via this link: https://www.paypal.com/ncp/payment/7XH5TK4DDEQX4
I created a couple of additions to make the stand more robust. First, I created a bar for added stability. Second, I created some hooks because I use my laptop vertically, and the piece would come loose when I closed it. These two…
This improved laptop stand design features a central shaft that securely locks the two main bodies together, preventing them from sliding apart during use. For the best experience, it is recommended to place two small anti-slip rubber…
This is the parametric laptop riser. You can change “laptop_thickness” value to clamp the laptop, and change the “bottom_diameter” for the height. Also you can change "top_diameter" value for the top cylinder as you wish. Print with PLA…
A remix of an under desk laptop storage solution. I have a 14" and 16" Macbook Pro. This allows me to store them out of the way, and easily switch between my work and personal laptops.
Get more organized with this Laptop/Tablet stand! If you are looking for a sleek , stylish and clean design that fits into every workspace, this model is for you :) I created different models for every use case. I made stands with one or…
This laptop stand is designed to improve desk ergonomics and workspace organization at the same time. By elevating the laptop, the screen is positioned closer to eye level, helping reduce neck strain during long work sessions. The open…
Double laptop stand for one laptop in use and a second mounted vertically behind. Snaps together to give a very solid stand. Print left and right parts and 3x cross pieces. I printed in PLA with standard settings and 10% infill.
My smashed and bashed laptop was missing one of its bottom feet. I removed the one that was still there, measured it and this is the end result. You can attach it with superglue or strong double-sided tape. - 0.2mm layer height - PLA,…
Flexible clip to keep laptops from sliding forward. To be used in addition to this under desk laptop holder. After printing, I used a hair dryer to heat and bend it.
(EN): Improve your typing posture and cool down your laptop. These independent 'Shark Fin' risers lift the back of your laptop to increase airflow and prevent overheating. Portable: Small enough to carry in your pocket. Grip: Features top…
We know that keeping laptops and tablets at an inclined angle improves thermal dissipation and airflow, which helps in better cooling performance. Based on this understanding, we designed an inclined support system. With this design, we…
This laptop stand looked awesome, but I needed something similar that could hold three laptops, so I recreated it to fit my needs. It now supports three laptops with 20 mm spacing between the slots and uses flexible TPU-printed inserts…
Furniture costs are rising rapidly, and affordable options often compromise on quality. MDF boards, which are commonly used as a low-cost alternative, come with multiple drawbacks such as poor strength, moisture sensitivity, and limited…
Simple notebook stand for everyday use, ligthweight and compact.
Extended Legs for Generic Laptop Height Riser This is a replacement lower leg for a generic laptop stand, designed to raise the laptop screen higher so it aligns better with an external monitor. This is a simple upgrade that can…
Want to use your phone as a webcam, and already own a Quadlock case? This part might help you. Very easy to print, I used the default printer settings, as shown in the screenshot. The support was removable almost without traces. License…
Sleek Minimalist Laptop Stand - Structural Leg Elevate your workspace with this ergonomic, high-strength laptop stand component . Designed specifically for 3D printing, this leg combines a modern aesthetic with rock-solid stability to…
When buying the table legs they only came with 2 hooks, but have 4 mounting locations, 2 on each side. hooked made in a similar look the the originals to be able to use the unused mounting positions to store other items. Designed to be…
Just wanted to gain Expierience in CAD with easy geometrys and shapes. For assambly: -3xLaptopkuehler_mount -3xLaptopkuehler_mount_unten-Körper -2xquerstrebe-Körper -2xverbinder-Körper 12x Screws n nuts Something to keep a bit Dust…
Modify in our 3D software to extend to meet the dimensions of your end table. Split in your Slicer to fit your printer. Pads printed in Flex.
Capture the spirit of the digital generation with this stylised Teen Boy with Laptop sculpture. Seated cross-legged and focused on his screen, this figure represents creativity, learning, and modern connection in a clean, contemporary…
Table to place your laptop or ipad/tablet in front of your bike. You can also put some bars and your bidon on it so you're ready for you efforts :-). I included the stl's for the table and the step file for the feet. i did this so you…
this is part of a monitor setup simply screw the mounts as far part as needed on the wall then connect your monitor
the shrinking tubes and tapes make repair messy and rise the chance of broking again. so i need this spare part and didn't find in net. I hope it could help others. first desolder the old wire 2.cut it properly 3.put it to the part two…
This is the entire hook from @qna_2716083 with new sizing.
![Portable Laptop/Keyboard Riser [Outdated - Unsupported]](https://media.printables.com/media/prints/eb072a6f-d319-441d-a9ac-d43ce8c6769c/images/10849699_c87994c6-5f2c-4213-b4c9-106bebea7d82_003d9c40-5a51-47ef-8c02-0a950e45f144/1000014011-removebg-preview.png)
![[WIP]DIY Monitor from Lenovo laptop LCD LP173WF4(SP)(F1) and similar](https://media.printables.com/media/prints/9272192f-4229-417d-b2d2-dbcbfd00428c/images/11305362_1e41f76b-e0a1-40af-966f-d6433e1f4609_541741c1-beac-42ac-9531-adc52c7cf939/pxl_20251130_120236148.jpg)
