1 / 8
Mini laptop stand/riser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini laptop stand/riser
- Rating
- 4.76 / 5
- Likes
- 194
- Downloads
- 2,001
- Makes
- 31
- Views
- 6,463
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a laptop stand/riser that's ultra portable and easy to print.
Tested on Asus G14. Should work for most laptops.
- Print time about 1:30 h (for the pair)
- I've printed mine using PLA 0.25mm, 20% infill (default Prusa slicer profile for Prusa mini+)
- They can clip onto each other so you don't lose one
- You can print it with 0.6mm nozzle with 0.4 layer and 3 perimeters and it's gonna print beautifully without any infill but they won't clip in tightly.
- You can add an rubber band so they don't slip on the table
You can check the model out on https://cults3d.com/en/users/maxx1313/creations if you wanna support me.