Precision Tweezers v2 - 3D Folding
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…
- Downloads
- 41,808
- Likes
- 12,184
- Rating
- 4.67
2,365 models
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
Features: 10 by 10 inches (scale down in slicer for smaller sizes) Flies 35 to 50 feet 20 grams of PLA One part No supports needed! Usage: Pinch behind wings Adjustable flaps for optimal preformance Bend front wing flaps down and back…
Use stock 4010 fan and bolts. Both the fan shroud and the air duct can be printed in PLA. Two versions available, with honeycomb or horizontal grill intake. Print settings: Nozzle diameter: 0.4 mm Layer height: 0.1-0.2 mm Infill density:…
Instruction Pour water into model and make bird music :) Water level should be like on a picture or a little more. If bird only whistle try tilt it forward. You have to find spot where water is bubbling by you blow. Different tone of…
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. In this version I added an internal structure to greatly improve the accuracy and I created a full set of tweezers. There are 7 models :…
Summary: The 18650 cell holder is a 3D-printable component designed for securely holding 18650 lithium-ion cells. It combines a lightweight structure with high durability, making it perfect for DIY battery packs, electronics projects, and…
Garage Set part 4 : Tweezers for 3d printers I don't have a 3D printer so if I could win a Prusa i3 MK3S at the "pratical contest" it would be fantastic. Please vote for me !!! Dje See also in pratical contest: Bathroom Set :…
This Gridfinity compatible holder has four spaces in a 1x1 holder. The front two are 8 units high and the back two are 12 units high - perfect for a few pairs of tweezers and a feeler gauge - these tools are always right beside my…
A practical probe holder designed to keep multimeter test leads firmly in place while working on electronics, microcontrollers, PCBs, and electrical circuits. It acts as an extra hand, allowing users to perform measurements more…
This part was originally on thingiverse. I will move it here as the site had problems with stability and spam. Feel free to browse the comments and makes here . This is a custom hotend duct, which uses the stock fans and improves part…
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
This is a lightweight, strong basket that prints in just over 1 hour. The design helps with catching purged material when it drops off the wrong end of the wiper.
UPDATE : A new and improved angled version is now available for download! https://www.printables.com/model/475497-angled-jst-tweezers _____________ I've been using this JST tweezers whenever I'm modding 3d printers. If you're like me, I…
I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…
Tweety, also known as Tweety Pie and Tweety Bird, is a yellow canary in the Warner Bros. Looney Tunes and Merrie Melodies series of animated cartoons. The name "Tweety" is a play on words, as it originally meant "sweetie", along with…
Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
REVISION HISTORY 2023-07-23: v1.01 released - resolved issues with overhangs in the “teeth” 2023-05-08: v1.00 released PROBLEM I found out that though my JST tweezers, being very effective for pulling out and connecting back JST…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…
It's a minimalist stand, with a customizable width. Perfect for anything. Need More Slots?: Prints this Divider separately. Have all the slots you want! Adjust The Width: You can stretch the base model in z-direction in the slicer for a…
Modern, Lightweight, and Sturdy Pull-Handle Set Introducing our versatile pull-handle set, perfect for anyone seeking a durable and stylish solution for their home, office, or project. Designed with a modern industrial look, these handles…
This two part lightweight and simple model is ideal for 22" x 28" (550x700mm) Poster Paper you can find at your local hobby store although any size will work OR standard printer paper ! Whether you are shooting 3D model pictures on your…
Tweezer Holder for the HSW Tweezer container, easy to print with 2 models to choose. Can be printed without support. Easy to Snap to your Honeycomb Storage Wall. Tweezer Dimension This holder is designed based on the regular tweezer with…
Holder for six tweezers like this: https://www.aliexpress.com/item/1005002899777953.html?spm=a2g0o.productlist.0.0.e8d24
Pointy boi storage for the Gridfinity modular workshop storage system - saves space and delicate fingies! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…
Introducing a set of six intricate (ornate), flat Christmas ornaments, perfect for quickly and beautifully decorating your Christmas tree! These lightweight, delicate decorations are designed for maximum 3D printing efficiency.
Other polymaker cardboard spool adapters out there have the following problems: 1. They fall off 2. They slip during AMS rewinding 3. They are so large that they require you to leave the AMS lid propped open so that they don't rub on the…
*NOTICE* If your duct is not centered to the nozzle, please print the offset version of the duct that offsets the ducts 2mm to the right to try and correct for this. There does not seem to be a reliable pattern for what machines need the…
Tweezer rack for Ikea Skadis pegboard system. Multiple slot sizes are included to accommodate different size tweezers. Should be printed with supports for the Skadis hook regions. Remix: I enlarged the original model to fit the larger…
The source marked this model as adult content.
Hello 3D Printing Enthusiasts! This Thing is my version of Soldering Tweezers! Simply print the long base, 4 handles, assemble, and you get a super versatile wire holder for your soldering station! The original tweezers design was remixed…
These craft tweezers come in handy for grabbing small items with precision. Available in two tension options -- v4 for soft tension and v5 for firm tension -- these tweezers are especially useful for crafting with my pony beads and for…
This is an open-source Plastic Antweight combat robot, intended for the SCAR component kits available from Turnabot and Team Malice. This and other community designs can also be found on the Team Malice website . It placed 4th overall at…
Modular stand V 2.0 The possibility of adding modules as desired. V 1.0 https://www.thingiverse.com/thing:2495885 Print instructions Category: Organization Print Settings Printer: Vertex K8400 Rafts: No Supports: No Resolution: 0,1…
Print without support. In Prusa slicer it is better to use Classic perimeter generator (instead of Arachne) and disable “Detect thin walls” setting. For fast printing increase number of perimeters to 4 (for 0.4 nozzle) and disable “fill…
Tweezer holder for the Ikea skadis pegboard system. Original OnShape file available here https://cad.onshape.com/documents/a23dd4002928da9978ebafd8/w/d15acd308e77d01db89f5ccf/e/2e32cb14af912c3bb6e348b6 Print Settings Supports: Yes…
Remixed from the original pistachio opener on Thingiverse. I really loved using them, but wasn't sure what to do with my hands after cracking the shell open and trying to get the nut out with my fingers. Now the tweezers immediately grab…
A remix of the 6 tweezers version if you have 9 tweezers to store
The original design is taken from Miguel Camba , who was inspired by Alexandre Chappel's drill bit tray . I reworked the Fusion360 file to have a better adjustability. It is not perfect yet, but spacing, widths and lengths are now fully…
Remixed it to save 10 gramms and maybe better airflow. Test it yourself too!
Please refer to https://www.printables.com/model/581649-elegoo-neptune-44pro-cable-chain and https://www.printables.com/model/596277-elegoo-neptune-44pro-cable-chain-new-90deg-mount-z/files for the full set of files you need to print for…
Great original design by QED. Reinforced tweezers to hold your Multimeter Probes Print in PETG preferably for strength and a little flexibility.
this is a remix: https://www.thingiverse.com/thing:2384216 The great design of pzonyga didn't really grab the tip for me because the thin arms deformed a little when they went together. So I made the tweezers a little more massive and…
Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…
Tired to print almost half a kilo of plastic for a box? This is the answer! :) At the moment this IS the most lightweight (in both weight and printing time) poop chute I am aware about. The walls are thin - 1.2mm in order to be perfectly…
Small but useful tweezers, which is easy printable with ~3g filament within ~10min. Here is a short movie. Check how well the tip surfaces coincide with each other. Its one side is designed flat for easy printing. Have fun!
use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports ANGLED version to be printed upright STRAIGHT version to be printed flat on bed use 4…
Info: I liked the original a lot (thanks @M4NU !) added grip lines at both ends of the tweezers, so it can hold things safely i have found it useful for my usage Asembly: just fold it, no glue needed (just like original) Print settings:…
Prints upside down without any support!
I shortened the height so I could use the original air duct. You can stick to the print instructions in the original model I just changed the size. Due to the temperature, PLA is a problem as it gets closer to the plate. The original air…
Made sides wider, stronger and with angles to easily slide on the tweezers. Also, it prints horizontally and has an easy grab to remove it. To attach to a multiboard, either push it into one of the tile connectors like I did or use one of…
Tweezers holder for Honeycomb Storage Wall.
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
Pictured is Overture neon green silk PLA with 0.2mm layer height. Just print all three pieces and glue together. The hollow shell design of the plumbob is lightweight but reinforced in the area that attaches to the clip. Perfect for Sims…
3 winged boomerang 4 winged boomerang 5 winged boomerang
This is my take on building the perfect gaming mouse. Just 27 grams, without sacrificing ergonomics. It’s based on the Logitech Superlight 2, and in my opinion, it carries the legacy that Logitech has built over the past two decades far…
The 4x1 box works with both straight and curved tweezers, the 3x1 box only works with curved tweezers
I recreated the design of well known [BRAND NAME] plastic anchors, making one side of the thread flat for easier printing. I used 100% infill to maximize strength, but you might achieve sufficient durability with a lower infill setting.…
Lightweight minimalist cat bookend. As its light so holds up about 4/5 books
2 winged version 4 winged version this is 5 winged version 6 winged version
I've been packing for a week-long hike and needed a container for lip balm and salt; I wanted ones that weight less than those small travel containers available in drug stores and that are sturdier than zip bags. So I reworked my previous…
The perforated honeycomb walls reduce material usage while maintaining strength. If you want to ensure all waste goes exactly where it should, make sure you use poop deflector
Ever wanted to build an UK Ant weight / US Fairy weight, but you've had no idea where to start? The SVRN platform is a system I've developed and extensively battle tested over the last year to help get you started. The base robot is a 4wd…
Simple tweezer holder to be used with the honeycomb storage wall .
Gridfinity Tweaked Licence Creative Commons with Attribution 4.0 See: https://creativecommons.org/licenses/by/4.0/ Full text in LICENSE file included. Author: Tim Watts <[email protected]> Copyright: 2023 Source code: Gitlab This aims…
JST Tweezers These tweezers are specifically designed for effortless disconnection of JST connectors. BENEFITS: Designed for FDM Printing No support needed Smooth Operation
Little tray for 3 tweezers to be hung on a Ikea Skadis board. The model should be printed without support. Print it upside down (I have uploaded the STL in the “to be printed” orientation). I used a 3mm brim to help secure it to the bed.
Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…
The lightest stealthburner fan cover, decreased the toolhead weight. 9/18 Updated step file Print Settings Printer Brand: VoronDesign Printer: Voron2 250 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15 Filament: Other ABS Red Category:…
Digital Multimeter Tweezers – DIY SMD Test Probe This is a custom-designed digital multimeter tweezer attachment that I designed from the ground up to make testing SMD (Surface-Mount Device) components faster, easier, and more accurate.…
Spool for using with Rosa 3D filament refill. Print twice push it firmly to the both sides of filament refill.
Saw this video by Optimum on a super lightweight mouse mod and wanted to make my own perfect mouse - both super lightweight and the productivity of my MX Master. The result ends up being 60g total, and retains pretty much all of its…
Holder for 4x Tweezers to mount on a IKEA Skådis Pegboard. Update the pictures. My original tweezer holder broke as it was, pointed out in the comment, to tight dimensions. So I printed the new model in PETG. Had some strings and a bit of…
💙 Enjoying the Freebies? I love bringing these concepts to life and sharing them with you. If you'd like to support the channel or sell physical prints of my designs, check out the links below: 🔓 Commercial License: […
Remix of “all” the other AMS risers. I completely rebuilt the model. I have adjusted a few things. Dimensions minimally adjusted Break-out cable entry at the front and back 20mm x 20mm hole pattern on the sides to enable attachments to be…
I needed a simple and lightweight front cover to protect the joysticks and the screen when traveling light, so I made one. Two versions: partial cover and full front cover: Prints as a single piece in the P1P and X1C (and any larger…
I print it from PET-G too, but best are from PC - Carbon. 5. Nov. 2023 Added side version
simple cross tweezers. Useful for soldering delicate parts, holding wires etc. tough-version can be used when more force is required, normal version (less spring force) when handling delicate objects. Instructions print (no support/raft…
Lightweight glider plane for kids
Today, I was putting together Perler Fuse Beads with my cousins when we ran into a dilemma: There was only one pair of included tweezers. I happened to have my computer open, so I hopped onto Solidworks and threw together this .stl so I…
The Hybrid Betweener Tired of having to swap betweeners depending on the material you are printing and its ventilation needs? And where do I keep the spare betweeners when they are not in use? This project aims to provide the only…
Say hello to Sylvester and Tweety caught in one of their classic cat-and-bird moments! This fun and playful figurine captures Sylvester proudly holding up Tweety, probably still plotting how to finally catch that clever little bird…
Just tiny tweezers for little stuff :)
Cover to protect electronics from dust and wet. I can make designs for other models too. As i can see in this model difference only in arms length (5-10in) 🚨 Looking for a stronger version or have wider frame arms? Check out my updated…
Shelf for Ikea Skadis boards, 20x10cm in size, attaches with t-clip system. Print settings 0.4mm nozzle any layer height no support default infill any rigid filament
UPDATE I added a version with airflow splitter. I think it cools more evenly. And also a version for FFA5X ! So i moved the fan lower and added a MK4S shroud. Also CFD tested it. And it cools great :P You'll need 2 5x3 magnets. Works with…
Holds two simple tweezers upright. Print the left and right hooks flat, angled edge up, and attach them with self tapping 3x12 tapered screws. As the hooks are separate, you can easily print different shape hooks to work with your pegboard.
A general-purpose easy-access tool rack built on the Gridfinity system. Intended to be a tool rack that fits most basic hand tools and prioritizes ease of access. Most side cutters will hold themselves by the handle, saving the tips. Most…
A set of 3D printed tweezers in five different shapes. Perfect for modeling, electronics, or small repair work. Each tweezer tip has a unique shape – from fine to strong grip. Easy to print with no supports needed and a small hole for…
This is a spring-like mod for multimeters that can turn the regular probes into a tweezer-like probe. This is nice as it can free up a hand in some use cases. Insert the wires first into the slot then slide the mod down until the probes…
I printed this with 3 walls, no infill, no top layers, and a .2mm layer height.
A parameterized gridfinity container. The pre-meshed models use a 0.6 thick wall, overall making them lightweight without the usage of vase-mode/spiralization. Features: Thick and Thin base (thick base = less space in the container, but…
Gridfinity Tweezers box - 10 pieces This is an optimized version of the “Gridfinity tweezers box” by MarB (Thanks a lot for the .step file) I added various fillets, made the baseplate slightly thicker and removed unnecessary features. It…
Tweety Bird Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
some easy-to-print, basic tweezers for optimum strength print with enough perimeters so it turns completely solid in case you need flat surfaces at the tip, you can fold a piece of sand paper so it's double sided and carefully pull that…