1 / 3
Multimeter probe tweezer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix model of a DMM probe tweezer that makes your measurements much easier an quicker.
- Ocena
- 4,72 / 5
- Polubienia
- 940
- Pobrania
- 4250
- Wydruki
- 53
- Wyświetlenia
- 10 415
- Oceny
- 50
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 53) (Komentarze: 63)Remiksy (0)Kolekcje (1143)Powiązane
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro.
Description
This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling out. It is compatible with many multimeters and voltmeters and has been reinforced for durability, ensuring reliable measurements without worry.
Printing
- Supports: Recommended due to slight overhangs.
- Material: Any flexible yet durable filament works well. PETG is recommended as it provides a good balance of flexibility and strength.
- Settings: The rest of the print settings are up to your preference.
Set-Up
- Carefully remove the supports.
- Push the probe cable through the opening at the top.
- Secure the probe into the tweezer.
Tip: Avoid pushing the probe in too forcefully, as excessive pressure could cause breakage, even though the design is reinforced.
Additional Notes
- If the fit is too tight, try lightly sanding the openings for a smoother grip.
- Works best with PETG for long-term durability.
If you find this model useful
- Download and post a make.
- Leave a review with your feedback.
- Share your own print file.
- Let me know of any need for improvement.