Liczymy pasujące modele…
Made for Mustool MT11 Pro, with lead holders on the sides. I designed it with the silicone case on, so if you don't use yours, it will be sightly loose. Printed with PLA, 0,2 mm layer height, placed on the 45 degree face.
Mad a little Gridfinity holder for the 7 Function Multimeter from Harbor Freight.
Minimalistic holder for the Parkside Multimeter to Ikea Skadis pegboard
This is a holder for the two probes for the Rigol Desk Multimeter DM3058 and others. I printed it in white PETG and laying on the side with support (for the clips)
Gridfinity holder (2x4) for the aneng AN8008 multimeter. I have printed it with 0,3mm Layerheight - everything fine.
It took me over a year to finally stop procrastinating and model up a bin for my Klein Tools MM400 Multimeter. The thing is just so hard to measure. I tried scanning it a few times but was never happy with the results. I finally decided…
This is a simple bracket that allows you to mount your AstroAI multimeter in any type of clamp. This was created for the DM2000, but should work for other models
This is a stackable Gridfinity bin for the Peaktech 2025 multimeter. In the lower section there is enough storage space for all the accessories included with the multimeter. The bin fits the standard 42 mm grid and has a size of 5x3x10.…
Ended up with someone's unwanted multimeter, but but it was missing its battery cover. I modeled a simple replacement cover. It lacks the kickstand functionality, but it's so much better than the piece of duct tap that was holding the…
Multimeter probe holder for easy one-handed changing. Two probe sizes with a diameter of 10 mm and 8 mm. держатель щупов мультиметра для удобного изменения одной рукой. Два размера щупов диаметром 10 мм и 8 мм.
Rugged box for my multimeter I bought for €5. It will probably not be too durable so I wanted a case for it. It fits great without rattling and the probes fit without disconnecting them (I fear the connectors are cheap and would break…
Make this out of a soft filament like TPU, it will NOT work with PLA or other rigid plastics This is a protective cover for the Mastfuyi FY106b (probably fits the 106A too, not sure) but also has slots on the back to run wrist straps (i…
Multiboard/Multibuild holder for your Bil Tema Multimeter (art. 15-133) You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in with a Folded Locking Bolt , but there are multiple other options…
it seems simple but it took about 10+ prototypes to get it fitting just right and printing well with a 0,6mm nozzle, i printed it in ht-pla but there are probably more suitable materials for it no supports needed, 100% infill, you can…
Efficient Skadis mount for UT139C Multimeter. I tried to use multiple hooks and mounts but none worked for me so I redesigned my own. My Skadis Peg Board is mounted on a slope so I needed a fearly sturdy system. This fixture holds up…
A custom-designed bracket to mount an AstroAI DT132A Digital Multimeter onto the IKEA SKÅDIS pegboard system. This holder keeps your multimeter organized and easy to access in your workshop.
This is a Gridfinity-compatible holder designed specifically for the Mastech MS8233A multimeter. The model comes in two sizes: 2.5 × 4 (custom size for my Gridfinity layout) 3 × 4 (standard) The holder is designed to store the multimeter…
This is a Honeycomb Storage Wall (HSW) holder for a KS Tools multimeter. It fits into a standard HSW slot and allows you to store the multimeter neatly and within easy reach on your workshop wall. This model is a remix of an existing…
I designed this stand to hold the multimeter securely on a desk, with two dedicated slots for the test leads
This is a Skadis-compatible holder specifically resized to fit the Technics FK8250 multimeter. It allows you to mount your multimeter securely to an IKEA Skadis pegboard for a cleaner workspace. Remix Changes Compared to the original…
Prints without supports. While I use with 1" on center metal and wood peg board, There are Sy's peglock for many kinds of walls. Sy＇s Peglock - Locking Pegboard System by StellasFun | Download free STL model | Printables.com Sy＇s Peglock…
This is a functional, minimalist holder designed specifically for pen-type multimeters . The mount allows you to keep your diagnostic tool accessible while maintaining a tidy workspace. Key features: Dual-Clip Design: Securely holds the…
RUS бокс для мультимтра b850 по задумки нужно будет в поять магниты или вклеить так что фалы блендер эта заготовка стл готова к печати ENG box for the b850 multimeter according to the plan, you will need to solder magnets or glue them in…
The multimeter sits securely in the holder. You can rotate the function dial effortlessly without the device wobbling or falling out. There is enough space to wrap your test leads around multimeter. This bracket may also fit other UNI-T…
This is a holder for the UNI-T UT131B Multimeter, without the rubber cover. Includes a holder for the test lead cables. It can conveniently stay on the wall while in use, or can easily be taken down if one wants to. Made for the IKEA…
Case for storing a Ferm multimeter. The insert allows you to place the device with additional batteries - 4 AAA pieces. The model has 2 ways of using the box (closing): Printing the TPU bands and sliding them onto the box (photo 4). I…
I wanted my multimeter off the bench and easily viewable from where I sit at my workdesk. I also wanted to be able to grab it easily if I needed to move it. A shelf was the right height but the angle was wrong for viewing if mounted…
Hey everyone! Just wanted a screw mount version of this. All credit to 3d addict @Bourgeois_2851285 for the design! This is my first post so go easy on me, I've been learning to design in blender for a few months now and done some more…
I've widened the meter holder with a wider opening to accommodate ports. I removed the thermistor storage, since my Fluke doesn't have it, and instead added a bigger storage behind the meter to the left. The probe holder is slightly…
Added multiboard support to this multimeter holder. It fits a Klien Tools MM420 and possibly other models. I used the following: Tree supports for multiboard attachments. 2mm layer height. 3 walls. 25% Infill Requires 2 multiboard flush…
I designed these to work with my Craftsman multimeter probes, they may or may not work for yours. The probes snap in so that they will not fall out. Printed without supports using 95A TPU. Do not print with PLA or any filament that is not…
This is a replacement case for a Radio Shack 22-810 pocket multimeter. My old case broke and I love this little multimeter. Used to be my dads so it means a lot to me when I use it. There is the case STL and a template STL. The template…
Prints without support, since Baeoniq's SKADIS template included support in the model. Apologies for the restrictive licensing, it came from the original models.
A magnetic stand for your Alientek multimeter. Pretty sure it requires the "luxury" version of the multimeter with magnets in the back. Has 2 slots for 15mm magnets to glue in. Works pretty well for me so far. f3d file attached so you can…
This is just a replacement for the original Fluke adapter. We often lose them at my work so I just modeled the replacement. It fits the Fluke IR189USB IR serial interface and works with 187, 189, and whatever other Fluke multimeters this…
With these hangers you can sort and arrange your cables and/or Multimeter leads. Printed with my MK4 in PETG. I printed standing, with supports, which give the part more stability. Explore my other Printables:…
Milwaukee Digital Multimeter belt clip 3d model because they dont have one
Replacement battery door for Agilent/Keysight U1271A and U1272A multimeter
If you're tired of throwing all your lab PSU leads or multimeter measuring tips into a box, print this. It works with the Hirschmann Test & Measurement PMS 2600 set that I bought from voelkner:…
You'll need 2 universal peg. No Support. %10 infill. My first time uploading a remix-model here, please correct me if I did anything wrong.
I made something like a lightweight case and holder for multimeter probes and cables, for easy carrying. All the parts are glued together after printing.
Organizer for a multi meter, probes and user's manual. The lower box has a cut out so that multi-meters with probe connectors on the bottom do not have to be taken out of the cradle to be used. There is a false bottom for the user's…
make sure to print with lots of support, try to not support the part that clips in, this adds a lot of material to remove after and can make the fit a little too tight
I made this in Tinkercad to fit my multimeter. Very tight fit with cable holder. Use heatgun or similar if too tight. can be bought here: https://amzn.to/3tRcMsx
A holder for a multimeter up to 94x42mm with additional holders for the test leads.
The Aneng AN8002 is an excellent meter for the price, but the hard plastic case is slippery and it doesn't offer much protection from falls. So I designed a boot for it. I expect this will also fit the AN8008 and other similar models from…
This is a basic gridfinity holder for a multimeter with rear-attached probes. I used a Kobalt brand multimeter for the design, but gave enough tolerance that similar designs from other brands should work, provided the probes are held in…
Voici un support en 3 parties qui est simple à imprimer pour multimètre. Il s'adapte aux plaques ikea Skadis.
Wanted a holder for my multimeter that is easy to grab. There is a slot for the multimeter, as well as, a slot for the probes. Feel free to tinker: https://www.tinkercad.com/things/htkaNsVCoCQ-kaiweets-multimeter-multiboard-holder Print…
My multimeter (UNI-T UT61E) probes hang loose and can get untidy. The probes dangle and can get caught and break. To help reduce this dangle problem (but not eliminate), I came up with this design to allow the attached probes to be…
A simple holder for a multimeter. Built for the multiboard using the multiconnect system. Same/similar design as https://www.printables.com/model/781857-multiboard-multimeter-mount except sizing of large side is: 80w x 40d x 80h.
I printed multiple holders and mount for this Multimeter and this is the best one, I just wanted it to fit to the IKEA Skadis pegboard
I made a simple Miltimeter Holder for IKEA skadis wall. Designed for model DT - 9205A with a separate cable container, possible you can fit any other type or model.
Since there didn't seem to be any case available for this old meter I decided to make one. Fits very well, nice and snug with a little stretching needed to get it over the corners. Printed out of Polymaker Yellow TPU (was the only one I…
A 3x5 holder for the Klein Tools MM700 in it's included pouch that works with the gridfinity system.
Skadis Fluke 107 Mount Uses a qty of two 20mm diameter X 3mm thk magnets
This is a replacement knob – not the complete knob assembly (see assembly diagram) – for the Fluke 79/29 Series II (2) multimeter sold in the early-mid 1990s. Fluke reference designator MP23. Part number 885843 (896129 for the 29). Print…
Fits for multimeter size (WxD): 66x28 mm. The angle of inclination is 10°. Bin dimensions (WxDxH): 67.8x25.4x32 mm. The model is created using the build123d python library.
Made for Mustool MT11 Pro, with lead holders on the sides. I designed it with the silicone case on, so if you don't use yours, it will be sightly loose. Printed with PLA, 0,2 mm layer height, placed on the 45 degree face.
This mount has a section for the Multimeter itself, the two cable ends and a space for the batteries so they don't passively drain when not in use for extended periods. Two mounting options are available - either via command strip via the…
Wanted to hang my probes, nuff said. 8mm gap. Used the easy-printing pins and cleat system from @BigRedButton's screwdriver hanger. The pins are the exact same file as the origin. I would also suggest printing…
Digital multimeter holder for a pegboard. The holder supports the multimeter in an upright position, allowing easy access to the display and control dial. The multimeter holder is designed with slots on both sides to securely hold the…
Increased the space since the cheap knock-off I have of the multi-meter is 25mm deep instead of 24mm as in the original.
Mad a little Gridfinity holder for the 7 Function Multimeter from Harbor Freight.
A Small hook For mounting A multimeter with a 9.5mm x 29.5mm mounting hole
Pegboard isn't great for 3d printing so I've switched to multiboard and wanted to hang up my multimeter. This remix keeps the mount in the multimeter and you can simply slide it on and off your multiboard using a multipoint screw.
A holder for a ANENG 683 smart multimeter with holders for the test leads. Print suggestion: 0.20 to 0.28mm layer height 15% fill
Dies ist ein Case für ein Multimeter VC155 des Herstellers Voltcraft. Es bietet Platz für das Multimeter selbst, den Temperaturfühler (unter dem Multimeter) sowie diverse Kabel, Ersatzbatterien, etc. Als zus. Hardware werden benötigt: 2 x…
The Kaiweets HT112B multimeter has a parasitic battery drain problem when it's off. I modified it to run off a rechargeable lipo battery so that it can be easily recharged instead of having to change the coin batteries. Designed to be…
This pegboard module snaps into your pegboard and holds a multimeter along with its probes. I printed mine in PLA+. It should fit any pegboard with a 45mm hole pattern and 4mm holes.
Had this older DMM that I was using and no stand available that housed the probes, so, I made one. I want to say that this may work for other DMMs as I have heard some of the low cost DMMs out of Asia these days my actually be the same…
Designed for a friend to hold his probes while he is using his multifunction meter, attaches onto the top of the Fluke 1663
If you use an "EXTECH EX330" multimeter (although this also happens with other brands), you may have noticed that sometimes when storing it, the "NCV" button gets pressed. This causes the batteries to drain. To solve this, you can use…
This is a simple replacement stand for the Zoyi/Zotec ZT-703S. It may work with the ZT-702 as well but I don't have one to test with. I print it standing vertically with the top hinge side on the heatbed but you may find another…
This is a holder for a Düwi 07976 multimeter for the IKEA Skadis Pegboard. It may fit other multimeters, the dimensions can be read in the attached PDF document.
Multimeter lead connector plug. Redneck version of test lead pin jacks - I needed a solution now - to order, I would have had to wait 2 weeks. The connector pins are from Deutsch 2 pin DT connector. You can buy the pins separate. You may…
Use M3x30 screws to assemble the latches → Like these ones Or use grub screws for a better look→ Here Two latches need to be printed.
I designed a wall mount for my digital multimeter. It's a Hama EM393B ( Link ). There a two screw holes to fix it at a wall, a cable reel on the back and two holes on the side to plug in the two test prods. Print Settings Printer Brand:…
This design to be used with FNIRSI DMT-99 Multimeter. It could be used with other multimeters. Inside diameter for multimeter is roughly 75t x 79w x 28d mm. The lead holder is detachable from the main body by 3 magnets. They are roughly…
I printed this in PA12 (nylon) which shrinks a little. The 2mm probes fit snugly and the ring inner diameter is 38mm. Nylon might take away 0.5mm or so. Supports were not needed. A hot ring will be easier to fit. Let it cool down on a…
Minimalistic holder for the Parkside Multimeter to Ikea Skadis pegboard
This is a holder for the two probes for the Rigol Desk Multimeter DM3058 and others. I printed it in white PETG and laying on the side with support (for the clips)
IKEA Skadis multimeter holder for the Aneng AN8009 Multimeter link to in on Aliexpress . Uses the T-Nut system so print 2 nuts to mount the model to the board. No supports needed. BOM: x2 - M2.5 DIN934 Hex Nut x2 - M2.5 DIN7991…
Gridfinity holder (2x4) for the aneng AN8008 multimeter. I have printed it with 0,3mm Layerheight - everything fine.
I own two multimeters and wanted to design only one type of box, so it is pretty universal. The max multimeter size is 200 by 45 mm measurerd on the side of the multimeter. The overall box i made with the GridfinityGenerator This is a…
Gridfinity 3x5 bin to store the TACKLife DM01M Multi-meter. Has a bottom pocket to store the test leads, so that it does not clutter up. See photos.
It fits a standard 42mm gridfinity grid. It takes up 2x4 grids. It fits my XL830L multimeter which is 142mm in height and 71mm in width. There's some extra clearance in the corners so it fits a variety of multimeters 0.4 nozzle uses 103g…
Keep your workshop tidy with this Gridfinity-compatible holder for your Extech digital multimeter and probes. It stores your tools securely, saves space, and ensures everything is organized and within easy reach.
When I searched for Skadis multimeter holders for my cheap generic multimeter I didn't find one that quite fitted (most ones for specific models where too small) or had features that I didn't like or didn't work for my multimeter. So I…
A simple remix of @createminds ' HSW Multimeter Holder Uni-T , allowing it to attach to a Multiboard. I moved the HSW attachment points from the side of the original design and added two Multiboard Peg/Click Hooks to the back instead.…
A stand for the Harbor Freight Multimeter that will hold it in a good readable position freeing you hands up. Storage for the probes and leads.
