Multimeter Tweezers Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tweezers holder for multimeter probes
- Ocena
- 4,833 / 5
- Polubienia
- 263
- Pobrania
- 710
- Wydruki
- 9
- Wyświetlenia
- 1997
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this model from scratch. The original design is really good, but I wasn't satisfied with the probe holders. The walls were too thin, and the rounded bottom didn't print well and eventually snapped.
Even though I redesigned the model from scratch, I wanted to credit the original author Print@Hive for the arms and spring mechanism, which I based my design on. It's a great design.
I printed in PLA, 0.15mm layers, 10% gyroid infill (you don't want it too stiff). I'll probably reprint in PETG or ABS.
Update: I just printed the 10mm model. The Mastech probes I have taper toward the back, so they aren't held as firmly. Post your makes/comments if it works for you. Does it need to be tighter?
Update: My probes came out if I put too much pressure, so I added tighter fit (smaller opening). I suggest using the tighter version. I tested the 9mm one and it works better - much secure grip.