Nice case for your Multimeter or...
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice and sturdy case for your multimeter or something else. Unscaled the max. measurements for the multimeter are…
- Ocena
- 4,875 / 5
- Polubienia
- 81
- Pobrania
- 565
- Wydruki
- 14
- Wyświetlenia
- 2743
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A nice and sturdy case for your multimeter or something else.
Unscaled the max. measurements for the multimeter are 200x100 mm.
The outer size is max. 208x170.6 mm (lid).
Included is a version with and without "Multimeter" at the outside.
Needed extra hardware: 2x M3x30 machine-screws/bolts for the hinges. The holes in the hinges for the screws/bolts are narrow enough to tap its own thread. In other words no nuts needed.
Happy casing:)
Look for more tools and the like here: https://www.thingiverse.com/Coat/collections/coats-toolbox
Print Settings
Supports:
No
Resolution:
0.2 or 0.3
Infill:
10%
Filament:
Jupiler PLA, ABS & PETG
Notes:
0.2 resolution will give a nicer result at the mitered edges.
Empty weight / used Filament around 220 gram.
Category: Tools