1 / 10
Drylin Style Bushing RJ4JP-01-08 RJ4JP-01-10 (LM8UU and LM10UU direct replacement) — zdjęcie 1
1 / 10

Drylin Style Bushing RJ4JP-01-08 RJ4JP-01-10 (LM8UU and LM10UU direct replacement)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Original version is the exact same thing that you can download from IGUS website.

Ocena
4,8 / 5
Polubienia
74
Pobrania
925
Wydruki
11
Wyświetlenia
3003
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2.

V2 is the modify version from the original, I read somewhere on the internet that said this pattern works better than the original. I cannot really confirm that or back this up. But if you are interested in trying it or test it, you can download this version.

I do not actually design this bushing, all credit goes to IGUS or whoever design it. Again, Happy Printing.

UPDATE:
Upload the 10mm version since someone ask for it.

Print instructions

Category: 3D Printer Parts Print Settings

Printer Brand: RepRap

Printer: Prusa MK2

Rafts: No

Supports: No

Resolution: 200, 100 microns

Notes:

Design to print in PLA because it seems to work the best compare to other filaments. Print best with 3 perimeters and at least 10% infill. Layer height does not matter.

Tagi