1 / 3
Drylin polymer bearing clamping block 8mm RJ4JP-01-08
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clamping mount for drylin polymer bearings. These are meant to replace a standard SC8UU aluminum housing.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (13)Powiązane
This bearing block is meant to clamp onto drylin 8mm polymer bearings. The housing uses 4 lobes to apply even pressure on the plastic bearing. The clamp is secured with an M3x18mm screw and nut. M4 screws are used for mounting and the holes are slightly undersized so that threads are formed as the screw is inserted.