Liczymy pasujące modele…
For fast printing, I lacked rigidity. That's why I created this Y-motor mount for a belt 9 mm with a support bearing. This Y-motor mount is suitable for printers: Ender 2 Pro, Ender 3, Creality CR-10, Tevo tornado and Sovol SV01. Also,…
When I tried to use the supplied axle with my PolyDryer on a roll of Sunlu ABS with a broken ring, I found the spool wasn't lifted enough to avoid the bottom rollers. About that time I saw the One-Way Check Valve video from @clough42 and…
A simple yet working 3D printed bearing, works just fine and can be used for any purpose. Printed with 0.4 mm nozzle. Printing & post-processing Print in highest possible resolution. Minimalize the stringing. Use any lubricant to…
20mm bearing riser for Eibos Cyclopes dryer. Works w/wo my wall riser. 3mf included Fast to print and it's doing it's job For better airflow
I designed and made a connection bearing for rolling wash of a developing tank. This connection bearing connects the developing tank and the motor, making it convenient to wash the film. The connection between the developing tank and the…
Print two the same parts and assembly with the bearing and 4xM4 nuts Material PET-G layer: 0,25mm
The bearings were constantly pulling off my print bed, and failing my print. I modified the gears and fused the bearings to the outer ring. The gears still spin with just the inner ring being unconnected.
IMPORTANT : cut the model so its height is about 2/3 the width of the spool: Print recommendations: 0.2 layer height, 0.4 layer width random seam position or scarf seam concentric top infill
I uploaded this model so other people don't have to waste an hour printing just to find out that it doesn't fit at all. I tested it as shown in pics. Works 100% with WMVos 's side mount:…
This is a direct bolt in replacement for the brass bearing plate on the solenoid box side. Uses an R8-2RS bearing. Only works on early dampers with the round shaft.
From the first time I got my MMU, I didn't like the margarita style spool holders for the buffer, because it requires space that I do not have. I came up with this solution. It can accomodate up to 4 spools on top of Prusa MK3. I only use…
About the model: A simple 608 size bearing replacement for when you can't be bothered to order the real thing for your simple little 3D print and would rather just print the bearings too (we've all been there right?). They spin very…
This was a stepping stone to get to the fidget spinner I also posted, I figured why the heck not post this one too, it's pretty cool! This bearing is a frankenstein, it has a ½" ID with a 1-3/8" OD (a mix between an R8 and R10 bearing…
Bearing roller for Ender3 spool. You will need to use a very good adherence to print the pin vertically. And ofc, you will need to print 2 nut models. Bearings are "skate standard" size (608zz for example). All credit and gratitude to the…
My friends and I ended up using the original Universal Bearing as more of a fidget than what it was intended for, so I decided to try making a fidget-specific version. When printing at 85% scale and the outside facing upwards, I had…
This has been designed to fit my ALKO 8" jockey wheel with a tube body diameter of 48.10mm and diameter of 30.20mm for the handle hub. I find that rain enters the top thrust bearing and makes it harder to raise and lower the trailer and…
I had printed out the original, but the F695 bearing i had was really loose in the arm. I adjusted the bearing tolerance to be 13mm even down from 13.3mm. This seemed to let the bearing I have pop in gently and fit snug. Let me know if…
This remix is for anyone with leftover 625-2RS bearings from a Voron build. I took the stand and rollers from my dry box design and streamlined the base to be used without the container. (Of course, you could use the original without the…
A 1:1 scale model of a vehicle brake caliper, two piece rotor, bearing hub and spindle. Uses real tapered roller wheel bearings so the rotor spins freely! Mounted on stand legs to make a very nice desk model or even an educational tool to…
This spinner was a personal challenge to come up with something that looked different from my other spinners. I also wanted to design something that printed quickly. On my Anycubic Kobra Pro 2, the spinner and caps only took 31 minutes to…
This is a very niche application design, but why not share? Designed for larger rotor or "UFO" style kites, this 3-part hub accepts a 688 bearing by press fitting it into the center sleeve and has two stopper cuffs to keep it in place on…
I remixed TallackMedia Gridfinity 608ZZ Bearing Holder to hold 28 688zz bearings with both versions the 3u and the 6u Stackable. Both versions have tight tolerance to hold the bearings in place.
More 3D-Printed RC cars here. Btw, I made a new, better RC Car: It's available here: This 3D Printed RC car requires some components: https://itkacher.com/pages/3d-printed-rc-car-parts-list-bom
It's a tyre I adapted for a 608 bearing to a nicer look. It can be printed using any filament but best rendering with TPU.
I printed recently a tube for 608 bearings, I found on Marker World site. And I was frustrated to don't have similar tubes for the other bearing references I owned. So I completely redesigned several tubes to store my 625 and 606 bearings…
After realizing models of bearing tubes to store 606, 608 and 625 bearings https://www.printables.com/model/1316811-bearing-tubes-with-id-ring-for-606-608-and-625-bea I've been asked to create corresponding Gridfinity bins. Here there…
The bearings are composed of three interlocking rings that can slide past each other to reduce friction. Printable bearings are great for prototyping because they are lightweight and easy to work with. Quick tips for successful print: Use…
peli 1510 to 608 bearig adapter ali pu wheels.stl - for narrow PU wheels from aliexpress (0.75 wider spacer, instead pelican wheels) peli 1510 to 608 bearig adapter.stl - for regular pelican wheels
I took the cross section of DontWorryAboutIt 's Hill mount bearing and modified it to fit Ivan Urbánek 's Strurdy mount for Hadley telescope . To build it you will need a bowden PTFE tube (4mm diameter, less than 1 meter long), 12 M4x10mm…
These ready to print drop-in inserts will help you convert your Ploopy Rev. D from using the standard roller dowel style bearings to 2-mm ceramic G5-grade bearings. It may work on earlier revisions of the Ploopy, but this is not the STEP…
This is used to install the front bearing of a Hobbywing 4268SD g3, but may work for other motors. 1) first make sure your bearing can slide over “guide - BearingCenterTool” and that “press - hammer press dowel” can also slide over “guide…
I needed a way to attach a bearing to a bike handle and quickly made this design. By default, it was made for a 22mm tube with a 608zz bearing and 2 Ø3mm screws, but it is easy to adjust these dimensions to your needs through the given…
I purchased a Motion Pro 08-0550 Steering Head Bearing Race Driver Set and wanted a holder to put them in my toolbox, the race adapters snap in place.
I printed them with 100% infill using PLA. I froze the bearings/seal and warmed the jet pump housing in my kitchen oven at 200F. Then I used a dead blow plastic mallet to pound them in. Tools are still in great shape and show no…
I needed something that could easily move to different positions along my filament line and could swivel so it was at the correct angle to provide the least amount of friction. This filament guide, when used with the Multipoint Rail…
You'll need four 608 ball bearings, four M4 x 20mm button head screws & 2 hex nuts, plus the original M3 x 18mm screw used on the original filament guide. 2026-04-06: V2 addresses an issue reported by @mgranger114
About Storage tube for 16 MR52ZZ bearings (5mm outer diameter, 2mm inner diameter, 2.5mm height), the tiny bearing in the K1C extruder. It's a bit of a chonker, should help to actually find them back. Print instructions 2 walls and 15%…
Custom designed for the medium of FDM with ultra-precise tolerances and all parts 3D printable. The ball bearings are comprised of three parts with a zero-tolerance press fit. The housing fits 12 of these ball bearings. I recommend…
Requires a 9mm wide cardboard cutter I added 8mm version ---2026/03/21
Printable Bearing without support DONT USE BRIM PTBR - Rolamento imprimível sem suporte NÃO USAR BORDA
A quick adapter to use common M3 screws to secure 608 bearings. Not as strong as using an 8mm bolt - but plenty secure for a lot of projects. Hardware needed: M3 x 25mm FHCS screw M3 nylon lock / nyloc nut Print as oriented. No supports…
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
I had a surplus of POM wheels and an idea on how I could make a linear bearing from them. It is a little wobbly so it isn't perfect for very rigid single bearing needs but if you use two of them you could stabilize a platform or…
Updated June '26 - Increased tolerances for print-in-place hinges. My 5KG spool holder. Features: Small foot print, minimalist looks. Support for mutiple spool sizes Print in place hinges for top loading of new spools Four 608 bearings…
This is a thrust bearing for use in other projects. Print instructions: Use PETG, 0.2mmlayer height (was clogging at 0.15mm with 0.6mm nozzle) Supports: off Infill: 60%, gyroid (we want no crossings) Perimeters: 3 Print all items flat…
About Very simple 3d printed bearing with few improvements to similar bearings I have seen. Improvements: Smallest tolerance I could do with PLA on Prusa Core One (0.1mm between inner and outer ring) Small bevel for easier mounting Making…
Overview This is the filament spool axle for a filament holder equipped with a load cell. A brake may optionally be installed to limit coasting. Designed in FreeCAD , source files included. Designed as an extension/replacement of the…
Looking for quick, fun prints to spread some holiday cheer? This collection of holiday-themed fidget spinners hits the sweet spot between festive and functional. Each design features clean silhouette-based shapes—Christmas trees, snowmen,…
Rings and grid for axial ball bearings. The enclosed version keeps the parts together.
This is an improved bearing hold-down plate for the Anycubic ACE Pro, designed to be stronger and to add adjustable tension to the filament drive assembly. Properly holding down the drive wheel shaft and bearing is critical for reliable…
You can buy these airtight boxes on AliExpress: "3D Printer Filament DryBox Storage". I redesigned the holder for them because I really didn't like the standard one. A heavy TPU spool didn't want to rotate on it at all. I found cheap…
I added the K1 style slip ring, then rotated it to fit the Leote's Sidle panel. It should fit the all the side panels Leote has released for the K1 Family, but posting them all as remixes to show up on the earlier ones seems to me a…
The turntable model published by @DIVO3D_2177560 required a rather expensive bearing that didn't really seem necessary for overall functionality, so I made a printable version that costs pennies and only requires 6mm bearings and 6x3…
v1. This mod for the ercf v2 thumper blocks lets you replace the servo with a pair of 625 bearings. v2. I used 6 mr95zz bearings (commonly found in idle wheels on a 3d printer) and tiny m2x16mm to make this version. the dual axles…
This dust cover is designed for the Z-axis bearing on the Flashforge AD5M (Adventurer 5M). It may also be compatible with the AD5M Pro, but I don’t have that printer to verify - your feedback is welcome. Based on feedback from other…
Update: Added parts for 2kg spools. -"spoolholder_center_2kg" -"spoolholder_tube_2kg" This spool holder uses the original bayonet fitting "puck" from the CORE One+ spool holder. When this one is printed and assembled, it can easily be…
Remixed v4cascade's model of a V block with bearings to fit 608 size bearings. They should press into place.
Filament stand for 1KG spools. Shaft is hexagonal to make printing horizontally easier. Printing horizontally is better for strength. Requires 2x 608 bearings Print instructions: 1x Base, print without supports 1x Shaft, lay horizontally…
An essential part to ensure the longevity of the bearings on the Floatwheel ADV/ADV Pro, especially for wet and off-road use. It helps limit the ingress of moisture, water, and dirt into the original bearings, which unfortunately are not…
A simple 3D-scanning turntable designed for makers, designers, and anyone capturing models for 3D printing. The base uses four 608 bearings for smooth, stable rotation, and the top plate sits securly on the bearings for easy spinning.…
EN Stand for large 5 kg filament spools. The print does not require supports. Final assembly is done by gluing the parts together with cyanoacrylate (Super Glue). Press 608ZZ bearings into the rollers. then insert the spacer sleeve from…
a 4 bearing fidget spinner it takes 5 22.4 mm bearings you can get them for pretty cheap off Amazon
I didn't have any spare 608ZZ roller bearings on hand, but I had a number of 6900ZZ roller bearings. The 608ZZ has an outside dimension of 22mm and an inside dimension of 8mm. The 6900ZZ roller bearings have an outside dimension of 22mm…
Plastic replacement for aluminium sleeve that comes with Aliexpress LEBYCLE bearing removal tool. Plastic reduces marring to hubs and frames. Can upload a parametric .f3d version if different bearing side diameters are needed, file just…
Description I've printed the original one but my roll inner tube diameter is a little bit bigger. So it fits flabby. So I've remodeled the head part with 40mm external diameter. Also adopted it for easier printing without supports…
I needed a bearing puller for the Cyber Grinder, and decided to make one. This also might work for the Aroma 3, but I haven't tested it. It's based on a 1/4" bolt and nut. Basically one handle for the bolt, and one handle for the nut.…
Spin pure pixel love without a single bearing ❤🌀 The Pixel Heart Multi Spinner is a unique 3D printable fidget spinner featuring four pixel hearts arranged around a smart, self-centering core that spins smoothly without any bearings .…
This is a compact 3D-printed bearing retention plate designed to securely capture and locate a flanged bearing. The plate features a press-fit bearing pocket that centers the bearing and prevents it from walking out under load, along with…
Overview I designed this part to simplify the process of turning a standard SBR20 rail into a motorized linear actuator. Instead of designing a complex separate motor mount and idler system, this part clips directly onto the end of the…
A tiny spin of pixel love ❤🌀 The Pixel Heart Spinner is a compact 3D printable fidget spinner shaped like a classic pixel heart , featuring a cleverly designed spinning center that allows smooth rotation without any bearings or extra…
A 3D printable bearing that spins well (0.3mm clearance between two races). No ball bearings needed. Feel free to use lubricant to improve longevity! Note: Second Image = V2 (races won't come apart); Third Image = V1 (races WILL come apart)
A spool holder with bearings to make it easier for the printer to feed the filament. I printed this out of ABS, but PLA or PETG would work just as well. I used two 6003 bearings. The original spool holder works with a ring. I need a…
A compact, modular rotating yarn holder designed for smooth and stable yarn feeding. The bearing ensures effortless rotation even with small yarn balls, preventing tension on the yarn. The base can be weighted with concrete or fine sand…
Just added more wall mount screw holes. and split the roller body for easier printing.
FreeCad Parametric Thrust Bearing. The 3MF Models create a thrust bearing of 104 diameter, using 40 X 5mm bearings. The FreeCad source file has a spreadsheet in it that has all the necessary dimensions to change for the thrust bearing you…
You have a 635 5x19x6mm bearing hole but only have 625 5x16x5mm bearings and don't wan't to design an adapter? Here it is!
Description Smooth running ball bearings built from 3D printed parts and airsoft pallets. Low cost, easy to make, and ideal for custom, non standard sizes. Available sizes: *if you need a size or shape that is not listed in the table,…
A Guide for a Hand powered metric external thread tapping with a metric standard tap holder. Works well on soft metal rods such as aluminium, copper and brass. Tougher metals will produce swarf that will quickly wear out the bearings even…
Typical bearing, uses .177 BBs. Stop print around layer 23-24 to insert BBs. Ensure zhop is high enough so the extruder does not knock the BBs out. Slow print speed down as well helps to keep them in place.
This is remix of the tophat from the ERCF V2 inspired from the bearing Jack Rabbit mod. You need to print the bearing holder from this mod and my Tophat because the one part of that mode don't fit en the V2. No need to add support, they…
The new CORE ONE L printer uses anti-vibration mounts on the Z-axis trapezoidal screws. I modified the model to fit on the CORE ONE / + printer. My Core One + after phase stepping calibration, reduced the vibration of the "Y" motor by 93%…
Spool holder with bearings for Honeycomb storage wall. You need two bearings 608 ZZ, M8x60 screw and M8 self locking nut.
Have you ever thought of combining a bearing, a gyroscope and a gear fidget toy? Probably not, but here it is, and it is a true adventure for both your fingers and your drifting mind. It is easy to print and assemble, and it needs no…
This project is a bottom filament guide system designed to improve filament feeding for the Creality Ender-3 V3 KE. The goal of this design is to provide smoother and more controlled filament movement when feeding from below, reducing…
I needed to store some bearings I had lying around, so I designed this to hold exactly 10 units. This container has a snap-fit lid with an additional lip to keep dust or debris out—whether you're storing metal skate bearings or 3D-printed…
For this filament spool holder, I wanted to avoid using ball bearings because I did not have any at home. Honestly, using bearings for this purpose would also be a bit of overkill. Another goal was to fit the widest possible spools. In…
This 3d model of fingerboard wheels with internal bearing lock will give you a head start in wheel making journey. To make this model work, you'll need strong 3d design knowledge, and aim yourself with patience. Tuning and tweaking the…
Smooth Spool Holder (606 Bearing, Fully Printable, No Supports) This spool holder was originally designed to hold yarn rolls for my wife. By the time I finished it, however, most of the yarn was already gone — she’s completely addicted to…
since I had 608zz ball bearing lying around and didn't want to by the smaller ones, I've adapte the rollers and the basis to fit the lager bearings. I've also added the axis to avoid using the M5 screws
A new version for the “Lifter Roller” with ball bearings. I had the problem that the screw thread had eaten into the lifter roller (see pic), causing a lot of friction and making it very difficult, or even (if I pushed slowly) impossible…
Just caps for the fidget spinner that I have uploaded.
Note - There is a support piece built-into the model where the bearing will fit. These blocks are similar to the ones that come with Ender 3 dual-z axis kits, but are modified to allow them to be secured to the vertical aluminum…
