1 / 7
Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness — zdjęcie 1
1 / 7

Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Chisel and Plane Iron Honing Guide

Ocena
4,706 / 5
Polubienia
1115
Pobrania
2232
Wydruki
17
Wyświetlenia
13 184
Oceny
17

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Low profile chisel and plane iron honing guide. No bearings are required. 

Assembly

Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way. Turn the knob counterclockwise to separate the jaws and install the guide pins through both jaws and screw them into the frame with the threads. You may need pliers for that. Then slip the other frame side on, and they should hold with friction. Next, install the top connector (m3x5) screws). Attach the small knob to the main screw (clockwise side) and then the roller (m3x10) screws. 

The angle guide STEP file is ready for multicolor, but I included an STL for single-color printing.

NOTE: 
It's best to print the roller with random seams. This will prevent a pronounced bump when you roll it across your sharpening surface.
 

Required Hardware:

  • 3x M3x5 head cap screw
  • 2x M3x10 (or longer) head cap screw 

Tagi