Liczymy pasujące modele…
Made this to hold the cheap but effective SATC Premium Diamond Sharpening Stone that you can find on Amazon. It's the 400/1000 grit plate. The measurements on amazon say it's 7.8 by 2.75inches, but it's a little off. I made this so that i…
Simple but sturdy base, better ergnomics than just a flat plate on a desk. I added some rubber feet to prevent slipping but double sided tape should work in a pinch. Regular PLA 3 walls 15% infill
Sled outer dimension fit standard Shapton sharpening base 216x70mm Sled inner dimension designed to fit 10k natural stone size 150x50x10mm https://www.amazon.com/dp/B07TJQNG1R?ref=ppx_yo2ov_dt_b_fed_asin_title
Hello! I appreciate Mr. Vitaly12 for the idea that has helped improve this project. Usually, I tend to over-engineer things, but this jig is designed for stones with a thickness of 60mm. I based the measurements on the PARKSIDE stone…
Sharpening Station for Sharpal Diamond Stone and Strop A compact and practical 3D-printed holder designed to keep your Sharpal diamond sharpening stone and leather strop neatly organized and stable during use. This model was created to…
Wanted a simple guide to sharpen all my knives. Created few prototypes before having this last version which is the most convenient for me.
This is a jig to hold a saw sharpening file at the correct angle when sharpening a woodworking handsaw (not a chainsaw). I have done versions 0, 5, 8, 15 & 20 °. I used a 3mm heat insert and 15mm M3 bolt to hold the file
This tool for uniform pencil sharpening designed for standard 7 mm hexagonal pencils, but also can be used for sharpening pencils with similar size and other shapes (circle, triangle, etc). Tool don't need supports for printing. You can…
I created this holder to fix my SHARPAL Diamond stone on a wooden based, this allows me to have multiple sharpening stones aligned on the same base. This holder has two 3mm diameter holes 100mm a part to hold it in place. I printed it for…
Horl 3 Premium Organizer & Sharpening Station Streamline your sharpening workflow with this custom-designed holder for the Horl 3 Premium knife sharpener. This station is engineered to keep your workspace organized and efficient, ensuring…
Template for sharpening lathe chisels. Used to adjust the distance between the guide bar and the grinding wheel. For example, for a Tormek grinder.
Just a stand to store the grinding wheel for the MR 13 A, B, or G drill sharpener Vevor Juste un support pour stocker la meule des affuteuse de foret MR 13 A ou B ou G Vevor
With this jig you can use your knive sharpener also for sharpening chisels. I use a TSprof Kadett though other devices like this should also work. The 3D has two slots (16 and 6 mm) for holding and aligning two sizes of chisels. If yours…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
I have bought a dozen or more diamond sharpening stones and they all seem to have the same dimensions, so I made this box to hold the 6 grits I use to get that near razor sharp edge before a strop is applied making a truly scary sharp…
A tray for the sharpening helper from https://www.printables.com/de/model/147202-whetstone-sharpening-helper. Snuggles around the rails and has a tub to catch the water for the sharpening stone as well as fixing points to clamp the tray…
sharpening guide for chisel on belt sander with 30 degree angle you need 3 M6 screws and nuts The length of the screws depends on the width of the chisel. I used screws with a length of 40 mm. I printed it upright with 4 walls and 25%…
Simple jig. Use M3 screws on top, and an M8 screw and 608Z (or similar) bearings.
Three models one for the 400/1000 grit stone, one for the 3000/8000 stone and one for the flattening stone. I found that my 400/1000 stone was slightly longer than the 3000/8000 but I am not sure how consistently manufactured these stones…
a guide to sharpen your knife at the right angle with added legs to grip on a 2 inch wide knife stone
Interlocking guide for sharpening kitchen knives. Degree of inclination of 16 degrees. The support base is removab
Intro: This an angle jig for your chisel or planer knife sharpening. It works best with the triangle shaped honing guides that you can find in most stores. I've attached of the picture of the one I designed it around. The flip stops are…
This jig can be used to sharpening any chisels or handplane blades on a whetstone. Needed: M8 bolt M8 nut 2x 8mm rods Ball bearing with 8mm inner diameter You can make this jig as big as you like with different rod/ bolt lengths…
This item is designed to help keep your sharpening stones organized. Designed to fit Shapton and Nano Hones stones with dimensions around 8.27" x 2.95" x 0.67" / 21 x 7.5 x 1.7 cm Water channels will drain the water to the front of the…
Tips are appreciated and go towards creating new designs There are a number of bevel gauges that can be bought for very reasonable prices. These tend to cover a select set of bevel angles which are most commonly found on various tools,…
Need help finding that exact sharpening angle? These are helpful when you suck at sharpening. (sorry the photos are of them on my old anet a8) EDIT: Fixed an issue where the number were not attached to the blocks.
I needed a box that would fit 8 diamond sharpening stones for Ruixin. I think these should also fit Edge Pro. Fits stones up to 165mm length, 24mm width and 9mm thick. Fusion model is attached; there you can theoretically modify these…
I really liked CNCKitchen's sharpener design, but I wanted some extra refinements, making the construction a bit simpler, using not so many different types of screws. So here's my remix. Changes from V2.1: redesigned handle for quick…
Made this to hold the cheap but effective SATC Premium Diamond Sharpening Stone that you can find on Amazon. It's the 400/1000 grit plate. The measurements on amazon say it's 7.8 by 2.75inches, but it's a little off. I made this so that i…
The Katz-Moses sharpening guide from kmtools.com is more than a bit fiddly to align properly without dropping your chisel a dozen times during the process, so I designed a jig to hold everything steady and get you close to the two most…
Guide which fit your knife to make it easier to keep a constant angle during sharpening. The overall size is very similar to the remixed model so the angle calculations taciucmarius has in the description should be pretty accurate for…
A tool for sharpening the tip of a drill bit. The angle of the tip of the bit is 121° degrees. If your angle grinder has
A quick ~20min print. Stays in place well; I have been holding it with my off hand at the bottom. Print without a brim.
Passend für 60x120er Schleifsteine. Einfacher zu verwenden, einfach nur waagerecht halten das Messer. Verschiedene Winkel als Vorlage. Unter dem Schleifsteinhalter kann eine Antirutschmatte eingeklebt werden. Ich verwende hier PETG, ist…
Tool to setup the sharpening angle of the sharpening guide. Made to print upright, to avoid support. You can fit it to your personal guide and iron by changing the following 3 user parameters: IronThickness = 3mm Thickness of the plane…
Hardware needed: (2) ¼"-20 X5/8" machine screws (2) ¼" washers (2) ¼"-20 square nuts (4) 4mm x 18mm bolts with nuts (4) 4mm knurled threaded insert nuts There are 3 files so far. One does not have a lip and allows you to adjust the…
Just a quick model I made to attach a Shapton glass stone to a board while still being able to take it out if needed. Due to tolerances in the stones, consider printing it at 101%
Printed at 0.20mm layer hight with 10% infill and i was able to print it without any supports. I used PETG but other materials will probably work aswell. Printed on Creality Ender 3 V3 SE.
I've really grown fond of the cheap 160 mm x ~23 mm diamond sharpening stones that are available for just a few dollars on places like AliExpress. Without buying the sharpener they are designed for, I haven't an ideal way to hold them in…
A gridfinity bin for the DMT D2K Mini Diamond Sharpening Stones 3 pack (*https://a.co/d/jlBTein) the bin measures 5x1 units and is 4 units tall.
I had an inexpensive knife set which, while serviceable, was not as sharp as quality knives I've used before. I already had basic sharpening stones up to about 600 grit, but it wasn't good enough. Most people suggest kitchen knives need…
Magnetic blocks to hold a knife at different angles to sharpen with the Tumbler sharpening system. A 15/20 degree block is standard with the Tumbler, but Japanese knives like Miyabi require an 11 degree block. I've included a bunch of…
hey this is my knife sharpening jig. it holds a knife in place with magnets while sharpening. there are 3 variants (15°, 20° and 25°) you will need 2 m3x10mm bolts and 2 m3 nuts as well as 5 10mmx3mm magnets. it is best to lubricate the…
This is a remix of the metric remix by @energeticinterpretation44 of the original model by @GarageTimeDavid_3790 All I did here is to enlarge the M6 holes slightly so that M6 bolts have proper clearance. All kudos to the original makers.
This is a handle for the blade of a Leatherman Surge while sharpening. Use the Original screw to fasten it to the handle. NB! Do NOT use this as a knife. This model will not withstand it. Be careful when handling sharp objects!
This is a simple sharpening jig with a 30 degree angle for planer blades and similar objects. Blade can be clamped down with an M5 screw and a suitable nut. Assemble and use as shown in the picture.
I love my Lansky sharpener set, but I hate having to pry out each part from their provided case and assemble each stone every time I want to use it. Besides, the factory case doesn't provide a place for other accessories such as their…
This is a base for holding standard thin diamond sharpening plates in a position that is comfortable for sharpening. It holds 4 plates and has tolerances fine tuned to ensure a good hold and enough clearance for the top plate to stick out…
Simple but sturdy base, better ergnomics than just a flat plate on a desk. I added some rubber feet to prevent slipping but double sided tape should work in a pinch. Regular PLA 3 walls 15% infill
Diamond Sharpening Stone/plate Holder for 2.48x5.94 Inch sets (the 5 pack sets) that can be found for cheap online. Magnet holes are for 6mm x 3mm button magnets. No special printer settings needed. I printed it on an Ender V2, with a…
I recommend scaling up to 1" on the sides (166%).
Print upright, no supports necessary. infill 15% - 30% recommended. Specifically designed to fit inexpensive thin diamond sharpening stones found on amazon, with foam attached to bottom. adds 20mm height for table/handle/knuckle…
The container of my pencil sharpening machine has broken. I have therefore developed a replacement. Please see picture of the measurements! Best printed in clear PETG, but I just had black one at home.
Protection sleeve for a 2 sided diamond sharpening stone. The diamond Sharpening Tool: https://www.amazon.de/dp/B07WJJLFMX?th=1
Holder for diamond sharpening stone stone size 170x75mm Infill 15 wall 3 no support
This modified handle works with the sharpening tool by CNCKitchen . It was recently reviewed on Made with Layers . I seemed to be simple and overall well built. I have several flat and wide diamond stones. I modified the handle so it…
For good stability I printed with 3 perimeters and 20% gyroid infill.
I got tired of holding the metal edges of the sharpening system brace, and much to my surprise I couldn't find a print to add a handle anywhere, so I made one! Printed at 100% it fits my sharpener just fine, but you may need to adjust it…
A blade 20° sharpening guide using 6x2mm magnets. Super glue to attach the magnets might be a good idea but I haven't needed to. I was able to push fit them into the holes.
I just recently got Savannah GrindMaster sharpening system and needed a way to store all the accessories out of the way. The multi grind jig arm is extremely long and gets in the way when not in use with my 8" bench grinder. The turning…
Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 130°. Насадка подойдёт для сверла диаметром до 10 мм, угол 130° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…
I found the original model lacklustered. The holders did not have 8mm holes for the rod. The extrusion parts where hard to fit. The clamping mechanism was lacking options and the holders had lefthand threads probably due to a mirroring of…
Diese Schärfvorrichtung habe ich in einem Video eines sehr geschätzten Youtubers gesehen, den er von einer ebenfalls sehr geschätzten Firma hat. Hier ist meine Variation davon mit fixem Winkel zum Hinterschliff des Freiwinkels. Ihr könnt…
You should probably change these settings! The .3mf file contains VLH, temperature, & fan cooling settings for PETG. It is set up for a draft print, on a GEEETECH FDM printer, with 0.8 nozzle. We THINK these angles will work for this…
A guide (2 actually) for sharpening the end of a carpenters pencil. One version has a curve and is best used with a scalpel or snap off blade, the flat version can be used with most tools, a trimming knife or a chisel. Print in the…
Ein Modell von einem Schärfgitter um Sägeketten einer Kettensäge zu schärfen. Ausgelegt nach den Vorgaben von Stihl mit 30° Schärfwinkel. Nicht Passend für die neuen Hexa Ketten von Stihl, diese werden laut Hersteller mit einem Winkel von…
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
10, 11, 12, 13, and 14 degree angle guides for sharpening tools. (knives, blades, axes, etc..)
It's always frustrating to accumulate dull drill bits: they are completely useless, but it would be annoying to throw a bit which would potentially be as good as new with a small amount of grinding. However, properly sharpening a drill…
Vymodelováno ve FreeCADu. Vyžaduje vyříznutí 8 závitů M5, 4 šrouby M5x16, 20, 25 , 30. Vrtáky upínat s vodorovně umístěným břitem. Pro vytvoření druhé plošky - podbroušení, pootočte břit proti směru hodinových ručiček.
Attachment for a sharpener with an abrasive wheel for sharpening drills, angle at the top 118°. The attachment is suitable for a drill with a diameter of up to 10 mm, an angle of 118° can be used for most types of drills. The attachment…
4-in-1 whetstone knife sharpening aid for sharpening knives by whetstone for angles 14°, 17°, 20°, 25° Print in Place
Шаблон для заточування свердел, розміром з кредитну картку, доступний українською та англійською мовами.
Holds 2 Blades at a time at a user specified angle. Uses 6 M3x12 Button or Socket head screws and M3 nuts for assembly. I include multiple versions at different angles to cover most common cases. Print Settings: PETG, 5 Walls 5 Top and…
A drill sharpening gauge to ensure correct cutting edge angle and that edge lengths are equal. Equal edge length is vitally important for drilling true and to true size. The gauge is designed to accept a 150mm (6") steel rule. My rule…
Knife Sharpening Angle Guide with rectangular slots for magnets (5mm x 10mm x 2mm). Size 35mm x 35mm x 6.63mm (L x W x H) Can be scaled and maintains angles. Print Settings 0.12mm layer height (0.2mm Nozzle) Supports: On
Scythe sharpeningstone quiver STEP file included Perimeters: 5 Infill: 25%, gyroid Supports: no
Printing: Main Gouge Clamping Body - 40% infill or higher, print on flat backside Lower Hinge Post and Assembly - 75% infill, 10mm brim, print vertically Main Clamping Body - 40% infill Horizontal Base - 20% infill Follow JL Designs…
This is an alternative to the plastic sharpening stone holder sold by Sharpening Supplies for use with the all metal, diamond encrusted, Diasharp sharpening stones as well as the Sharpening Supplies one sided strop. The base was printed…
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
Klýnky pro snadné vymezení a kontrolu správného úhlu při ručním broušení nožů. Úhly 10°, 15°, 20°. Klínky slouží jen pro počáteční nastavení nože na brousku a případnou průběžnou kontrolu. Nelze s nimi pohybovat po brousku spolu s nožem;-)
This is a sharpening jig for the Shopsmith lathe chisel set. The intent of this is to replicate the functionality of the sharpening jig that has been discontinued. The sharpening guide allows you to sharpen the Shopsmith lathe chisel set…
Sled outer dimension fit standard Shapton sharpening base 216x70mm Sled inner dimension designed to fit 10k natural stone size 150x50x10mm https://www.amazon.com/dp/B07TJQNG1R?ref=ppx_yo2ov_dt_b_fed_asin_title
A simple angle guide you can put on the corner of the whetstone to help holding a steady angle. I suggest to print it in TPU with the numbers down. You can use any material, but PLA is really hard and can scratch the knife. Let me know if…
Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 135°. Насадка подойдёт для сверла диаметром до 10 мм, угол 135° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…
Knife sharpening guide Width of the grinding stone 60mm --15, 18, 20 degree, Schleifhilfe für Messer Breite des Schleifsteins --15, 18, 20 Grad 60mm Designed for the Parkside Knife sharpening Stone Printed in PLA No Support needed Infill:…
The gray wedge shown in the image, placed under the sharpening stone, has a very specific and helpful function: it maintains a consistent sharpening angle , in this case 15° , as marked on the wedge itself. Main Function: It helps keep…
Assembly & Printing Guide Hardware: Top Piece: 2x 2.5M heat-set inserts Bottom Piece: 2x 2.5Mx6mm screws (threaded into the inserts) Printing Recommendations: Bottom Piece: Print diagonally (on its small side) for better bed adhesion—use…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
I needed to get a perfect 14 degree angle for sharpening blunt landroid blades. This facilitates extending the blade life and reduce waste.
In this version I added a few mm to make sure the stones will fit even if the printer isn't 100% calibrated.
This is a block and angle guides for diamond sharpening stones which are 15 cm/5.91 inches in length, 6.3 cm/2.48 inch, and 0.1 cm/ 0.04 inches in height. These are fairly widespread and can be found on many outlets online . The stones…
Stone holder, lid and magnetic pocket for the angle guide to be neatly stored. Allows the stone to be used at a nice height. I recommend sticking some rubber dot feet the the underside for grip. or piece of an old bicycle innertube also…
Just glue these two inserts into a cut off arrow shaft to make a handy broadhead sharpening tool. Currently sized to fit a 2219 shaft. More sizes to come Insert is not threaded. you can thread a head into it, but it is friction fit. Print…
Hello! I appreciate Mr. Vitaly12 for the idea that has helped improve this project. Usually, I tend to over-engineer things, but this jig is designed for stones with a thickness of 60mm. I based the measurements on the PARKSIDE stone…
