Attachment for sharpening twist drills on a Bosch angle grinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sharpen your 3 to 10mm twist drills using a Bosch Professional GWS 18V-7 (125mm)
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 451
- Wydruki
- 1
- Wyświetlenia
- 1933
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Thank you for supporting me!
This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!
Design
The attachment presented can be slide on the protection cover of a Bosch Professional GWS 18V-7. It is one with a 125mm blade. Not sure it can be used for any other model. The point angle of the drills sharpened need to be 118 degree - which is the standard for normal drills. Sharpen only very short, the smaller the drills, the shorter.
Printing
Designed to be printed using a 0.4mm nozzle and 0.20mm layers and PETG or PLA. Print it upside down and use organic support from the build plate only.