PARKSIDE sharpening stone jig for knifes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello!I appreciate Mr. Vitaly12 for the idea that has helped improve this project. Usually, I tend to over-engineer…
- Ocena
- 5 / 5
- Polubienia
- 302
- Pobrania
- 468
- Wydruki
- 1
- Wyświetlenia
- 5051
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello! I appreciate Mr. Vitaly12 for the idea that has helped improve this project. Usually, I tend to over-engineer things, but this jig is designed for stones with a thickness of 60mm. I based the measurements on the PARKSIDE stone (IAN480668_2410).
As you can see, I’ve added a 3D wheel (No. 4) with a diameter of 24mm and a thickness of 11mm. Currently, this project is still in the conceptual phase and under construction. I haven’t had time to print it yet.
For assembly, please use four M5x25 countersunk hexagon socket screws along with the corresponding nuts. Theoretically, you should also include four 5.4mm washers with a thickness of 1mm. I have added holes to accommodate neodymium magnets, which will need to be glued in place. Additionally, I’ve incorporated three standard sharpening angles: 17°, 20°, and 25°.
Please test it and give me the feedback!
Jonweb
Category: DIY