PARKSIDE sharpening stone jig for knifes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hello!I appreciate Mr. Vitaly12 for the idea that has helped improve this project. Usually, I tend to over-engineer…
- Rating
- 5 / 5
- Likes
- 303
- Downloads
- 474
- Makes
- 1
- Views
- 5,087
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello! I appreciate Mr. Vitaly12 for the idea that has helped improve this project. Usually, I tend to over-engineer things, but this jig is designed for stones with a thickness of 60mm. I based the measurements on the PARKSIDE stone (IAN480668_2410).
As you can see, I’ve added a 3D wheel (No. 4) with a diameter of 24mm and a thickness of 11mm. Currently, this project is still in the conceptual phase and under construction. I haven’t had time to print it yet.
For assembly, please use four M5x25 countersunk hexagon socket screws along with the corresponding nuts. Theoretically, you should also include four 5.4mm washers with a thickness of 1mm. I have added holes to accommodate neodymium magnets, which will need to be glued in place. Additionally, I’ve incorporated three standard sharpening angles: 17°, 20°, and 25°.
Please test it and give me the feedback!
Jonweb
Category: DIY