Chainsaw Sharpening Guide different magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix (redesign really) to use 12mm x 3mm magnets that I had on hand. Provides visual reference when sharpening
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 173
- Wydruki
- 1
- Wyświetlenia
- 1460
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Visual guide to help align file while sharpening a chainsaw. This uses 12mm x 3mm magnets that I had on hand purchased here: https://www.amazon.com/dp/B09BJYVBR6?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_JSGE5C6P9E539JZ5HK5K This is used when sharpening the chain while still on the bar.
The design is intended to be printed with the groove side down (magnets on top) with a layer change around 1mm and color choices to get good contrast to make it easier to see the angle. I had a spool of green filament that I was trying to get rid of so ended up with black and green.