Liczymy pasujące modele…
Since it can be tricky to accurately hold a block plane’s blade or a chisel correctly for sharpening, this honing guide is designed to help. A chisel should start with one bevel, which is formed on the blade, usually by grinding it at a…
Wydruk około 6,21 €–7,59 € nettoWstępna wycena jednego wariantu
Jig for sharpening of chisels, plane irons and similar. Print instructions: Material: PETG (PA, PC might be a good fit too) Layer height: 0.2 (0.15 should work fine too) Baseplate: Infill: 15% - 20% Honeycomb Perimeter: 3 Top: Infill: 70%…
Wydruk około 4,62 €–5,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Custom holder for metal punch and chisels, stops items moving every time you open and shut tool box draws. Can be re scaled if you want larger/ smaller trays. Set up for single fed printer, two colours, I printed on Prusa mark 3s, for…
Wydruk około 12,83 €–15,68 € nettoWstępna wycena jednego wariantu
Simple jig. Use M3 screws on top, and an M8 screw and 608Z (or similar) bearings.
Designed in fusion 360. No supports are needed. The more infill and walls used the stronger they will be. Please like, follow, rate and upload your makes. Check out my profile for many other models. Thanks for viewing.
My stitching chisel has an 8mm shaft. I designed this to make the tool easier to hold since I have large hands and I was getting cramps after long periods of leatherwork.
This is a remix based on my Expo fine point parts, intended to fit the larger chisel style Expo dry erase markers. To use this you will need to print the rest of the parts for a plot clock. I liked smily77's "V2" arms and PIR mount:…
Introduction The Peggit system is a simple way to attach holders and organizers to your pegboard using simple automotive rivets. The clip easily attaches to standard pegboard with 1" spacing using 15mm x 12mm x 6mm automotive push rivets.…
Copy of the GEDORE Holder 4x Slots 10mm Tools 2x Slots 12mm Tools
6 slot holder for OG Marple chisels. I did this in a rush, so let me know what your feedback is.
My stitching chisel has an 8mm shaft. I designed this to make the tool easier to hold since I have large hands and I was getting cramps after long periods of leatherwork.
Although the original packaging is reusable, the chisel was held in place with a cable tie. This clip fits in the holes for the cable tie and allows you to hang the chisel upright. Printed at 0.2mm, 15% infill, PLA.
Hiermit kannst du deine Schnitzeisen schön und platzsparend an deiner Skadiswand anbringen. Viel Spaß dabei
Custom holder for metal punch and chisels, stops items moving every time you open and shut tool box draws. Can be re scaled if you want larger/ smaller trays. Set up for single fed printer, two colours, I printed on Prusa mark 3s, for…
Wydruk około 12,83 €–15,68 € nettoWstępna wycena jednego wariantu
needed a durable holder for my chisels and screwdrivers after last one kept snapping or falling out. 3 screw through attaching point for extra strength.
This item is for drilling a 2 inch hole into a board and holding multiple size chisels for woodturning enthusiasts.
Template for sharpening lathe chisels. Used to adjust the distance between the guide bar and the grinding wheel. For example, for a Tormek grinder.
Created this for the honing guide that came as part of an Amazon Basics Chisel Kit which had the following angles documented: Chisels: 30 degrees - 30mm 25 degrees - 40mm Planes: 30 degrees - 38mm 25 degrees - 50mm Adding the F3D with…
Mounted Chisel Plow - 9 Shank 10ft - Style 1 - 1:16 Scale Uses M2 Screws and Two M2x100mm rods There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the…
Needed a holder for my cheap Harbor Frieght chisels. Threw this together real quick. Not the greatest design but it'll work for now until I get a nice set. Added a V2, I like it more. Looks better and uses way less filament.
With this jig you can use your knive sharpener also for sharpening chisels. I use a TSprof Kadett though other devices like this should also work. The 3D has two slots (16 and 6 mm) for holding and aligning two sizes of chisels. If yours…
Aufbewahrung für Stecheisen mit Ausbuchtung für Magneten, Storage for Chisel
A chisel holder that can take standard 8mm chisels at 6mm, 10mm, 12mm, 18mm and 24mm (30°-angled). There is a taper at the bottom with oil reservoir (top-filled) so the tips will always be protected.
Vertical chisel holder from MAGG carving chisel set [EAN: 8591715541596] "Magg carving chisel set 12 pcs". Attachment with one SDK 25 screw into OSB or similar. The individual pieces can be joined together with a lock and assembled in…
I wanted to have a wall mount for my Japanese chisels. This worked wonderfully. Infill 20% Support: no Recommended material: PETG, ABS or ASA I wanted to have a wall mount for my Japanese chisels. This worked wonderfully. Infill 20%…
sharpening guide for chisel on belt sander with 30 degree angle you need 3 M6 screws and nuts The length of the screws depends on the width of the chisel. I used screws with a length of 40 mm. I printed it upright with 4 walls and 25%…
Got sick of my Freshly sharpen chisels getting knicked...so I made these. I have ¾", ½", and 1" caps. Please keep in mind…these are made to fit my chisel sets…might need to change scale for your chisels.
This is a Minecraft Chiseled Stone Brick pixel art, filled Solid model.
Gridfinity folder for Narex Richter Chisel, 1/2". Added cutouts for easier retrieval which are not shown in the cover photo. Please see the model. Step file available upon request.
This a parametric model of a Angle Setting Block for chisels and plane blades. It is important to have consistent bevels on your blades and this setup block keeps your angles correct every time. Just line up the chisel or plane blade with…
This is the next iteration of a 3d printable chisel router plane. The original was not great ( Chisel Router Plane 1/2-inch (12mm) by JohnMartin | Download free STL model | Printables.com ) but it worked okay. I had to resolve some…
10% infill, no supports. Fits Harbor freight 6 piece chisel set.
I wanted to be able to carve V-grooves in a lattice pattern, so I created this angled Chisel Plane. This is designed to fit a 13mm chisel. This is the second version, the body is a single piece where the original was two halves that are…
Upgrade your tool organization with the Toom Chisel Holder v2! Designed to hold up to 12 chisels, this improved version features a more refined, modern design, making it both functional and visually appealing. The front boasts logo, and…
Intro: This an angle jig for your chisel or planer knife sharpening. It works best with the triangle shaped honing guides that you can find in most stores. I've attached of the picture of the one I designed it around. The flip stops are…
This jig can be used to sharpening any chisels or handplane blades on a whetstone. Needed: M8 bolt M8 nut 2x 8mm rods Ball bearing with 8mm inner diameter You can make this jig as big as you like with different rod/ bolt lengths…
The model is really stable, so it can be printed with most types of filament. I recommend using PTEG or ASA, with layer height set to 0.10 mm and the setting for “support everywhere” must be turned on. The size of the magnets to be glued…
A gridfinity bin to hold my 3 piece Stanley chisel set (13mm, 19mm, 25mm). Laying flat the chisels would take up 6 x 3 space but my buildplate tops out at 5 x 5 so I designed my own to have the chisels angled downward. The bin is based…
A gridfinity holder for 3 Stanley chisels (½"/13mm, ¾"/19mm and 1"/25mm). Fits in a 6x2 gridfinity slot and slim enough for a tool chest.
https://paypal.me/radicalreel The reinforced version is not tested... but should work too. You have to print it on the reinforced side though.
Creality Yan keski Tutucu - Creality side chisel holder
Chisel Plow - 10 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Chisel Plow - 12 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Chisel Plow - 14 Shank - Style 1 - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
A gridfinity holder for a Stedi scribing tool 4x1x3 units and stackable. This might work for other tools, the groove is about 140mm long and 16mm wide.
This chisel holder is for the Wood River six piece set that I purchased from Woodcraft. I wanted it to provide easy access to the chisels. It includes a blade safety box at the tip of each unit. It also has the size of each highly visible…
sorry but you have to use supports, just juse organic supports. The Toleranzes are perfekt for printing on an XL whit .6 Nozzle.
This simple bracket holds the chisel by the ferrule at the base of the handle, with the beveled top edge catching the handle where it begins to flare out. This should prevent any plastic corners from contacting the chisel and causing…
Here are 13 different size chisel caps to protect the sharp end from damage. I printed mine in TPU. They may fit other chisels, but the taper and thickness may be different. You can scale them in in a slicer program to get different fits.…
Introduction The Peggit system is a simple way to attach holders and organizers to your pegboard using simple automotive rivets. The clip easily attaches to standard pegboard with 1" spacing using 15mm x 12mm x 6mm automotive push rivets.…
To be used with MFT mounting plate - link Required fasteners: 2x M6x16 socket head screw (DIN 912)
Supported brands: Rexid Wezid Europ Shank shape: 10,2x36 mm (S.76)
Storage for chisels. Tested with DICTUM Chisel /Stechbeitel: 26mm, 20mm, 12mm, 10mm, 6mm With labelled compartments: Chisel size Suitable for Festool Sortainer3 SYS 3-SORT/3 drawer. With Gridfinity on the bottom.
This block has space for 16 small chisels. Most slots extend 3" deep into the block. The dimensions of the opening vary. This allows different sized chisels to set into the block and remain vertical. Two slots however have very unique…
I wanted a holder with a more modern look. The loop is not going to last forever as it is very thin, but showcases the strength of the PLA filament.
Honeycomb storage wall holders for various sizes of tools with hexagonal handle such as punch, chisel, deburring tool and nail setter . Holds the tool securely. Tool can be easily picked from the holder. There are holders available for…
This is a remix of the metric remix by @energeticinterpretation44 of the original model by @GarageTimeDavid_3790 All I did here is to enlarge the M6 holes slightly so that M6 bolts have proper clearance. All kudos to the original makers.
***Updated March 2026*** Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to…
Holds a Craftsman 5 pc chisel set on a pegboard. Should fit anything in the slot that is less than .615 inches diameter of the shaft and has at lest 15 mm of room before the tool flares.
A space-saving holder for the SKADIS Pegboard. Designed for 4 chisels or files. The holder is slightly inclined so that the tools cannot fall out. 3 struts provide strong support. Since most of the existing T-nut systems are designed for…
This is a simple holder design that fits a set of 4 YATO chisels such as the ones shown in the photo. It can be screwed to a wall.
Hey All, I have a bunch of cheap chisels and one nice chisel. I wanted a single holder that could be screwed to a surface that would fit them all. This solution works very well for me and allows me to add more as needed without spending…
I wanted something different for my Sharpie Markers that wasn't just the run of the mill pen cup. So I played around in Tinkercad to create this! A stand at a 10 degree angle to hold all of the Sharpie pen Markers. Added another .stl for…
Due to my physical limitations I designed a tool to sharpen my wood chisels on my "Skil" grinding machine.
Wall hanger for Lidl - Parkside chisel kit (6 pieces). available 1-2-3-4-5-6 slots holder bottom end holder must be printed upside down in order to not needing supports bottom holder is large enough for 3 chisels. PLA eSun, 10% tri-hex…
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
The original was a little to large for my meager cheap chisels, so I have reduced the inner whole to 19mm and also increased the entance gap by a couple of mill to. My rusty chisels I will try to save after finding my kids trying to break…
After using the “Leading Edge” system for a bit, I identified several improvements and features that I thought would improve ease of use and overall outcome; the platform felt too flimsy for me, and the old style threaded inserts were too…
Hex end to go on the end of the chisel to keep it from rolling around.
A DIN rail mounting bracket to hold chisels, pliers, scissors, and other such things. You will need to print two tabs for the bracket. They can be found at: They can be found at: https://www.thingiverse.com/thing:3401942 or…
Holds 5 chisels using Sy's peglock mounting system. Fitted for Narex Richters and mortising chisels but should fit other chisels as well V2 Is thicker since V1 seems to be bending after long term use
I needed something to hold my Presch Chisels on my newly created Honeycomb Storage Wall . The hole/holder part is tapered like the neck and the chisels sit really comfortably. You can see the spacing I used in one of the pictures and even…
This is a parametric chisel cap/protector. It is a simple but effective design. Theoretically, you should be able to use this with the thingiverse customizer. You simply enter your chisel's dimensions, choose material thickness and cap…
Print with supports for the holder overhang.
Chisel tray for Zack Freedman's Gridfinity system. The tray holds 4 chisels, each with the following dimensions: ¼" ½" ¾" 1" The chisel manufacturer for my chisels is Marples and the model number is MS500 (I think) for the set of 4…
2 Models here, one for holding the DascoPro Chisel set and another for holding their Scratch Awl. The Awl holder is deep enough that the tip doesn't touch the bottom, it's held by the ring. Both can print without supports!
Single Crystal Diamond (SCD) Tool Box for Storage or Transport Compact, functional 3D printed tool box designed specifically for the secure storage and safe transport of Single Crystal Diamond (SCD) tools. The box is printable without…
Chisel handle This is a handle I made for cheap metal micro chisels available from Aliexpress. I use them in scale modeling, but they come in handy in different task (e.g. they can help with rafts or support removal). Originally they are…
A SAB chisel handle & holder based on the model by side5 , redesigned for FDM printability without supports. Great for ergonomic panel line scribing on Gunpla model kits! Features include: Collet-style grip Knurled tip End cap Optional…
Not the most efficient use of plastic but its solid and stands on a workbench and stays on a skadis wall
A tray on top of atucoms flat adapter in 3x3 to store chisels and the required tools to exchange them. For reference these are mostly 10x10mm chisel holders.
Simple organizer to keep those chisels from banging around. I separated into to (2) models so it can fit on my build plate. They should snap together fine. Please see my other models if you're interested.…
Updated 30Apr23 - See below… This is a variety of push-on protectors for woodturning chisels. If, like me, you tote your woodturning tools to various venues in a toolbox, where they can rattle around and crash into each other and the end…
Chisel holder designed for https://www.amazon.com/dp/B07WPHDX7L?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
What? I felt like making my own. It fits my wood chisels. They aren't the best, and at least one is dull, but sitting on a shelf in my workshop is a waste of space and just not a good idea. During my extensive, 3-minute search, I didn't…
Overview : I wanted to design some parametric sleeves for my chisels to protect them and fit snugly rather than relying on other designs that would be too loose or too tight. I also wanted labels on them. Unfortunately the ones pictured…
Pfeil chisel case Chisels snap into place Case is designed to fit into IKEA KLÄMMEMACKA desk organizer IkeaCase.stl has the cutouts/slots to fit with the wooden box. PfeilCase.stl does not and is just a tray. Video of it here:…
When using a chisel honing guide for hand engravers the chisels don't fit very well and tend to tilt. With this adapter they fit tightly. The adapter can be modified to the engraver blades measurements in the Freecad File.
Helper Tool for engraving chisel sharpeners to adjust the right cutting angle. If you need other angles then 35,40,45 you can set them in the free cad file.
This is a french cleat accessory designed for 1/2in, 3/4in, and 1in Stanley chisels. Printed in PLA laying on its top.
Added size number, fillet, internal relief, and profile to hold. Rhino file attached. Please share if you make another size. Please be carefull with your sharp objects.
