Chisel/ File Handle - Bulb-Style End
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fillowing on from my original File Handle and the Hex Key long axis mount, here is a remix between the two…
- Ocena
- 3,5 / 5
- Polubienia
- 17
- Pobrania
- 106
- Wydruki
- 2
- Wyświetlenia
- 545
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Fillowing on from my original File Handle and the Hex Key long axis mount, here is a remix between the two, i.e. a similar profile to the bulb shape at the back of the hex key handle (https://www.thingiverse.com/thing:3605461), applied for use this time with a chisel (or file).
The hole for the tang of the chisel or file is the same as the previous file handle (https://www.thingiverse.com/thing:3490434), so any adjustments to the width or depth of this hole by drilling etc. can be made similarly as before.
There is a slight change to the profile of the ferrule (a little neater) and the inserts are very slightly smaller to enable an easier fit.
Enjoy!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Doesn't Matter
Supports:
Doesn't Matter
0.2mm Quality
Infill:
20-30% for strength as a tool handle
Filament:
Generic PLA Colour to suit.
Notes:
Brims used by default to save on filament (and the environment!)
Much the same method and process as previously with the first file handle (Thing:3490434) - check this out for further info.Category: Hand Tools