Narex Chisel Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hnadles for Narex tang chisels (8-mm by 9-mm tang) 152-mm (50-mm tang), 132-mm (45-mm tang), and 107-mm (40-mm tang)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 592
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I saw these unhandled chisels on a YouTube channel that I follow (StumpyNubs): https://taytools.com/collections/brands-narex-chisels/products/narex-6-piece-unhandled-bevel-edge-set
I picked up a set as a fun multi-media project. The recommendation is to make your own wood chisel handles - well, why not printed?
These would likely work for the Richter version of the Narex chisels as well.
The design is an octagonal handle at 30-mm diameter. It has a rounded-over tail-end and long (40-mm) taper from octagonal to circular at the business end. A corner of the octagon is aligned with the top of the chisel.
Parts shown are 0.35-mm layer height with 30% fill for the large or 50% fill for the small. Material is Sunlu black ASA. Print temperatures are Prusa-recommended for Prusament ASA. Brim and support are recommended. Ensure support overhang limit is set to 45° or less to prevent filling the tang hole with support. The tang hole is peaked internally so as to not require support.
These are definitely not to be used with a mallet at 30% fill. Maybe at 50% fill. I have not tested it. I can tell you that the handles fit comfortably in my hands. For scale, I usually wear large-sized gloves.
The 1-in chisel has a 50-mm long tang. Use the large (152-mm) handle.
The 3/8-in, ½-in and ¾-in chisels have 45-mm long tangs - use the medium (132-mm) handles.
The 1/8-in and ¼-in chisels have 40-mm tangs. Use the small (107-mm) handles.