307 models
The mounts were printed with a layer height of 0.3. in PETG. No supports are required.it is intended for 4 chisels.
Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant
I described this as"scalable" rather than “parametric” - the clear opening dimension of the model is 25.5mm x 4.4mm and it's a very easy calculation to measure the size of your chisel and scale the relevant dimension in PrusaSlicer. Link…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
The original was a little to large for my meager cheap chisels, so I have reduced the inner whole to 19mm and also increased the entance gap by a couple of mill to. My rusty chisels I will try to save after finding my kids trying to break…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Remove stubborn 3d prints with the chisel, can be used with the pencil mallet in my profile. Sometimes even when you wait for the bed to cool , some prints still dont seem to want to let go, so I made this and the trusty pencil mallet, to…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
The chamfer tool is printed with PETG and do not need supports. To assemble the chamfer tool, use cylinder screws M3x15 (2x) and hexagon nuts M3 (2x). Adjust the tool on your chisel to get the required size of the chamfer.
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Since it can be tricky to accurately hold a block plane’s blade or a chisel correctly for sharpening, this honing guide is designed to help. A chisel should start with one bevel, which is formed on the blade, usually by grinding it at a…
Print approx. €6.21–€7.59 excl. taxPreliminary estimate for one variant
This chisel holder is for the Wood River six piece set that I purchased from Woodcraft. I wanted it to provide easy access to the chisels. It includes a blade safety box at the tip of each unit. It also has the size of each highly visible…
Print approx. €10.48–€12.81 excl. taxPreliminary estimate for PETGSource material: PET
Jig for sharpening of chisels, plane irons and similar. Print instructions: Material: PETG (PA, PC might be a good fit too) Layer height: 0.2 (0.15 should work fine too) Baseplate: Infill: 15% - 20% Honeycomb Perimeter: 3 Top: Infill: 70%…
Print approx. €4.62–€5.64 excl. taxPreliminary estimate for PETGSource material: PET
Fillowing on from my original File Handle and the Hex Key long axis mount, here is a remix between the two, i.e. a similar profile to the bulb shape at the back of the hex key handle ( https://www.thingiverse.com/thing:3605461 ), applied…
Print approx. €3.97–€4.86 excl. taxPreliminary estimate for one variant
Protect against injury and damage - 14-19mm
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Custom holder for metal punch and chisels, stops items moving every time you open and shut tool box draws. Can be re scaled if you want larger/ smaller trays. Set up for single fed printer, two colours, I printed on Prusa mark 3s, for…
Print approx. €12.83–€15.68 excl. taxPreliminary estimate for one variant
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…
This guide is used to get the right chisel and plane projection lengths when using an eclipse style sharpening system. Its pretty similar to the original that it's remixed from except I added a lip to use it on the edge of the bench and I…
Got sick of my Freshly sharpen chisels getting knicked...so I made these. I have ¾", ½", and 1" caps. Please keep in mind…these are made to fit my chisel sets…might need to change scale for your chisels.
This is my "Leading Edge" Sharpening System. NOTE - The LATEST (Major upgraded) version of my system will soon be available as a ready-to-assemble kit from https://www.gritomatic.com . I will not be updating this version on Thingiverse…
Fully Metric Remix of "Better Chisel Sharpening Jig" by @GarageTimeDavid_3790 Changes: Adjusted hex holes from ¼" (11.1125 mm) to 10 mm to fit M6 bolts Adjusted round holes from 8.4 mm / 6.4 mm to 8.0 mm / 6.0 mm respectively
This is the next iteration of a 3d printable chisel router plane. The original was not great ( Chisel Router Plane 1/2-inch (12mm) by JohnMartin | Download free STL model | Printables.com ) but it worked okay. I had to resolve some…
Newer more betterful version Chisel Router Plane 1/2-inch (12mm) v2 - Hand Tool Boogaloo by JohnMartin | Download free STL model | Printables.com I went through several iterations of this before I came up with a design that worked. This…
This is a parametric chisel cap/protector. It is a simple but effective design. Theoretically, you should be able to use this with the thingiverse customizer. You simply enter your chisel's dimensions, choose material thickness and cap…
The Skadis Chisel and File Holders are an addition to the Skadis Universal hook collection by CSD Salzburg . In order to use it, two Universal Hooks need to be printed as well. I added a version for 5mm diameters (e.g. small files), 10mm…
BAHCO brand chisel set holder for your workshop to easily gain acces to all chisels. Fits the 6 pcs chisel set. Printing settings layer height is not critical, I used 0.20 mm Printed on X1 Carbon at 100% speed (normal) no supports needed…
This is a remix of the metric remix by @energeticinterpretation44 of the original model by @GarageTimeDavid_3790 All I did here is to enlarge the M6 holes slightly so that M6 bolts have proper clearance. All kudos to the original makers.
Original model worked great, but I don't have 606ZZ ball bearings and needed metrical clamps. So here is a remix working with two 608 bearings (print the Roll.stl twice and glue them together). Additionally I made some versions of the…
I needed a large number of chisel caps for an assortment of chisels with varying thickness of steel. Designed these after not finding what I was looking for in existing models. Prints quick and does not require supports. The compliant…
The ultimate chisel holder can be used to hang all your chisels so they are always at hand when you need them. Available in five different sizes for all your chisel needs (five was the biggest I could print on my Prusa i3 MK3S+). The…
***Updated March 2026*** Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to…
I needed something to hold my Presch Chisels on my newly created Honeycomb Storage Wall . The hole/holder part is tapered like the neck and the chisels sit really comfortably. You can see the spacing I used in one of the pictures and even…
https://paypal.me/radicalreel The reinforced version is not tested... but should work too. You have to print it on the reinforced side though.
Chisel set holder (or any other tool that fits) Print with 2-3 perimeters, 15% infill,0.4-0.6mm nozzle, 0.2-0.3mm layer, any material will do. No supports needed, print as shown on picture. 2 hooks needed for attachment to the board,…
Note that this is for skewed chisels (as used by woodworkers for cleaning out dovetail sockets etc), not skew chisels (as used by woodturners). Skewed chisels ( like these ones ) have a single bevel at a steep angle and make it much…
Tired of cutting yourself on your chisel when you dig for something in your toolbag? Or sick of finding out that the chisel you just sharpened has been dinged by another tool in the drawer? Fear no more, these guards are easy to print,…
The goal of the project was to make a fully print-in-place tool so no hardware is required but clamping the chisel was never sturdy enough. Not sure one the exact size of the screws used, when the outer diameter of the threads was…
Holder for 8 chisel carving knifes from aliexpress. stl ready to print orientation.
This is a chisel rack that is designed around the Chisels from Dictum. It might work also with other chisels that have a similar tapered neck. The is also a version for a non tapered neck (in this case the file). I included the fusion…
Holder for various chisels and punches
Remix on My previous changes to hold one more chisel
This is an updated version of the chisel holder I made for Jorgensen branded chisels. The interface is a bit tighter, it uses less plastic, but more importantly - it's much nicer to use. The older version would catch when you try to put…
A wall mountable chisel holder. Use two screws to secure it to a wall or object. Two versions are available, one with markings indicating 1", ¾", ½" and ¼" chisels; the other has no markings. Designed specifically for KSEIBI chisels, but…
agmcmll created this amazing router plane: Ajustable Router Plane by agmcmll . It's designed to easily accommodate different chisel sizes--so I'm sharing the channels I had to create for my own tools. I have a Narex ¼" and an ancient…
A neat holder that keeps all your stanley chisels together in order in your tool drawer or on the work bench. Can be super glued down or stuck down with double sided tape. Simple to print with no supports at 0.30 mm layer height and 25%…
Simple jig. Use M3 screws on top, and an M8 screw and 608Z (or similar) bearings.
Pfeil chisel case Chisels snap into place Case is designed to fit into IKEA KLÄMMEMACKA desk organizer IkeaCase.stl has the cutouts/slots to fit with the wooden box. PfeilCase.stl does not and is just a tray. Video of it here:…
Simple 3 Wood Chisel Organizer for use in a Wall Control pegboard.
Remix of the existing Narex chisel mount, but for mounting to the wall instead of a peg board.
A SAB chisel handle & holder based on the model by side5 , redesigned for FDM printability without supports. Great for ergonomic panel line scribing on Gunpla model kits! Features include: Collet-style grip Knurled tip End cap Optional…
Intro: This an angle jig for your chisel or planer knife sharpening. It works best with the triangle shaped honing guides that you can find in most stores. I've attached of the picture of the one I designed it around. The flip stops are…
remix of original model for pegboard with keyhole pattern
Specially made for Kellen chisels. Category: Tool Holders & Boxes
Designed in fusion 360. No supports are needed. The more infill and walls used the stronger they will be. Please like, follow, rate and upload your makes. Check out my profile for many other models. Thanks for viewing.
A space-saving holder for the SKADIS Pegboard. Designed for 4 chisels or files. The holder is slightly inclined so that the tools cannot fall out. 3 struts provide strong support. Since most of the existing T-nut systems are designed for…
My stitching chisel has an 8mm shaft. I designed this to make the tool easier to hold since I have large hands and I was getting cramps after long periods of leatherwork.
I wanted a holder with a more modern look. The loop is not going to last forever as it is very thin, but showcases the strength of the PLA filament.
Gridfinity storage for Parkside Chisel set
Original authors Narex chisel model with Multibuild/Multiboard pegs instead of HSW mount.
This is a remix based on my Expo fine point parts, intended to fit the larger chisel style Expo dry erase markers. To use this you will need to print the rest of the parts for a plot clock. I liked smily77's "V2" arms and PIR mount:…
Helper Tool for engraving chisel sharpeners to adjust the right cutting angle. If you need other angles then 35,40,45 you can set them in the free cad file.
Introduction The Peggit system is a simple way to attach holders and organizers to your pegboard using simple automotive rivets. The clip easily attaches to standard pegboard with 1" spacing using 15mm x 12mm x 6mm automotive push rivets.…
Copy of the GEDORE Holder 4x Slots 10mm Tools 2x Slots 12mm Tools
6 slot holder for OG Marple chisels. I did this in a rush, so let me know what your feedback is.
My stitching chisel has an 8mm shaft. I designed this to make the tool easier to hold since I have large hands and I was getting cramps after long periods of leatherwork.
Although the original packaging is reusable, the chisel was held in place with a cable tie. This clip fits in the holes for the cable tie and allows you to hang the chisel upright. Printed at 0.2mm, 15% infill, PLA.
Hiermit kannst du deine Schnitzeisen schön und platzsparend an deiner Skadiswand anbringen. Viel Spaß dabei
Custom holder for metal punch and chisels, stops items moving every time you open and shut tool box draws. Can be re scaled if you want larger/ smaller trays. Set up for single fed printer, two colours, I printed on Prusa mark 3s, for…
Print approx. €12.83–€15.68 excl. taxPreliminary estimate for one variant
needed a durable holder for my chisels and screwdrivers after last one kept snapping or falling out. 3 screw through attaching point for extra strength.
This item is for drilling a 2 inch hole into a board and holding multiple size chisels for woodturning enthusiasts.
Template for sharpening lathe chisels. Used to adjust the distance between the guide bar and the grinding wheel. For example, for a Tormek grinder.
Created this for the honing guide that came as part of an Amazon Basics Chisel Kit which had the following angles documented: Chisels: 30 degrees - 30mm 25 degrees - 40mm Planes: 30 degrees - 38mm 25 degrees - 50mm Adding the F3D with…
Mounted Chisel Plow - 9 Shank 10ft - Style 1 - 1:16 Scale Uses M2 Screws and Two M2x100mm rods There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the…
Needed a holder for my cheap Harbor Frieght chisels. Threw this together real quick. Not the greatest design but it'll work for now until I get a nice set. Added a V2, I like it more. Looks better and uses way less filament.
With this jig you can use your knive sharpener also for sharpening chisels. I use a TSprof Kadett though other devices like this should also work. The 3D has two slots (16 and 6 mm) for holding and aligning two sizes of chisels. If yours…
Aufbewahrung für Stecheisen mit Ausbuchtung für Magneten, Storage for Chisel
A chisel holder that can take standard 8mm chisels at 6mm, 10mm, 12mm, 18mm and 24mm (30°-angled). There is a taper at the bottom with oil reservoir (top-filled) so the tips will always be protected.
Vertical chisel holder from MAGG carving chisel set [EAN: 8591715541596] "Magg carving chisel set 12 pcs". Attachment with one SDK 25 screw into OSB or similar. The individual pieces can be joined together with a lock and assembled in…
I wanted to have a wall mount for my Japanese chisels. This worked wonderfully. Infill 20% Support: no Recommended material: PETG, ABS or ASA I wanted to have a wall mount for my Japanese chisels. This worked wonderfully. Infill 20%…
sharpening guide for chisel on belt sander with 30 degree angle you need 3 M6 screws and nuts The length of the screws depends on the width of the chisel. I used screws with a length of 40 mm. I printed it upright with 4 walls and 25%…
This is a Minecraft Chiseled Stone Brick pixel art, filled Solid model.
Gridfinity folder for Narex Richter Chisel, 1/2". Added cutouts for easier retrieval which are not shown in the cover photo. Please see the model. Step file available upon request.
This a parametric model of a Angle Setting Block for chisels and plane blades. It is important to have consistent bevels on your blades and this setup block keeps your angles correct every time. Just line up the chisel or plane blade with…
10% infill, no supports. Fits Harbor freight 6 piece chisel set.
I wanted to be able to carve V-grooves in a lattice pattern, so I created this angled Chisel Plane. This is designed to fit a 13mm chisel. This is the second version, the body is a single piece where the original was two halves that are…
Upgrade your tool organization with the Toom Chisel Holder v2! Designed to hold up to 12 chisels, this improved version features a more refined, modern design, making it both functional and visually appealing. The front boasts logo, and…
This jig can be used to sharpening any chisels or handplane blades on a whetstone. Needed: M8 bolt M8 nut 2x 8mm rods Ball bearing with 8mm inner diameter You can make this jig as big as you like with different rod/ bolt lengths…
The model is really stable, so it can be printed with most types of filament. I recommend using PTEG or ASA, with layer height set to 0.10 mm and the setting for “support everywhere” must be turned on. The size of the magnets to be glued…
A gridfinity bin to hold my 3 piece Stanley chisel set (13mm, 19mm, 25mm). Laying flat the chisels would take up 6 x 3 space but my buildplate tops out at 5 x 5 so I designed my own to have the chisels angled downward. The bin is based…
A gridfinity holder for 3 Stanley chisels (½"/13mm, ¾"/19mm and 1"/25mm). Fits in a 6x2 gridfinity slot and slim enough for a tool chest.
Creality Yan keski Tutucu - Creality side chisel holder
Chisel Plow - 10 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Chisel Plow - 12 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Chisel Plow - 14 Shank - Style 1 - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
A gridfinity holder for a Stedi scribing tool 4x1x3 units and stackable. This might work for other tools, the groove is about 140mm long and 16mm wide.
sorry but you have to use supports, just juse organic supports. The Toleranzes are perfekt for printing on an XL whit .6 Nozzle.
This simple bracket holds the chisel by the ferrule at the base of the handle, with the beveled top edge catching the handle where it begins to flare out. This should prevent any plastic corners from contacting the chisel and causing…
Here are 13 different size chisel caps to protect the sharp end from damage. I printed mine in TPU. They may fit other chisels, but the taper and thickness may be different. You can scale them in in a slicer program to get different fits.…
