1 / 4
Hultafors HDC chisel holders
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chisel holders with magnetic attachment
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 33
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The model is really stable, so it can be printed with most types of filament.
I recommend using PTEG or ASA, with layer height set to 0.10 mm and the setting for “support everywhere” must be turned on.
The size of the magnets to be glued in must be 8 mm in diameter and 2 mm in thickness.
3MF-files to the following chisel sizes is attached: 6, 8, 10, 12, 16, 18, 20, 25, 32, 38 and 40 mm
Other sizes can easily be created as the model file uses parametric design.