1 / 6
Sharpening Jig for Chisels and plane irons
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.62 – €5.64 net (excluding VAT)
For file: sharpening Jig without gauges for the MINI.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.13 excluding VAT (range midpoint).
- Weight reported by the author
- 59 g
- Print time reported by the author
- 5.57 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Jig for sharpening of chisels, plane irons and similar.
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 115
- Makes
- 0
- Views
- 1,428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Jig for sharpening of chisels, plane irons and similar.
Print instructions:
Material: PETG (PA, PC might be a good fit too)
Layer height: 0.2 (0.15 should work fine too)
Baseplate:
- Infill: 15% - 20% Honeycomb
- Perimeter: 3
Top:
- Infill: 70% Gyroid (there is Infill only around the bolts)
2x Knob:
- Perimeter: 3
Additional required parts:
- 2x M8x30 DIN933 / ISO4017 Hex Screw
- 2x M8 DIN934 / ISO4032 Hex Nut
- 4x M5x12 DIN912 / ISO4762 Hexagon socket Head Cap Screws
- 4x M5 DIN934 / ISO4032 Hex Nut
Inspired by: