3d print chisel
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.39 – €0.48 net (excluding VAT)
For file: CE3PRO_printbed chisel v1.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.43 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remove stubborn 3d prints with the chisel, can be used with the pencil mallet in my profile.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 200
- Makes
- 2
- Views
- 768
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Remove stubborn 3d prints with the chisel, can be used with the pencil mallet in my profile.
Sometimes even when you wait for the bed to cool , some prints still dont seem to want to let go, so I made this and the trusty pencil mallet, to lightly persuade them to come loose.
0.2mm Resolution, 20% infill, no support, no adhesion.