1 / 3
Chisel sharpening jig for TSprof Kadett or similar devices
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This jig gets clamped into the jaws and sets a fixed angle offset necessary for sharpening chisels.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 27
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this jig you can use your knive sharpener also for sharpening chisels. I use a TSprof Kadett though other devices like this should also work. The 3D has two slots (16 and 6 mm) for holding and aligning two sizes of chisels. If yours doesn't fit you can edit the attached CAD model or ask nicely and I can adapt it for you :)
The clamp piece is attached with two M5 bolts and two heat-set inserts. There are extra holes for attaching your own clamps if you so desire.