1 / 3
Chisel/ handplane blade sharpening jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This jig is for sharpen chisels and handplane blades on a whetstone.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 44
- Makes
- 0
- Views
- 619
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This jig can be used to sharpening any chisels or handplane blades on a whetstone.
Needed:
M8 bolt
M8 nut
2x 8mm rods
Ball bearing with 8mm inner diameter
You can make this jig as big as you like with different rod/ bolt lengths
Recommended print settings:
Either PETG or ABS. It gets wet so PLA isn't good.
>60% infill as you want to be able to tighten the bolt quite alot