Grease / Lube Injector for LMU8 / LM8UU bearings with Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,11 € – 1,36 € netto (bez VAT)
Dla pliku: Injector_m24x3_lmu8_lm8uu_0.2mm_PLA_MK3S_1h27m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,24 € netto (środek widełek).
- Masa podana przez autora
- 11 g
- Czas druku podany przez autora
- 1,45 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Grease injector for Misumi LM8UU, LMU8 linear bearings. Fits Nigrin 74145 multipurpose grease with a M24x3 thread
- Ocena
- 4,889 / 5
- Polubienia
- 53
- Pobrania
- 388
- Wydruki
- 12
- Wyświetlenia
- 2398
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Little helper to inject grease into Misumi LM8UU and LMU8 bearings.
The injector is designed to fit Nigrin 74145 multipurpose grease, which is one of the recommended lubricants for mentioned linear bearings.
The thread size is M24 x 3
I printed it in PLA with a resolution of 0.15mm and 100% infill but I am sure it can be printed with less infill (maybe 20 - 30%) and a resolution of 0.2 mm. Also the used material is not so important.
Support is only needed for the injector to support overhangs.
Thanks to @uepsie who delivered the base.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
150
Infill:
100
Filament:
Basicfil PLA White
Category: 3D Printer Accessories