Liczymy pasujące modele…
Found this GCODE a few years back and found it very useful for cleaning/lubricating my smooth rods. Demo: I use this stuff: https://www.amazon.com/Super-Lube-21030-Synthetic-Grease/dp/B000XBH9HI/ Blurred out in pic as I'm not advertising…
3D printable 608 bearings. If you need a different size bearing, the FreeCAD file is included. Update 2026-04-18: Added a model with half-inch (12.7mm) nominal inner diameter for use with half-inch dowel rods (see photo). It maintains the…
This Gridfinity 5x2 organiser is for all the accessories that came with the lube I bought from 3do. This is a 20ml Syringe. Print with low infill to save Material. Feel free to remix to your liking using the f3d file,
EN: To identify a lubrication pump. DE: Zur Kennzeichnung einer Schmiermittelpumpe.
Could not find a funnel small enough to fill up my containers used for lubricating the idler pulleys of my Bambulab P1s, so I decided to design them myself. The funnels move into eachother for easy storage and fit the containers 10 and…
This is a 1x1 Gridfinity bin for the Prusa lubrication set, with holes for both sizes of the adapter tool and spaces for lubricant tubes. This is based on the lubricant applicators that came with my MK4 kit, for the LM10LUU and LM8UU…
The salty ocean water wreaks havoc on the boom bearings on my Joysway Dragon Force 65. This device makes a simple job of getting the oil there it should be. My own example is printed with Azurefilm 85A TPU, but any flexible filament 95A…
Found this GCODE a few years back and found it very useful for cleaning/lubricating my smooth rods. Demo: I use this stuff: https://www.amazon.com/Super-Lube-21030-Synthetic-Grease/dp/B000XBH9HI/ Blurred out in pic as I'm not advertising…
TL;DR The models were designed to work with a 0.40mm nozzle width and 0.20 layer height, 0.15 layer height is better, 0.25mm nozzle w/ 0.12 layer is ideal. The lubricant should be primed in the syringe tip, and the air should be squeezed…
Tool designed to lubricate 3D printer rails. Holder for kitchen sponge, oil/lubricant should be applied on the sponge. Assembly: Sponge size 10x10x20mm. Use two small pieces of paper to place sponge into holder, remove paper one by one.…
Fits SuperLube 3 oz Silicone Lubricating Grease, model 92003. Features a long nozzle to apply a bead of grease along the leadscrew as well as making it easier to access hard to reach lead screws. Note that threads are intentionally tight…
🛠 3D Printer Cleaning & Lubrication Tool Set This 3D printer cleaning and lubrication tool set is designed to make maintenance fast, precise, and mess-free . The tools help you apply grease or oil exactly where it’s needed – ideal for…
A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…
This CAD model represents a purpose-built tool designed to apply maintenance oil precisely to the center of a treadmill deck, enabling proper lubrication without belt removal or partial disassembly. A strip of firm foam must be added to…
3D printable 608 bearings. If you need a different size bearing, the FreeCAD file is included. Update 2026-04-18: Added a model with half-inch (12.7mm) nominal inner diameter for use with half-inch dowel rods (see photo). It maintains the…
Keeping your 3D printer’s lead screw properly lubricated can be messy and inconsistent—this tool makes it quick, clean, and repeatable. This disposable lead screw lubricator slides along the rod while evenly distributing grease, helping…
I wanted a way to store my linear rail lubrication kit and was worried about the needle poking through the bag. This holds the lubricant, syringe, and needle, and it fits in the initial bag. Nothing fancy, but it does the job so I'm…
Cap to put on the SSS15 needle of the syringe in this kit: https://www.prusa3d.com/product/lubrication-set/ Use it to store the needle + syringe and lubrication for later. Bore diameter is ~1.85mm.
The Lubi Boy is helping to do the maintenance on the rods of 3D printers (e.g. Ultimaker (S5, S3, 2+), Prusa (MK2, MK3, Mini, Mini+). It is possible to use it to apply lubrication to the rods easily and remove dust or dirt from them.…
A simple diy solution for MQL(Minimum Quantity Lubrication) part cooling for CNC machines. For external hardware you will need: Pressre reducer 4mm PTFE Connectors 4mm PTFE Tube 2mm brass pipe 4mm brass pipe Teflon Tape Corona Test Bottle…
Filament lubrication - silicone oil - no bowden jamming. Universal Filament filter or dust filter (for 1.75mm) The first chamber away from the filament coil serves as a cleaning zone to remove dirt and debris. And the second zone closer…
Adapter für 100g Tuben zum schmieren von LMU8 Lagern, verstärkte Version Adapter for 100g tubes to lubricate LMU8 bearings, reinforced version
I watch Watch restorations as I find them fascinating. I also like all the specialty tools they use. One I've seen several times is a simple little box with two sponges used to lubricate o-rings. Now, you can definitely buy these easy…
Aus 2 bestehenden Modellen habe ich mir ein passendes Teil "gebastelt". Passt auf eine Dose mit ca. 57mm Durchmesser. I “made” a suitable part from 2 existing models. Fits a can with approx. 57mm diameter.
The LM8UU and LM10LUU bearing lubrication adapter is a tool that allows for easy and precise lubrication of these bearings. The LM8UU and LM10LUU bearing lubrication adapter is compatible with CX80 lubricant. It can also be used with…
This model has been adapted for Lucas White Lithium grease 8oz which is pretty common in US hardware stores. It has a cap so you can leave it on the tube and a plug so you can seal those thing up when removed. No supports needed.
I wanted to pack the bearings on my rails from the back through the m3 holes but I had cut the tip to short on the white lithium I had. Figured I'd check printables to see if someone had already made an adapter for the squeeze tubes like…
My treadmill didn't come with any automatic lubrication system so I designed this system. A rubber hose was cut with small holes along one side, clamped to each side of the treadmill band and a funnel was mounted on the side of the band,…
Heres a litte help for all 8mm and 10mm RODs. You need a piece of fleece by 15x30x1mm, for the 10mm ROD Version you need a piece of fleece by 17x30x1mm. I personally use Super Synco Lube PTFE Lubrication for all my Rods ( P1P and Prusa…
Hi, is a simple Tool to Clean and Oil the Rod/Shafts 8 and 10 mm. Addtional Material: Self Adhesive Felt gliders 1,5-2 mm Print Settings: Layer Height - 0.16 Cooling Settings PLA: Cooling Settings PETG:
It's not like I had no filament guide before, it's the third actually. And it has 3 purposes: guiding the filament in a half-circlish path, avoiding sharp bends cleaning/lubricating the filament with a little sponge in a cup fixating the…
This Gridfinity 5x2 organiser is for all the accessories that came with the lube I bought from 3do. This is a 20ml Syringe. Print with low infill to save Material. Feel free to remix to your liking using the f3d file,
Excellent equipment for lubricating the chain of a motorcycle, bicycle, the device is put on a balloon and is directly. The weight of the knee model is about 14 grams, printed without supports.
