1 / 5
Prusa lubricant LM8UU adaptor (Bearing pacifier) — zdjęcie 1
1 / 5

Prusa lubricant LM8UU adaptor (Bearing pacifier)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple tool for lubricating LM8UU bearings.

Ocena
4,946 / 5
Polubienia
730
Pobrania
6703
Wydruki
110
Wyświetlenia
24 583
Oceny
112

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simple tool for lubricating LM8UU bearings.

Print instructions

New version! We found a few things we could improve, so we did, as we always do :-)

Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it counterclockwise until you feel a slight resistance. Then press the tube and watch the tip of the tool for grease leak. Once the grease starts leaking, the bearing is lubricated sufficiently. By my experience one tube is sufficient for two sets of bearings.

Version for Mogul LV 2 EP 100ml tube by Petr Jezek
https://www.thingiverse.com/thing:4401567

New Prusa lubricant LM10LUU adaptor (for MK4)

Also, you can buy me a cofee ;-)

Tagi