Austreiber Kurbelwellenlager KTM 690 - Crankshaft bearing extractor KTM 690
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Falls euch, wie mir, der Lagerring zum austreiben des Kurbelwellenlagers bei der KTM 690 fehlt...
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Falls euch wie mir der Lagerring zum austreiben des Kurbelwellenlagers bei der KTM 690 fehlt. Der Aufsatz verhindert das die Walzen beim ausschlagen aus dem Lager fallen. Mit einem entsprechenden großflächigem Aufsatz kann es nun aus dem Gehäuse geschlagen/gepresst werden.
Das Modell wurde in ASA gedruckt und hielt (für kurze Zeit) dem auf 180 Grad erhitztem Gehäuse stand. Wichtig ist das die ersten 3mm massiv ausgedruckt werden. Der Rest mit 15% Infill.
f, like me, you are missing the bearing ring to drive out the crankshaft bearing on the KTM 690. The attachment prevents the rollers from falling out of the bearing when they are turned out. With a corresponding large-area attachment it can now be knocked/pressed out of the housing.
The model was printed in ASA and withstood (for a short time) the case heated to 180 degrees. It is important that the first 3mm are printed solid. The rest with 15% infill.