Liczymy pasujące modele…
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
See original version for printing suggestions.
Scale it before print ! Category: Keychains
Hello, I installed an Xdure LED headlight mask on my 2006 KTM LC4 640. To keep the original digital speedometer, I needed an adapter. This adapter now allows the mask to be mounted without making any modifications to the motorcycle itself…
I made a tool to push back the pistons of the Brembo caliper much easier. They fit the KTM 950 Super Enduro front- and rear caliper, but probably wil fit other KTM models.
I have a 2016 ktm 300xc and needed a radiator fan. The standard one that uses the Spal 30103018 does not fit on my Emperor radiator braces as it's too big. (https://www.emperorracing.com/product/radiator-frame-1803/) I found a smaller DC…
This is a replacement tail light lens designed for the KTM 640 Adventure (2007) . The model is intended for FDM 3D printing and replicates the original shape while allowing for easy installation. To achieve better light diffusion and…
This is a custom bracket designed to replace the stock headlight on the KTM 640 Adventure (2007) with auxiliary lights from Lada Vesta (WD-024) featuring a cutoff beam pattern. In this setup, the Lada lights are used as the main headlight…
Hello everybody, I was working on my KTM LC8 clutch and i needed a tool. Designed it from one of the clutch plates and the outer clutch hub. I think it needs to be printed in strong material, because the forces are great to losen the…
A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…
Stops the Air Filter Cage from tearing a hole in your Air Filter. For a KTM and Husqvarna enduro bike Years 2017-2020. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 30 Filament: eSun…
Passender Adapter vorn und hinten für Blinker mit M8 Gewinde (Ø 6,8 mm Bohrung)
Diese Adapter verschließen die Endrohre der RS22 Schalldämpfer
Drilled an M3 hole through the base where the pins broke off. The pins have a slot for a square M3 screw. Used M3x18 screws.
Heckspoiler für Carrera KTM X-Bow im Maßstab 1:32 Es wird empfohlen den Spoiler wie auf den Bildern gezeigt zu drucken (Rückseite nach unten auf Druckplatte) damit die Streben möglichst stabil sind. Nach dem Drucken ist etwas Schleifen…
I broke my linkage triangle on my ktm 300xc 2016 at the shock mount where it's very thin and made this for the new one. It snaps on and is held side to side by the shock clevis. It will fit many other years. Shore 70-80D TPU I think is…
A custom key cover designed for the 2021 KTM Duke 390 that fits snugly and protects your key. Painter’s tape was used on both the key and the top part to ensure a tight fit and prevent damage during testing, though the assembly photos…
[PL] Wywaliłeś układ ABS ze swojego KTM 990 Adventure? Po demontażu pompy w schowku zostają dwa otwory. Oryginalne gumowe przepusty bez poprowadzonych przez nie przewodów nie zapewniają już odpowiedniej szczelności. Ten model to…
This 3D model represents a custom mounting bracket designed for use with a soft luggage setup on SW-Motech-style side carriers. The original bag model is unknown, and compatibility with specific bags is not guaranteed . The bracket has…
Quick and dirty remix of @nbss_198530 navi mount for the KTM 890 Adventure for Aoocci C6 Pro. Prototype printed in cheap PETG, with low infill, low perimteter/top/bottom count, still stable enough to not easily break it by hand.
This is a replacement tail light lens designed for the KTM 640 Adventure (2007) . The model is intended for FDM 3D printing and replicates the original shape while allowing for easy installation. To achieve better light diffusion and…
This is a custom bracket designed to replace the stock headlight on the KTM 640 Adventure (2007) with auxiliary lights from Lada Vesta (WD-024) featuring a cutoff beam pattern. In this setup, the Lada lights are used as the main headlight…
added V2 on 26-04-26 Material Prusament PLA (Pineapple Yellow, Galaxy Black) Better Print in PETG Printer Bambu Lab 1XC with AMS Nozzle 0.4mm Slicer Bambu Studio 2.6.0.51 Walls 1or2 x 0.42mm Layerhigh 0.12mm
KTM Type SM - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their respective…
KTM Classic - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx 04/06/2024 added KTM_Classic 2.stl All trademarks, logos and brand names…
I've created this brake duct for KTM SMR / Husqvarna FS to prevent the brake from overheating. It snaps in place and can be secured with safety wire. Model does also fit at least some years of KTM 690 SMC and Husqvarna 701. This has been…
Little enhancement on the Pencil Box of YogiTech . If you like it please do not forget to give him a like too, thanks. Enjoy! Material: PLA Infill: 20% Layer height 0.2mm
A spacer to put inside the rear wheel when using a tire changing tool like the Baja No Pinch tool or something similar.
TomTom Mounting Bracket KTM 990 SMR / SMT (maybe others too) for TomTom Rider 400/450/500/550 series …some screws 'n nuts needed… Handle bar diameter 28mm Show me your makes !!! Yes it's hard to print but unbreakable ....
Designed with a GoPro style mount with passthrough for lights and indicator mounts Print with at least 60% infill
Use this to keep your Garmin Inreach snug as a bug in between your handlebar mounts. A purist might say that the orientation needs to be vertical for the satellite antenna but I like it this way as I can see it and it works just fine.…
I installed HDB handguards on my 2019 690, and it caused interference between the front brake lines and where my speedo was mounted on the Lynx fairing dash. The first part is a bracket (print x2) that bolts onto the HDB handguard bar…
If You want to replace the lamp with a plastron - You need that..
For KTM 890 Adventure riders who face the common annoyance of plants getting wedged between the plastic fender panels during off-road rides, I've created this cover as a potential solution. This design fits the 2023 KTM Adventure R…
A friend of mine is a big KTM fan. For this reason I have designed him for Christmas KTM coasters. Because I wanted to have a flat resting surface for the drink, I have decided on a two-part solution without color change. The lower part I…
This is the S version with 5mm offset holes to center the Thorkracing T665 DMD device when using the metal locking mount
Falls euch wie mir der Lagerring zum austreiben des Kurbelwellenlagers bei der KTM 690 fehlt. Der Aufsatz verhindert das die Walzen beim ausschlagen aus dem Lager fallen. Mit einem entsprechenden großflächigem Aufsatz kann es nun aus dem…
KTM Multicolor Keytag – Ready to Race! Elevate your style with this KTM-inspired keytag! Featuring the bold KTM logo on one side and the iconic "READY TO RACE" slogan on the other, this is the perfect accessory for any KTM enthusiast. Key…
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG. Stützen eingeschaltet, Perimeter auf 8 Der Befestigungsriegel ermöglicht eine Befestigung des Halters weiter unten im Rahmen und verhindert mit dem Noppen das die 0,5-Liter-Flasche…
Hour Meter mount for KTM, Husqvarna, GasGas, Sherco Replaces the speedometer. Original made for my Sherco SE should also fit for KTM and others. I print with PETG and 100% infill for max. stability. Lasts now more than 30 hours.
for KTM and other brands from KTM-Group to cover the steering lock to protect from dust, water and impact and damage use TPU for the part and it will keep in place properly
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG Die Schrift ist etwas erhöht, sodass ein Farbwechsel möglich ist
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
A remix of the well known Maker World Clock for all KTM DUKE fans. If you need to buy the clock part on the net just make sure it has a thread length of 13mm. Want more clock designs? Have a look into our DECORATION collection . [UPDATE]:…
This is in case you lose caps for the air ducts when doing maintenance to your motorcycle. This is the kit https://ktmtwins.com/products/ktm-air-filter-kit-790-890-adv-r-2019 but I haven't been able to find a place where this parts can be…
This is a fork seal driving tool for use with 43mm diameter dirt bike forks. This was designed with WP dual chamber forks in mind, but will service numerous other fork types from KTM/Husky/GasGas. There are two lips designed into the seal…
If you've added a side stand sensor bypass but have still left the original side stand switch attached, here is a cover for the plug so it doesn't fill with mud. Fits: US Model 2017-2024 Husqvarna 701 - Enduro & SMC & Vitpilen EU Model…
KTM Powerparts Set 2.0 * It is recommended to print these parts using PETG for its excellent durability and strength * I can modify any model in this set — whether you want your own logo added or specific adjustments — for an additional…
Ktmp1 tiene una tolerancia de 0.15mm, los pernos encajan perfecto, puedes ponerle pegamento para que no se suelten, ktmsupv1 tiene una tolerancia de 0.25mm, puedes escalarlo para que entre perfectamente en ktmp1.
I designed GP wings for the KTM SuperDuke 1290R 2021. Very easy installation: I recommend printing from PA12 or PC Blend Carbon Fiber
This is frame plug for KTM Superduke 1290 R GEN 3.0. I recommend print in PETG. You will also need a 3 pieces 22 x 2 mm O-ring for a perfect fit.
This is frame plug for KTM Superduke 1290 R GEN 3.0. I recommend print in PETG. You will also need a 3 pieces O-ring 22 x 2 m for perfect fit.
https://www.ktm-online-shop.de/product/ktm-usb-ladebuchsenkit/?id=37726&gad_source=5&gclid=EAIaIQobChMIrurY6-HFiwMVuU2RBR0A2CdLEAQYAiABEgJJvfD_BwE
KTM 1290 Super Adventure R (SADV-R) front radar sensor (not installed on R version) hole delete
An extended headlight knob for many KTM dirt bikes. Will need to be tapped M4 x .7 Was modeled off a 2016 KTM 200 xcw. This model placed the knob portion slightly above the speedo unit so it can be grabbed easily with gloves. There is a…
KTM 890 Adventure has annoying issue. The hole in the rear mud flap does not make sense and just lets mud spray through and cover the rear light. This reduces safety even after light off road riding. it definitely needs to be covered. so,…
Hello everybody, I was working on my KTM LC8 clutch and i needed a tool. Designed it from one of the clutch plates and the outer clutch hub. I think it needs to be printed in strong material, because the forces are great to losen the…
Illuminate your space with the powerful KTM logo lightbox, a must-have for fans of this iconic motorsport brand. Whether you're a KTM enthusiast or simply love bold, striking designs, this lightbox will add an energetic and stylish touch…
Oil drain pipe for doing oil changes in KTM, Husqvarna or Gas Gas motorcycles (or anything with a M12 x 1.5mm oil drain bolt thread). To use, lay bike on side, remove drain plug, screw in drain pipe (I put a plug in the end of the pipe),…
Aesthetic front wheel slider KTM 1290 SDR. Can be used with 2 m6x60 bolts and washers, or a m10 rod with washers and nuts. (See drawing) Print the Slider cap 2 times and use a color change if you like. Be aware that it's designed to look…
I used it for my Jansite Apple CarPlay display I got from AliExpress, but as far as I know it is the same harware as the Carpuride w702 so it should also work for that model. Features: display cant rotate on the mount no drilling or other…
70% PETG Knurled inserts (double twill) 4x M4 X D6.5 X L8.0 for the AMPS M5 X D8.0 X L6.0 for the OE screws There's a blank there from factory, you should use the OE screws into the M5 knurled inserts. I had mine on for many thousands of…
Please read this description carefully and understand it, before continuing. Disclaimer: You are responsible for the safety of your bike. If you don’t know what you are doing, stick to the original parts. Hi, this is a fusion of the…
Just a simple wall mount for my KTM 1920 Touring Cases. keeps them off the floor and now i can back my truck into the garage next to my bike
Used GritShift MX stem, might be clearance issues for others. Number plate mount attaches to fork with zip ties.
I designed a Motorcycle Box inspered by KTM 300 EXC 2024 where you can put small stuff inside as a gift or to keep for yourself. Make sure to fit the size to your needs in your slicer since I drew it pretty small. Also make sure the Top…
Any print settings will work, however to get the best details and print quality use a 0.25mm nozzle, but a 0.4mm nozzle would also work. Change the x and y axis percentage to adjust the size of the KTM keychain to your preference!
Adapter for generic Puig tail light for my KTM Duke 690 tail tidy, might work on other plate holders. Instructions Pass the tail light cable through the hole, from the flat face to the one with the protrusions. Screw the tail light in…
I printed the lever and adjuster in both PLA and PETG using the built in profiles in PrusaSlicer but with 50% infill. Both levers have worked well for test rides. I plan to do some trail riding to see how the lever holds up, but so far…
A redesign of the OEM Part 48600698 adapted for 3d printing. I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase…
Print, prime, sand and color in the text My recommendation color in the text with a lacquer based paint I also recommend ironing when printing see picture Topographic backside Swedish mountains
License plate holder for the KTM Duke 790. This design uses the stock tail light and aftermarket 10mm turn signals. Most 3rd party tidy tails use a non standard tail light and many of them are bad. I decided to design my own tidy tail…
I modified the original author's bar to flip the ends 180 degrees to better fit the KTM 1290 SA's mount points.
Adapter to fit aftermarket license plate light onto a 2007 KTM SM Prestige. Original was falling apart from its age. Adapter piece follows original light shape and fits into its original mounts. 2 additional holes for M3x10 bolts need to…
Simple and sturdy license plate holder I designed for plates measuring 13.2 cm x 23.9 cm only. Printed in PETG with 40% infill and 0.2 mm layer height for durability and flexibility. Perfect fit – no supports needed.
I have designed an engine protection cover to prevent scratches from boots. The installation doesn’t require any bolts and is easily removable. The assembly requires 3 magnets: one 15 mm in diameter and two 10 mm magnets, though it can…
KTM 990 SM-T Keychain Change color at z=1.0mm Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25% Filament: Sunlu PLA black, orange Category: Automotive
This custom 3D-printed support is designed to perfectly fit a KTM motorcycle front mask and securely hold the universal 3-inch LED fog light, such as the one available here on Amazon . ⚡ Key features: Tailor-made to fit KTM front masks,…
KTM 990 950 LC8 SAS block off plate. -Print out of PPA-CF or PPS-CF. -crimp close the OEM reed valve in the engine before installing.
