1 / 7
KTM SMR / SMC / Husqvarna FS / 701 Brake cooling duct — zdjęcie 1
1 / 7

KTM SMR / SMC / Husqvarna FS / 701 Brake cooling duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Brake duct for standard SMR/FS supermoto front brake

Ocena
5 / 5
Polubienia
14
Wydruki
0
Wyświetlenia
1797
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Standard Digital File License

I've created this brake duct for KTM SMR / Husqvarna FS to prevent the brake from overheating. It snaps in place and can be secured with safety wire. Model does also fit at least some years of KTM 690 SMC and Husqvarna 701. This has been tested, but please compare your fork lugs with the pictures.

I've printed it in PETG-CF with 50% fill, but it will probably hold just fine with less fill. 

Update 20-3-2025: changed to model slightly to be able to print the part with the mounting side on the bed, which reduced printing time from around 16 hours to 9. I've reduced the fill from 50% to 15% as tests indicated, this will hold just fine. Support is only required on the bridge at the air outlet.

Tagi