Print in Place 6200 Ball Bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 6200 ball bearing that prints as one piece.
- Ocena
- 4,778 / 5
- Polubienia
- 1149
- Pobrania
- 5441
- Wydruki
- 31
- Wyświetlenia
- 17 762
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Try the new, EXTRA printable version of this model! - https://www.printables.com/model/1289272-extra-printable-print-in-place-6200-ball-bearing - Improved in just about every way and highly recommended over this one!
I found myself in need of a 6200 series bearing but only had a bunch of 608s on hand, so I thought I'd print one up and see if it worked - it did!
Print this on its side and with support enabled. I recommend normal (rectilinear) support rather than tree style support, you will also want to turn support distance to object down to 0.1mm as a normal 0.2mm separation distance led to balls popping off mid-print for me.
This model is dimensionally accurate to the 6200 series of bearings but is, of course, going to have a lot more slop in it than a real bearing would. This worked for me in the Bambu filament transfer setup I needed it for and may work for you but is probably a poor choice where bearing slop is going to be a problem for you.