3,940 models
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I couldn't find a yoyo model for a standard 608 ball bearing, that's why I created my own. I designed it with the specs of commercial unresponsive yoyos in mind: 55mm diameter 36-38mm width 54-60g weight Turned out that the yoyo can not…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
A perfectly designed gear bearing that is made to have minimal friction and is easy to 3D print it can also spin for up to 7 seconds! It's quick to print coming in at under 2 hours. This print also is beginner friendly and has a big…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Print approx. €6.12–€7.48 excl. taxPreliminary estimate for one variant
Print in place bearings DIN 625 A oopening is added to insert lubricant TESTED !!! IF YOU NEED OTHER DIMENSIONS? JUST LEAVE A COMMENT
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for PETGSource material: PET
This is my remix of Linear Bearing Greasing Cap by walter to fit on small 12g tube of Super Lube. It is only for LM8UU (8mm) bearings. You have to cut off the tip of the tube just above the thread like I did (check pictures). I have…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
50x20x10 Roller Bearing with roller cage The roller geometry allows it to be loaded axially to a certain level. Tolerances between the rings and the roller is available in 0.15 mm and 0.1 mm. Printing: Print orientation: print it on the…
Print approx. €1.17–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
A spool holder for filament-spools on a flat surface. It is designed to only use one file. BOM (for two holders / one spool): 4x 608ZZ bearing 4x M3 screw 12mm 4x M3 nut
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
Y Axis remake for use with bearing mount All parts are based on original Prusa i3 MK2 design. Print instructions y idler requires support. y corners have support build into design. BOM: 4x LM8UU M3 nuts and bolts
Print approx. €8.62–€10.54 excl. taxPreliminary estimate for PETGSource material: PET
***german version below*** I really liked the versatility and simplicity of the original spool holder design od the Prusa Lack enclosure. But it had two disadvantages. It was quite noisy and it streched flex filament quite heavily while…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
6200 Ball Bearing Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Após algumas pesquisas decidi-me por fazer a minha própria peça. O ficheiro STL já tem a tolerância de 0,2 para ficar com o diâmetro interno de 8mm e externo de 15mm. Basta fazer o slicing com as definições a baixo e deve sair tal como a…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Changes: The longer "neck" gives more surface to grip on Sturdier body, to give more strength Description: Tried the original one, was working already good Saw a video where there was a piece of paper attached to the printer to…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…
Print approx. €7.68–€9.39 excl. taxPreliminary estimate for PETGSource material: PET
!! Attention: See the new upgraded model here ! !! While the original print-in-place bearing is fantastic and works very well, the nature of the print-in-place arrangement means that the underside of the top part ends up a little messy.…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
Creality Ender 3 S1 Pro/Plus Filament holder adapter 2-3kg bearings or use without bearings (cylinder name “tubus 2-3kg use without bearings” ) It is designed so that the coil easily unwinds from the holder and does not tend to get stuck.…
Print approx. €9.53–€11.65 excl. taxPreliminary estimate for PETGSource material: PET
These are fun fidget toys that I made to practice revolution in onshape and to test printing in place. There are two variants of it one with spikes and one without any. You will need supports to keep the balls suspended in the air to make…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
The mount holes are for original 18mm, bars. Needs: Print 2 x walls by spool Buy 4 x ball bearings 608 Reuse 2 screws M3x10 (Warning: this is not a bone for dogs ;-) )
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
This allows you to save your steel bearings for a project that needs them. Printed roller bearings are sufficient for this light duty task. Print instructions Replacement bearings for print 2622 auto-rewind-spool-holder-for-mmu by Martin…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
This filament spool holder is designed specifically for the Prusa MINI and mounts directly on top of the Z tower. It uses a fixed axle that runs through the center of the spool, preventing the common issue of spools falling off the stock…
Print approx. €5.97–€7.30 excl. taxPreliminary estimate for one variant
The 5K Bearing Spool Holder seemed like the quickest solution that fit my environment. However, the spool was free to spin and quickly created a tangled mess. I looked for any solution that would address ‘the spin’ but couldn't find…
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET
Parts: 1x M12x330mm Gewindestange (Zweierpack für 2,99€) 2x M12 Muttern (Viererpack 1,49€) 2x Korrosseriescheibe 13x37mm (2 = 0,47€) 2x Karrosseriescheibe 17x50mm (2 = 1,49€) Gesamt: 6,76€ The diy-steuersatz-werkzeug (Headset Bearing Cup…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
it is specially designed to hold the filament spool securely in place while allowing it to rotate freely as the printer operates. it typically features bearings to reduce friction and ensure smooth filament feeding during printing and…
Print approx. €6.04–€7.38 excl. taxPreliminary estimate for one variant
Remixed "bearing holders" for the Spool holder for Prusa MINI Flexible by Madaco to fit Bones Reds bearings with a 7mm inner diameter. (the kind you get in the 16 pack). You certainly don't need skateboard bearings for this project, but…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
This allows you to store one sleeve of 608 bearings. Easy to pick out. stackable. Print from any material.
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
This is an upgrade to the original filament guide that comes with the Ender 3 Pro, designed to enhance the smoothness of filament feeding. The model uses two ball bearings to ensure that the filament spool rotates with minimal friction,…
Print approx. €7.47–€9.13 excl. taxPreliminary estimate for one variant
I am currently trying to convert my Ender 3 to a linear rod system instead of the radial bearing system it uses. In doing so, I ran into a few mounting hurdles for the bearings as I am using Alu rods (for the time being). Thus,…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
I was curious if a fidget would have less friction without the bearings (as provided by a previous design). This design simply uses a v shape to keep the inner and ourter races together. It seems to have lower friction than the bearing…
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for one variant
In my search for a Gridfinity solution to organize my 608 bearings, I discovered one that meets my needs. However, I've faced a problem where PrusaSlicer begins printing the screw holes suspended in the air. To remedy this, I've added…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
6200 Ball Bearing with HEART! Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Simple design easy print Extra parts needed bearing and m5 screw Pause close to the top and insert the bearing. You will not be able to insert it later. Print files for MK4 attached.
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
Print in place small bearing set: https://www.printables.com/model/542689-print-in-place-small-bearings Print in place BALL bearing set: https://www.printables.com/cs/model/583731-print-in-place-ball-bearings Thanks, 3Dprintsmith for his…
This is a Gear Bearing with powerful performance. This bearing has perfect tolerance and rotational performance (about 6 seconds of rotation). And unlike other gear bearings, it takes almost half the time to print. It's even easier to…
Print in Place Bearings with real rolling elements. ! ATTENTION ! - these models are hard to print and fail easily. - your printer MUST be able to print gaps of 0,1mm width - clean your printbed - make sure, great adhesion is possible -…
This is not an easy print. Your printer MUST be dialed in well. If you aren’t sure about your printers tolerance abilities, print this first- https://www.prusaprinters.org/prints/127569-s-shaped-tolerance-test-01-04mm-in-002mm-increment…
Quick tips for successful print: Use 3Dlac, glue stick, or Magigoo for better adhesion. ..or simply clean the bed with isopropyl Reduce flow rate to .95 If you are experiencing difficulty with bearing rotation, don't worry it should…
Dust cover for Z axis bearings. Prevention is better than cure.
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
This is a very simple, very fast to print bearing made of three interlocking rings which print in place. You can use it as a drop-in replacement for ordinary skateboard bearings, but because it relies on sliding rather than rolling…
Versions: V2, 10/18/2022: Fixed inner diameter to match 608 specification. Added extreme tolerances for perfectionists. Unfortunately, "Bearing.stl" is something you can't just download and print. Most of the time it won't work properly…
This is a simple dual-bearing spool holder for the Elegoo Centauri and Centauri Carbon. Required hardware 608 bearing, x2 I strongly recommend using greased bearings. The grease provides some resistance which helps to slow down the spool…
Filament Spool Roller w/ 608 bearings - Snapped together and no bolts - Linear Alignment Rail Remix of https://www.thingiverse.com/thing:2185015 EDIT-8/11: Tolerances of Rail have been adjusted. Tested with a layer height of 0.15mm…
Try the new, EXTRA printable version of this model! - https://www.printables.com/model/1289272-extra-printable-print-in-place-6200-ball-bearing - Improved in just about every way and highly recommended over this one! I found myself in…
If the bearings are stuck, try using a small flathead screwdriver to free the balls. Occasionally, the tight tolerances can cause the small components to stick together. Happy Printing :)
This 608 bearing is fully printable, robust, reliable, somewhat dust/dirtproof and easy to assemble. Since filament has a tight tolleranced outer diameter, it makes for the perfect roller in this bearing. Even if your printer has its…
Printed bearing with no balls or assembly, easy to print with no supports. I saw another one like this on Thingiverse but the curve was the other way around which made me feel like it would be less stable. Print Settings Rafts: No…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Winder Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher…
My completely redrawn improved bearings. They were inspired by guppik from Thingiverse. They have improvements for easier printing and a new body structure. Print in place bearing set with bigger bearings:…
Printed on Prusa Mini+ Nozzle 0.4, PLA 0.07 ultradetail mode (0.1-0.12 should works too) Please set the flow for 90% Print it slow! 20-25mm maximum is recommended. Dimensions: 8x22x7mm You like it? You can buy me a coffee 😉…
Additional Hardware None. Great care was taken to make this model fully printable without any fasteners or glue. Print Settings Use your favourite print profile with a 0.4mm nozzle. For all parts, set the ‘ Seam position ’ to ‘Random’, to…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher &…
This is a practical, printed 608 Bearing suitable for many DIY projects (for example in a spool holder). It is a fully functional roller bearing with a proper working cage. It runs like a real bearing with a smooth action, tight fit & low…
NEW VERSION!!: https://www.printables.com/model/803435-new-bearing-less-ps4-controller-mini-wheel Based off of these two models: https://www.thingiverse.com/thing:4498704 https://www.thingiverse.com/thing:3062713 Print screw at 100%…
Please see original post on GitHub for thorough description, manual and instructions. Geometrically this is the same as the original and the gauge/meter will read just as the first one. Additional BOM: 4- M3x10x4mm bearings (623-2RS), no…
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
Download different models based on your 3D printer's tolerances. My printer starts spinning 0.2 when all the parts are properly separated. If rings are really stuck, take a small screw driver to separate them carefully. You might need to…
Video of the finished bearing on Instagram: https://www.instagram.com/p/BPA0LYlDdlO/ I wanted to create my own ball bearings for my filament rolls, and have experimented with the details. The outcome is this design, which is ready to…
A small modification of the bearing-less mini wheel by mrplasma ( https://www.thingiverse.com/thing:4498704 ) which is based on the pixel2 design ( https://www.thingiverse.com/thing:3049220 ). Details I noticed that in the original design…
Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…
You can use the PET Bottle Cutter to cut sprips from the PET bottles with selected width. The PET strip can be then used in machine which converts it to filament for 3D printers. This cutter is using sharpened bearings, they works like…
Here is the next Design from my "Open Drawer" Series. It is a full lenght drawer guide, that does not need any bearings! This Drawer Guide (in Germany its called Vollauszug btw.) uses the smooth surface of the PLA to run smoothly, so you…
A refinement of Emmett Lalish's excellent Gear Bearing -- now with chamfered edges, a smoother outer surface, and dimples for your fingers to hold. Internal geometry and clearances/tolerances remain unchanged. Prints great in PLA, PETG,…
Generate working or placeholder bearings of any diameter. Use OpenSCAD to generate any size bearing. (Imported from Thingiverse. Originally published: 26 Aug 2016) Print Settings Rafts: No Supports: Depends
The bearings are composed of three interlocking rings that can slide past each other to reduce friction. Printable bearings are great for prototyping because they are lightweight and easy to work with. Quick tips for successful print: Use…
This is 100% print in place figet spinner. It does not request any equipment or NO - 3D printed parts.
Printed with 0.2mm layer height.
This is a basic, functional roller bearing designed for various 3D printing applications. It can be used in DIY machines, mechanical prototypes, or educational builds. The design allows smooth rotation and is printable without support on…
Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…
!!! Important !!! : Be careful if you take the bed to the bottom as the bed will skip teeth in the belt because the bed hits the bearing covers. If you want to use this mod you have to change the Printable height parameter in the slicer…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 New version of the Z-axis top with additional ball bearing for more stable guidance of the trapezoidal spindle. I don't know if you really need it…
Different Bearings. Let me know if you need one i have'nt made yet. The value behind the “_” ist the spacing.
I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…
All the bearings use the standard 6mm Airsoft BBs. Ranging from 20mm, up to 200 mm (outer diameter), in 2 and 5 millimeter steps, and are 7.1mm thick . I don't even know what you could do with a 200mm bearing, but if you do, send us a…
Small 24 mm Ball Bearing. MMU Prints are Possible.
For 2 years, I have had the model "Sunflower Windmill" uploaded. It was showered with likes and won first place in the Floral Design Contest. Back then, I already provided a simple mod for 608 ball bearings for my Patreon members. Now I…
Another 608zz bearing that works for my personal use when i am out of metal ones PLA stl have bigger tolerance and i print it in PLA ABS stl have lower tolerance and is printed in ABS Printed on Bambu P1S 0.2mm layer, 3 walls, 15% infill
This is a follow-up to my earlier posting of Lazy Susan mechanisms. I had a few comments about conical bearings and decided let's see if it is better and how much better. So here it is... Video at... https://youtu.be/1lg1n2SvySI More…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
This is a roller bearing style spool holder that replaces the oem spool holder, in the same location as stock. it will accommodate standard size spools up the 75mm wide with a 40mm or bigger hole diameter. The roller and the body each…
I wanted to improve the plastic input to my extruder, because just with the original spool holder from prusa the spool wobbles a little bit due to the friction between spool and holder. After a quick search found thousands of ideas, most…
I downloaded and printed many 608 bearings. None of them satisfied me. Half printed balls were flying around in my printer or the bearing had too much play or other problems. So, after a lot of experimenting, drawing, test printing and…
Based on the Gridfinity organization system by Zach Freedman
Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…
The Prusa Roller is the name of a new filament unwinding tool which fits all common filament rolls. It has been designed so that the extruder has to overcome as little rolling resistance as possible. My motivation for designing the Prusa…
Hello, I've designed and made this bearing. It works i pretty good:) I've made various designs but this one works the best for me now. I use 4 of these on my spoolholder for a smoother feeding to my extruder. **Fixed the issue that the…
Thanks to inks007 for this well made design (Thingyverse thing:2969556). I used it for with Igus drylin RJ4JP-01-08 bearings. And it works very well so far. I upgraded the x- and y-axis with RJ4JP bearings and it's super quiet now,…
Introduction: This 608 roller bearing features a half cage print-in-place design optimized for 3D printing. The rollers have a dynamically changing cross-section, allowing both radial and axial load capabilities. Its unique half-cage…
Heyho Here I have a simple and oldshool 608 bearing alternative 4 you :) 2 Design options: Smooth & Toothed. 2 Tolerance options: 0,2 mm and 0,15 mm. Printing “advice” Set Seam to “random”. If you can print multimaterial (Prusa XL, ..)…
This is a crank driven manual (non electric) WDT tool. It helps get rid of clumps in your coffee basket and evenly distribute coffee before pulling a shot. 3D printing settings: My tool was printed with ABS+ @ 0.4 nozzle, .2 layer height.…
This dust cover is designed for the Z-axis bearing on the Flashforge AD5M (Adventurer 5M). It may also be compatible with the AD5M Pro, but I don’t have that printer to verify - your feedback is welcome. Based on feedback from other…
I designed this spool holder to hold a spool with 32mm inner diameter or bigger, and with 70mm width max. It is base on 2020 Spool Holder but this time works for a Ender 3 V3 SE spool holder I've been using it for a while and is stands…
Update (27 March 2025) - Uploaded a new thread only (no sides) universal spool holder axel at a user's request. This allows you to use two female ends and adjust to any size needed. See the "Drybox Axel - 50mm Universal Threaded (Male,…
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
Completely functional bearing which operates best in a vertical orientation without to much sheer force. Outer diameter: 17.69mm Inner diameter: 5.16mm The inner diameter is keyed to prevent the inner ring from spinning around the axle.…
This is an improved filament spool holder for the Anycubic Vyper or Creality CR-6 SE. It fits and locks with the original spool arm provided by Anycubic or Creality. Parts required 2x 608ZZ bearing 1x Spool Holder v21 (0.2mm layer height)…
This is it, this is what I have been focusing on for the last month. the system is done, I am not making anymore adjustments at all. There will be more mounts there will be more options but tis is the base system in its glory. Hi I'm…
