1 / 6
Ball Bearing Fidget with spikes and without — image 1
1 / 6

Ball Bearing Fidget with spikes and without

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This are just large ball bearing fidgets that are fun to spin, there are 2 versions, one with spikes and one without.

Rating
0 / 5
Likes
9
Downloads
55
Makes
0
Views
221
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

These are fun fidget toys that I made to practice revolution in onshape and to test printing in place.

There are two variants of it one with spikes and one without any. 

You will need supports to keep the balls suspended in the air to make sure they don't stick to the inner and outer rings.

Paint on the supports on each ball and spike to have accurate easy to remove supports.

I used organic supports as I find the are better and easier to remove. I added my support settings to the to pictures.

I printed these models both on bambu p1p and ender 5. 

On bambu p1p the print takes approximately 1h 15min, on ender it takes close to 3 hours. 

 

Tags