Ball Bearing Fidget with spikes and without
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This are just large ball bearing fidgets that are fun to spin, there are 2 versions, one with spikes and one without.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
These are fun fidget toys that I made to practice revolution in onshape and to test printing in place.
There are two variants of it one with spikes and one without any.
You will need supports to keep the balls suspended in the air to make sure they don't stick to the inner and outer rings.
Paint on the supports on each ball and spike to have accurate easy to remove supports.
I used organic supports as I find the are better and easier to remove. I added my support settings to the to pictures.
I printed these models both on bambu p1p and ender 5.
On bambu p1p the print takes approximately 1h 15min, on ender it takes close to 3 hours.