1 / 7
BallBearing spool holder for (Un)orginal Prusa Drybox — image 1
1 / 7

BallBearing spool holder for (Un)orginal Prusa Drybox

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ball Bearing Spool Holder - less friction, more fun.

Rating
4.87 / 5
Likes
110
Downloads
614
Makes
26
Views
2,077
Reviews
23

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand..
So here is my mod: ball bearing spool holder for (un)Orginal Prusa Drybox.

The mount holes are for original, 18mm, bars.
There is a version for 20mm bars - "WALL_beam_20mm.stl

PRINT:
For one spool you need to print 4x PIN.stl, and 4x WALL.stl 
(Total for 5 spools: 20 pins, 20 walls)


BUY:
For one spool you need 4x ball bearings 608, 
(Total for 5 spools: 20 bearings)

Any 608 will work (608, 608z, 608zz, 608rs …).

For best experience, add this one too: https://www.printables.com/model/624410-ptfe-converter-6-to-5-spools-for-unorginal-prusa-d

 

 

 

V2: Added second version after battle-testing this model

v2 is more sturdy, distance between bearings is bigger, so the spool sits better “in the saddle”, this fixes the issue with very lightweight spools with not much filament left, that sometimes were pulled out of berings when nearing end of spool. Also the hole for steel bar is bigger, from 18.30mm to 18.50mm

 

On my V2 prints you can see embedded numbers for spools, this makes it easier to see which holders relate to which spool, thats usefull when you take out everything from inside of dry-box, and you start to re-fill whoole box. Thoose are made with “add negative part→ text” in slicer, example one is available as .3mf

 

 

PS: There exist a remix, that uses m3 screws to secure parts, you can use that if you're paranoid ;)