Windmill - 100% printable - no support - no bearings - low friction - video
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.14 – €0.18 net (excluding VAT)
For file: Windmill_Screw_Bar_0.4n_0.2mm_PETG_MINIIS_13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Complete printable windmill which is easy to assemble and expandable with other parts.
- Rating
- 4.859 / 5
- Likes
- 2,900
- Downloads
- 7,605
- Makes
- 116
- Views
- 56,231
- Reviews
- 99
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Windmill - 100% printable - no support - no bearings - low friction - video
Complete printable windmill which is easy to assemble and expandable with other parts.
You need a screwdriver for assembling?
Dimensions
- Length 127 mm
- Diameter 160 mm
Settings Body & Fin & Bar:
- 2 perimeter
- 0,2 layer hight
- 15 % infill
- no support
Settings Rotor:
- 3 perimeter
- 0,2 layer hight
- no infill
- no support
Settings Screws:
- 2 perimeter
- 0,2 layer hight
- 15 % infill
- massive infill thread area
- no support
Model printed with:
Expandable Parts:
You can use some parts for other garden spinners.
