Counting matching models…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Handles for Skånska Byggvaror Outdoor parts Intended to sit on the inside of lot with fitted outside original handle. With the handle, you get a grip to push the part from the inside. The handle does not prevent the parts from being…
A funnel for an Odin Sidewinder speedloader for making the refilling of the speedloader less of a hassle and less risk of spilling BB's everywhere. This has been designed to sit in the opening of the refill hole with a friction fit and…
Mirror anti wind buffeting covers panels for Supra mkV. Printed with fuzzy texturing with low infill (10-15%) and using 3M double sided foam adhesive to install. Very easy to print. The file can be duplicated and flipped in the slicing…
I would recommend ABS or ASA, as the part is exposed to direct sunlight and therefore heat. layerheight: 0.2mm infill: 20% (gyroid) wall loops: 4 top shell layers: 5 (cause we need a little bit extra material for sanding)
I introduce to you window curtains "waves" maker, they main task is to make curtains fold perfectly every time, but they also make the curtains slide smoothly on their pipe (smoother than using toilet paper rolls only). They are designed…
Depending on your windows and printing tolerances, you may print in ASA or PETG if the holder fits snugly. I printed in TPU with the flexible wing version and they fit securely, without any glue, and are easy to remove.
Dies ist ein kleines, stabiles und coqoles Windspiel was ich selber gemacht habe.
[English] I've tried various buffers and auto rewinders for MMU2S, and I finally found something satisfactory. That name is “Stronger Compact Spool Auto-Rewinder by rans”. It is great that it rewinds moderately, even if there is a lot of…
The DXF/PDF file serves as a template for cutting out the body from wood. In my case, 20 mm thick. The DXF file is intended for a CNC milling machine. I built one myself. The mounting holes (4 of them) are arranged so that you can mill…
Simple and ergonomic fishing line winder for a better calculation tackle length of winder is 25 cm
Decorative windscreen-mounted holders for tax and insurance discs. I got tired of the terrible ugly standard vinyl holders, so made something a little nicer. These accommodate the standard (Ireland/UK) tax disc which is 75mm round, and…
Printed in Devil Design PET-G on a Voron Switchwire (converted Ender 3 Pro) at 0.2mm layer height, 15% cubic infill.
Printed in ABS. I used super glue to mount it, but other glues might be better suited.
I needed to make a waterproof box for my M5 TimerCamera F. The Inside dimensions of the box are 99mm to fit the M5 TimerCAM with tailbat module connected, but feel free to resize it to your needs. I will be printing a small version (60%…
Pretty basic model. I made the base thick so it would fit nicely in my window and have a little weight so the duct wouldn't keep pulling it out.
Changed the windshield rim/frame, bottom side is 3mm wider and top side is original width or change as you like (provided step file).
Window ventilation hole cover. Designed for original Vekra windows. Printed from PETG, but as it is designed for outdoor, ASA would be better.
Extended rims to hold cords as long as possible on a square bed. Also added indents so it stays straight while hanging.
I normally publish and update all my models at MakerWorld. They are only here on Printables to keep the accounts consistent. Please download the newest version here at MakerWorld. The box has a depth of 40mm which should be enough for…
Hin und wieder sind Gewindebohrer zu kurz um eine schwer zugängliche Stelle zu erreichen. Hier hilft dann eine kleine Verlängerung, die ich für M3 und M4 Gewinde erstellt habe. Sometimes taps are too short to reach a hard-to-reach place.…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Mounts (and hides) a battery case to the top of the window.…
I needed to replace a broken handle on an old wooden window. I figure that it's faster to just design it and print it out than try to find a replacement. It worked out!
I wanted a music box piano that was also a piggy bank! I remixed the v3 hand crank piano to use a different wind up style of music box, and added a slot for money.
Cover for holes in door/ window plastic frame. I used Nano Tape Double Sided Tape to glue it.
Simple bird feeder for the window. The model has a hole for a glass suction cup. I used a suction cup with a М5 threaded rod.
Glue the head to the neck. To connect the propellers connect with a filament string. The arresting hole for the stand may need to be drilled to allow the filament string to pass through.
I designed a holder for a foam edge protector. I didn't want to stick the edge protector to the windowsill, so I designed a clamp closure. With a practical shelf for a TonieBox. Suitable edge protection can be purchased here:…
Variation on a window shelf that fits my vinyl windows inside. it just presses over the inside flange and holds 15mm via
I printed the original model for my Atillery Sidewinder X4 Pro. After a while the screw came loose and sensor rotated downwards which made the filament move less smooth than before. So I made this remix based on @waintdeir's model,…
The clutch was a bit redesigned (less sharp edges) and print settings was optimized in order to reduce efforts to insert blinds beads. Print parameters: 0.16mm layer height, 2 wall, 15% rectilinear infill It was printed in PETG (to…
!! This is only an axle part. because I remixed two projects that have incompatible licenses I can't publish them in one model. Get the axle here To make your drybox convertible to use 2kg spools take a look at my other model: Here you…
Halterung für Standard Gewinderatschen und Windeisen Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 1x 3D-Print "S37x9…
The Rogue Echo Bike rushes a lot of wind in your face. The Wind Guard redirects the wind blast, making the workout even better. Included are low, medium and tall profile designs. Choose the lower profile model, to get a slight breeze by…
These protectors are designed for the two cellar shots on Whirlwind pinball. On my game these were pretty worn, so these will both protect the game from further wear as well as make the shots closer to the original tolerance. They fit…
In response to the increasing number of flower pots in my daughter's room, I created a flower wall to be placed in the window. I was looking for a solution that would shade the window as little as possible. To make it, I used two 120 x 20…
This is a model that uses the flexibility of the plastic to fold over and hook to the smaller plate. It will work with 73-87 chevy trucks, and it may work with other makes and models, but I have not tested those.
This remix adds an autorewind spoolholder INSIDE the standalone Drybox. You can then throw away the buffer that comes with the Prusa MMu module. I wanted the original “standalone Drybox with humidity sensor" to support a parametric…
This is my version of a hinged holder for the Aqara door and window sensor to be mounted on a garage door. It uses a piece of 1.75mm filament as hinge pin. I made the clearances fairly large to ensure easy swing since the magnet is quite…
This is a remix of a Spinning Turok 2 Razorwind . I modified it so it can be printed in separate pieces that does require any multi-color support on your printer. I also split the main hub into two pieces so you don't need a raft or a lot…
A 5 and 6 inch version of a Tenkara Line Winder featuring hook holes with a backer to keep hooks away from your furled leader lines. Fits the Dragontail Shadowfire 365 rod. Printed on back (hook holder holes down on printer bed) with…
Imagine you have a magnetic holder for your cell-phone in your car. Normally these use a thin ferromagnetic plate, which should be glued to the backside of your phone. But what should you do, if your phone supports inductive charging,…
This part replaces the original one. Two parts click into each others. Fell free to improve my design. Printer: Bambu Lab A1 Infill: 15% Filament: Aurapol PLA White
This cute Easter Bunny can be used as decoration for walls, windows or glass doors. 2 variations are included (with or without hanger) to give you more options when mounting. It’s easy and fast to print. It’s fully scalable without loss…
This fabulous chicken can be stuck to your car window. Go down to make it jump, and vice versa!
E N G L I S H My Artillery X3 Plus had a crooked print head, which caused the prints to tear off at high speeds. You can't use a standard measuring angle, so I designed a small angle. While I was at it, I thought it would be a nice idea…
G E R M A N Türgriffverlängerung für die Elia-Scheiben. Meine Frau ärgerte sich immer wieder, wenn sie mit der dicken Winterjacke die Türen öffnen wollte. Die Scheibe drückte ihr in die Achsel. Das sei unangenehm. Also entwarf ich auf die…
Everything except Main_Pivot and Rotor_Hub can be printed without supports. I recommend using PETG material or something more heat-resistant for printing so that this Windmill doesn't melt in the summer. Parts needed: x3 Short M3 Screws…
I use these to wind up my arborist throw lines for stringing up my antennas for POTO and SOTA activations. Photos show 80 feet of cord wound up.
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 complete with doors and windows. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed for…
The original clips on the window regulator cables broke when I was trying to replace the regulator in my Mini Cooper R52. The aftermarket regulator came with clips that clearly did not fit, so I modeled the original clip to print myself.…
Used Components: Arduino Nano (must be soldered directly to PCB) ME2108 boost converter Piezo Buzzer TP4056 Li-Ion charging circuit KY032 IR sensor (or any other IR sensor) 1,3" I2C OLED display 2x 18650 Li-Ion Cell Switch (6mm) 2x 7mm…
This is for those that want to add color next to the rear window on the Ford Maverick. This model is solid - there is no cutout of the POWERCAT in this model. :) The back side has a 1mm border to allow for 3m automotive tape. Print face…
Windscreen wiper nut cover for Mitsubishi Pajero Gen 2 (V24). Printed with TPU.
Windshield side winglets can give a bit an optimised stream of air since the BT1100 windshield is somehow narrow at the top. These are specifically done for 4.5 mm-thick windshield that is curved in two directions. There are three size to…
Print Tips Print with tree support is suggested to get clean well fitting threads. Proposed print layout
MMU BOX is a mechanically engineered, mostly 3D-printable rewind buffer system designed specifically for the Prusa MMU3. It replaces the stock filament buffer with a compact, modular system featuring independent active rewind per spool.…
All parts print easily without supports, except the main rod. Once you remove the supports, make sure that the cylindrical part is smooth. To assemble this wind vane, simply stack the parts on top of each other. Double check the…
It is better to print vertically with tree supports so that the latches are positioned parallel to the layers and do not break. window plug drainage windowframe
After making and testing a wind simulator for my sim racing rig, I needed a good case to mount the Arduino Nano safely on my rig. I tried to make the case as small as possible, with easy access for 3x PWM fan output and USB-C and 12v DC…
Wind sensor bracket for Aliexpress wind sensor Wind sensor bracket for Aliexpress wind sensor for wall mounting. I have a Shelly Uni installed and therefore needed a 0-10 V wind sensor that needs to be mounted on the wall. Here's the…
Apr 2026 - recently tried it on my wife's Mazda cx5 and that worked well too. Printed a vertically scaled model for a longer armrest, then crafted/sown together a larger pad, feels great! (Orange IRL pic is scaled up to about 245mm…
🌈✨ Rainbow Suncatcher – Snap-Fit Stained Glass Style Window Decor A cheerful little ray of pastel joy to hang in your window, on your wall, or anywhere that could use a little extra ✨heckin’ happy✨. This stained glass-style rainbow is…
Shelly Door Window housing to compensate for color differences. Shelly only offers the Door Window in three colors, but you wouldn't want a white Shelly on a gray door. PETG or PLA Printed
Polydryer drybox adapter bracket for Stronger Compact Spool Auto-Rewinder by Rans A modified axle with slits on both ends and an axle bracket that allows for the spool rewinder to slide nicely onto the drybox's existing spool holder…
This Auto-Rewinder for Ultimate Filament Drybox combines modified versions of parts from several filament spool auto-rewinder models to provide automatic filament spool rewinding in @GunplaMark 's outstanding The Ultimate Cereal Container…
This Drum , Drum Cap , and Spring Assembly is part of my Auto-Rewinder for Ultimate Filament Drybox mashup. It is published as a separate model only because of different licensing for the original model. Stretched drum, drum cap, and…
Hey all, Here is my remix on the Prusa CORE One MMU3 Community version von Prusa Guy and combine it with the incredible MMU3 / MMU2S 5 Spools auto rewinder adapter for (un)original Prusa drybox / Repbox von Sanka . I really like the MMU3…
If you’ve installed a tall windscreen on your 450MT/IBEX and want to prevent any play in the windscreen adjustment mechanism — and your motorcycle is equipped with a 22mm navigation mount — I have a solution for you. Attached is a model…
I have attached a ring for the optics with rain deflector to the outside ATTENTION: Please print in PETG / ABS or better. Please download the files for the hose adapter from the original creator.…
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
This is a wind-indicator that I made for my daughters dinghy. It uses 4mm diameter rods (I used carbon) with the pieces super-glued in place. The pivot is two separate pieces that are printed together can not be separated. I needed to…
This is my trying to make window stopper for small places when you have not enough space between window and wall. It uses standard EU angle 21 of window sliding. And It works. Plastic PETG. 100% infill 4 wall 0.6 nozzle
General: It's a simple holster for the Caldwell Wind Wizard 2, Wind meter Why I designed this: I designed this while I was working on a school project where we needed to take wind measurements and then quickly have both hands free.…
My OSSC with injection molded case (https://videogameperfection.com/products/open-source-scan-converter/) collected dust via the non uses left window (where buttons are) and thus this cover. Should be compatible with…
I scaled down to 65% and made the walls thinner to make it more springy. Printed of PETG. Then added a 3mm foam tape to make it less slippy.
MOD Sidewinder X4 Guida tubo PTFE con forma arrotondata per evitare che il tubo si pieghi. Monta sull'inserto del porta bobine.
MOD Sidewinder X4 Passa Tubo PTFE. Monta a posto del porta bobine, include foro per avvitare sensore rottura filamento.
MOD Sidewinder X4 Porta schermo touch con alloggio per la stessa calamita che si trova sul porta schermo originale e staffa da montare su box in tessuto.
Test Piatto Artillery Sidewinder X4 Plus S1 per poter controllare il giusto livellamento del piatto stampa di 30x30cm (Print time 5min ca). Consigliabile stamparlo senza gonna e senza tesa.
You should probably print this in PETG or ASA. The photograph is of a quick PLA test. Printer settings: Layer height: 0.20mm Prusa Profile: STRUCTUAL
if you have problems folding, write to me on printables messenger TUTORIAL COMING SOON… This model is designed to last a long time, but print with PET G or better materials. The model contains screws and bearings that must be purchased.…
Wind's Howling! Slim & Modular Plate! 6x2mm magnets, Recommended for print in Translucent PETG / white PLA
Hier findet Ihr ein Modell eines 3-teiligen Luftkanals um den Schlauch einer mobilen Klimaanlage mit Außendurchmesser 150mm besser als mit der originalen Halterung an einem Dachfenster befestigen zu können. Der Kanal ist insgesamt 38cm…
Universal wooden roof window extension rod for opening. My window has 40mm wide frame where I can attach this rod. Source file (FreeCAD) available for possible modifications. Motivation I have roof window (not Velux) which is inaccessible…
This clamp helps you keeping you window or door fixed while you use a portable split AC like the Midea Portasplit. I printed it in PLA, but PETG or similar would certainly work as well.
This model is a housing for the Whelen LIN3 emergency lights and its designed for an F150 and uses double sided tape to stick to the upper portion of the windshield. There is minimal flashback inside the cab and uses a 35 degree angle to…
My father asked me to make a roof for the electrical panel. Why just do it if you can be creative? I found a model of tiles here and designed a roof for it. I also added the ability to install an LED candle. It turned out well. Printing…
Flat radial antenna wire winder inspired by Chelegance MC-750/MA-12 vertical antenna which has a larger winder for 4 radial wires. I made this one shorter and smaller to work with the StLouis POTA 20 QRP Antenna kit which relies on radial…
Introduction / Einführung Quick info: I ordered the INDX Toolchanger with 8 Nozzles on Prusa Launch-day. As soon as it gets delivered I will started with the development for the free upgrade to host the 8 spools, of course still on top.…
A cable winder that you mount to a 10" rack, takes up 1U. Designed to fit my 10" 2020 rack. Supports are are designed in to the print, it will use bridging, carefully cut the thin bridge close to the print on each side. Stick a vecro…
JPG Design3D Seilwindenfenster in 5Zoll Ausführung. Das zweite Bild dient als Beispiel und zeigt nicht das gedruckte Teil.
A vent that you can slide on your car window for use when sleeping in your car. It pulls in fresh air from the outside via a computer fan while being able to stay concealed underneath window deflectors for ultimate stealth. Print on its…
Great original model by Whity . After printing the original version I decided to make a small modification. I moved the position of the upper suction cup mounts to allow for better viewing of the birds, and I made all the mounts a little…
When repairing my Meade Autostar II hand controller, I accidentally lost the small red window that covers the front led. Instead of leaving the opening exposed to dust, I decided to design a replacement part and print it myself. This…
![Jumbo Integrated Rewinder for 2kg Spools for (un)original Drybox [Drum Only]](https://media.printables.com/media/prints/1128144/images/8513432_593bb1d6-475e-4ace-b06c-6081c0e5e862_75880e9b-7293-4a97-97bb-4398e19ca6ce/img_1127.png)
![Universal Vehicle Window Armrest [STURDY!] for Car Truck Van Sedan](https://media.printables.com/media/prints/b2f98d5e-8461-4564-9686-ca987c0a7d27/images/12573660_187261b7-cf9c-4bfa-97a2-c4caca94a7f1_74ab2709-3349-4fe8-91c7-fb1dc5b66efe/20260407_111147.jpg)
