Ratcheting Toothpaste Winder (remix)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.42 – €1.73 net (excluding VAT)
For file: winder parts-v15_0.6n_0.32mm_PLA_MK4IS_1h2m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.57 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 1.03 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Yet another toothpaste squeezer/winder.
- Rating
- 5 / 5
- Likes
- 593
- Downloads
- 2,665
- Makes
- 9
- Views
- 8,168
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes.
Usage
To assemble:
- Pass the toothpaste tube through the frame slot or slide it in from the end.
- Insert the key, straddling the tube, all the way into the frame until it snaps.
- Line up and push the gear onto the end of the key.
- Insert the ratchet into the hole in the frame until it snaps. You may need to turn the key slightly so the ratchet fits between teeth.
To unwind the tube for removal, remove the ratchet; or at least, partially remove it until to clears the gear.