1 / 13
Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A) — image 1
1 / 13

Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.44 – €0.54 net (excluding VAT)

For file: Google 15W Adapter Clip_0.2mm_PETG_MK3S_36m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.49 excluding VAT (range midpoint).

Weight reported by the author
4 g
Print time reported by the author
36 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Compact pebble shaped traveling case for the Pixel Watch charger, with cable winding feature and power adapter mount.

Rating
4.773 / 5
Likes
97
Downloads
477
Makes
28
Views
3,608
Reviews
22

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Updates since initial upload:

DateDescription
02/23/2023

Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger.

Thanks to Martin Th. for providing me with the dimensions, and the printing and testing. If anyone tries with a different 3rd party charger and it requires some tuning, let me know.

02/10/2023Added a version of the HyperJuice Power Adapter clip for EU (with the attachment on the large side)
11/11/2022Increased tolerance slightly so it prints better (at 0.1mm layer height the two parts could get stuck)
10/27/2022I added a clip design for the HyperJuice charger
10/26/2022 later

I uploaded the clip for Google's 15W USB-C power adapter.

I updated the base of the case to fit on the clip. I also adjusted the vertical tolerance between the core and the ring of the case.

10/26/2022Initial upload

This new design for the Pixel Watch charger traveling case was inspired by retractable USB cable solutions. It makes for a compact and easy to use solution you can carry around.

Printing:

The case should be printed in place without any support. It is designed to be printed in place.

The power adapter clip I printed with support.

Assembly/disassembly:

  1. Align the core's cable hole with the ring's cable hole.
  2. Feed the cable through all the way, and clip the pad in place.
  3. Use the bottom handle to roll the cable up in the case. Keeping some tension on the cable while doing so can help.
  4. To disassemble, unwind all of the cable, and pop the charging pad out of place by pushing through the bottom hole.

 

Size comparison with the Pixel Watch charger travel case:

Tags