Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,44 € – 0,54 € netto (bez VAT)
Dla pliku: Google 15W Adapter Clip_0.2mm_PETG_MK3S_36m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,49 € netto (środek widełek).
- Masa podana przez autora
- 4 g
- Czas druku podany przez autora
- 36 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Compact pebble shaped traveling case for the Pixel Watch charger, with cable winding feature and power adapter mount.
- Ocena
- 4,773 / 5
- Polubienia
- 97
- Pobrania
- 477
- Wydruki
- 28
- Wyświetlenia
- 3608
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Updates since initial upload:
| Date | Description |
| 02/23/2023 | Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the dimensions, and the printing and testing. If anyone tries with a different 3rd party charger and it requires some tuning, let me know. |
| 02/10/2023 | Added a version of the HyperJuice Power Adapter clip for EU (with the attachment on the large side) |
| 11/11/2022 | Increased tolerance slightly so it prints better (at 0.1mm layer height the two parts could get stuck) |
| 10/27/2022 | I added a clip design for the HyperJuice charger |
| 10/26/2022 later | I uploaded the clip for Google's 15W USB-C power adapter. I updated the base of the case to fit on the clip. I also adjusted the vertical tolerance between the core and the ring of the case. |
| 10/26/2022 | Initial upload |
This new design for the Pixel Watch charger traveling case was inspired by retractable USB cable solutions. It makes for a compact and easy to use solution you can carry around.

Printing:
The case should be printed in place without any support. It is designed to be printed in place.
The power adapter clip I printed with support.
Assembly/disassembly:
- Align the core's cable hole with the ring's cable hole.
- Feed the cable through all the way, and clip the pad in place.
- Use the bottom handle to roll the cable up in the case. Keeping some tension on the cable while doing so can help.
- To disassemble, unwind all of the cable, and pop the charging pad out of place by pushing through the bottom hole.

Size comparison with the Pixel Watch charger travel case: