Counting matching models…
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
UPDATE! GET THE NEW VERSION HERE -Charger Cable Organizer 2nd edition- Due to many not reading the print instructions i've now put the instructions on top of the descriptions. PLEASE READ BEFORE PRINTING!! " Print instructions: Version 1…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Designed with a spring-loaded snap mechanism , it allows quick access while keeping cables securely in place. Function The mount features 5 slots , each suitable for cables up to Ø7 mm . To open the mount: Press the textured side outward…
Simple wall mounted hanger for audio jack cables (1/4 inch, 6.3mm).
This "come-along winch" from Menards has a two-to-one reduction pulley. The cable can jump the sheive and get jammed against the side wall. The spacers take up the excess space, keeping the cable on the sheive. I used PETG because it is…
Potřeboval jsem označit kabely domácího kina. Určeno pro dvoulinku do 8 mm šířky. I needed to label my home theater cables. Designed for two-line up to 8 mm wide.
Hook and loop cable manager for vertically or horizontal management. The pathway is also big enough for zip ties.
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
Cable Management EcoSystem Convert your environment into Factorio! Simple Clip to hold cables +6 diffrent styles of Trays! And few more in files ^^ Simple mounting way! Normal Head Cap Screw M4 Heat Insert (4-5mm) Countersunk Head Screw…
Ein Modell von einem Kabelkanal für Alu Profile der 30er Reihe TypB mit 8mm Nut. Zum einen dient der Kabelkanal zur Verlegung von Kabeln und außerdem noch um einen 10mm LED Streifen auf der Außenseite zu befestigen und so z.B. eine…
I wanted to light up my HomeCube with a white LED strip and turn it on and off using a small power switch from the outside of the HomeCube enclosure. Therefore, I modified the original base foot corner so that my switch fits perfectly…
I have printed several of these and have four patch cables ready everywhere I need them! Can be screwed or velcroed down.
Prints in two parts to avoid impossible to remove supports. Looks quite good. Did not glue them together to make it easier to fit/remove the cable. I know the photo is not as neat as some would want it, but it hides the long cable in my…
Uses 4 magnets for if you wanted a more permanent fixture you could also use a bit of superglue along the lip and groove, for adhesion id recommend superglue, adhesive strips or double sided sticky tape 3X1mm magnets…
This is a multiple cable holder, that can be used for cable management, use 2 pointed screws to attach it to the table. No supports needed. Happy Printing :)
Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Each Magnets:…
Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
Inspired by the LTT magnetic cable management holders I designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
recogedor de cable. No necesita soportes. wire clip wall. Free suports.
Slide this cable management bracket onto your desk and tuck all your cables up under the desk, or along the back of the brackets. Desk can't have a lip or non-uniform top surface as the clip slides onto the edge of the top surface of the…
Use this to hid your cables running up the wall and clean it up a bit. Print it in a color that matches your wall. The domed cover prints best standing vertical. Use glue and a skirt to print the best. Screw the wall base to the wall with…
Keep charging cables ready, hanging off the side of your desk. Uses a wedge to lightly clip the desk. Source:…
Because the gravity could ruin your print, I just made this little thing
This allows the SB2209 USB can-bus cable to stay in place with a pair of cable ties.
Great Models, just the Bed Cable Base Mount did not fit 100% on my Ender 3 V3 KE, so i tweaked it a little: - small cut out for the hole on the inside - model is 1mm longer and removed chamfer on the bottom - small clamp on the top
This cable manager is specifically designed for organizing and routing essential but infrequently accessed cables, such as HDMI, DisplayPort, USB, and power cords. It's the perfect solution for hiding cables under your desk, helping…
This lets you use a keystone jack in the hollow part of a spool to give you the ability to have one end buried but still usable. This lets you re-use spools, which can be helpful because PC can be harder to recycle.
This is a simple cable management bracket. I used it to organize cables in my studio. I used PETG. 0.2 mm layers. With 20% infill and 3 perimeters, the bracket is firm and flexible enough. Check the drawing for the exact measurements.…
Created this for my V0.2 to secure cables going up into the z cable chain with a zip tie.
Printed in Creality EN-PLA+ Blue at a 0.3mm layer height and 0.4mm nozzle with 3 shells and 15% infill.
Print the 2 parts and glue the lap joint. This model does not house a starlink plug adapter as I have converted to normal RJ45 plugs. Board houses 12v>>48v and 24v>>48v PSUs. Also added a USB LTE stick.
Based on the 67W adapter, I made a new design to fit the smaller 70W adapter.
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
A 90 degree hook/guide that can be mounted on double-sided adhesive tape under desk to help manage cables. No supports or gluing required, compatible with cables with an outer diameter of up to 5 mm. + bonus: simple cable hook in this…
Qidi X-MAX3の為の部品です。 ケーブルキャリアが右奥に移動した際に、フレームリブに干渉してしまう恐れを回避する部品です。 右側のステッピングモーター取付フレーム、上部にある四角の穴に差し込み使用します。
This is a sizable cable clip. You can size it however you need in your software. It easily screws into your desk. Print Settings: Supports: Yes, on the overhang. Infill: 15% or higher. Materials: Any hard.
The original version from Acker_666 didn't fit perfectly on my new Artillery Genius printer. That's the reason why I had to redesign and improve it. I have added a vertical wall so that the Flex/Cable does not exert all the force when…
A little disclaimer, this is the first time ever I upload a model, feel free to add positive feedback how to improve :D Since a few months I built myself a little networkcloset and I wanted something to manage the cables so it looks…
Cable tag for power cable. I set the pause in the slicer wrong. 😅
The cable inside the Pole voima frame is secured with tape. I made a clip to secure the cable and bosch display cable inside the frame. There are two files. One is 5mm-5mm-3.5mm. The other is 5mm-4mm-3.5mm. Fix it with 3M super strong VHB…
This is the 45x12 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x23 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x45 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
Permet de ranger les câbles patch d'un synthétiseur modulaire. Compatible avec la plupart des patch. J'imprime avec 4 parois 13/100 Possible d'écrire ce que vous voulez sur la face avant me demander en MP ( faut pas être pressé je ne me…
Simple and minimalist cable holder for sculpfun laser engravingers It uses 2 m3x4 bolts.
A simple cable comb for sleeved PCIE 6 pin cables, tested on sleeved wires with a total diameter of 3.1mm.
cable organizer assembly instructions after printing insert the small ring into the large ring
Simple and easy to print clip to store your cables. Scale it up or down to fit your requirements.
Organize your cables and store them with this cable hanger. The hanger can be mounted using two screws and holds up to six clips.
Designed this adapter model to provide a snug fit against the router base, as well as allow adequate room for the latch to move once the adapter is attached to the base. Two models are provided: Generic connection to a dust collection…
This custom-designed 3D model is a practical solution for organizing USB cables on the IKEA Skådis pegboard series. It allows you to securely attach USB cables to the Skådis system for quick and easy access. The cables can be effortlessly…
support fil de busse et du ptfe (voir photo ) vu que sur l'origine il y a un support pour l'accrocher vu sur le model alu il y pas donc voici ce stl qui pourrait vous aider :)
I designed this part for my FlexiSpot E5 to replace the net, that came with the desk to hold the cables. I added holes to make it filament-saving. I can only confirm the fitting on the E5-model. Please let me know, if other models work…
To making the handling for our fairy lights a little bit easier, i made this clip. The clip is for perforated plates with 15x15mm holes.
Wall mounting holes 5.5mm in diameter. Printed 0.2mm, PETG, 250C, no supports needed.
Cable brackets for both a single cable and multiple cables. You can screw these brackets to a surface but also, for example, stick them to a surface with double-sided tape. Set the infill to 100%.
Description A compact 3D-printed chain cable management solution originally designed by Harpreet Singh to keep cords neat and tangle-free. While the circular design allowed for ease of use, frequent opening caused cables to come loose. To…
To be used with STL file SV06 Plus Filament Holder w/Guide and Retractable cable holder ➕ ・Template to download and 3D print・Cults
Cable organizer for 3mm cable like Apple Watch cable or iPhone cable
A simple arc that can be stuck in the holes of an Ikea Ivar shelve and will help with cable management. The modell has a slightly thinner profile at the two ends and thickens towards the arc to better stay in the holes. If you have…
See original. Just print it two times and glue the two prints together.
Power cord holder for power supply Diametral. PET-G Nozzle - 0.4 Layer - 0.3
Intro A simple, clean-looking 3D-printed cable clip designed to help you organize and secure cables on desks, walls, or under shelves. It keeps cords tidy, prevents tangles, and adds a neat finish to your workspace. Attach it with…
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm 12/01/2025 added: CPM_USB CPM_Ø7mm CPM_Ø9mm 19/01/2025 added: CPM_Rj45 Long Patch CPM_Ø6.5mm 10/03/2025 added: CPM_USB Ø3mm CPM_USB Ø4mm…
A little thicker than the original as well. Category: Toys & Games
remix to accomodate a direct drive upgrade with hydra system. Category: 3D Printer Parts
A simple cable ring made in TinkerCAD. Useful for organising cables in your workspace. The design can be scaled to suit your applications.
Cable clip that i design for my ASR4 sim rig from Advanced Simracing, it will fit other 1st gen Advanced Simracing rig or monitor stand. Advanced Simracing is North American therefore they use imperial 15 series extrusion (1.5in) This…
Very small cable organizer. Full parametrized model. Can be adjusted. 3 size predefined (small, medium, large).
I made these for my telescopic tripod hence the 3 different sizes. Small and easy to print. Not much else to know.
cable organizer hook with divider. so you can separate power cables from the data cables.
cable organizer hook with divider. so you can separate power cables from the data cables.
# CableSaver ## Description This Thing has been desinged to save cable behind between a piece of furniture and the wall by keeping a minimum safety gap. This has been desigened for standard german cables like H05. This model is…
I designed these in onshape cad with parametric variables in mind these are 30mm wide by 45mm long for 6x3mm magnets but I also designed the untested 90mm length. I decided I like the look of 45mm segments better and the weight of cable…
These are designed to allow for simple cable management within the beam running across the desk. The pocketing grants less material usage, ability to pull cables through as well as squeezing thin plugs through. Two of these have the…
This is a quick little hook that I made to hang the power cable for a wireless camera I have. We rent, so I can't do anything more permanent. it has a 0.8mm wall thickness. There are two variations, A shorter hook that can hold a small…
I mounted mine to the side of my garage cabinet, and I only had 1 hole to use! Remixed from model from User named Bukken. 10mm through hole, and can be reached through the hex pattern. I printed white to match my garage cabinet too… :-) I…
The holder uses 4x magnets of the size 8x3mm (Link to aliexpress: https://s.click.aliexpress.com/e/_oDwm2eR) And i also have some inserted slots to use some velcro cable organizer 10mm width (link to aliexpress:…
***********V2 NOW AVAILABLE*********** Reusable Cable Tie / Zip Tie - Easy to use This easy-to-use cable tie is perfect for organizing and securing your cables. It ensures your cables stay neatly in place or within a bundle, whether under…
requires 4 m3 heated inserts (2 to mount the kubsa and 2 to mount it to the bed) make sure to print in petg or better make sure you set this as the y axis inputshaper I will update if the orentation of the kubsa ends up causing errors
Scale to any size. Print 2 per cable, I suggest wrapping the cables in circles then clipping them. I have printed 100's and use them daily
***********V2 NOW AVAILABLE*********** Reusable Cable Tie / Zip Tie - Easy to use - Rounded End (Remix) This easy-to-use cable tie is perfect for organizing and securing your cables. It ensures your cables stay neatly in place or within a…
It fits on the side of the printer and connects using the rails. No screws or anything needed. The main body is printed in 2 parts (Because of bed size), although I include a one part version. Any number of clips can be added to hold the…
Kabelhalter für eine Tischplatte mit der dicke von 2cm oder mehr. Ich Empfehle das Neue Modell zu nehmen da beim Alten es Passieren kann das das Kabel rausrutscht. Andere höhen werde ich bald hochladen (1cm,1.5cm,2.5cm).
After a lot of frustration with off the shelf cable organisers and other methods, mostly fixed with screws in cage nuts, I decided to make something that can just click in place. Then I realised that I might want to take it off again, so…
Keep your cables organized with this modular low profile cable tray. Perfect for computers and power strips, this tray will be able to hold the charger bricks and cables to keep them organized and out of sight. I recommend printing parts…
These models allow you to cover up a 2.5" diameter hole saw hole in drywall. They have an opening for routing cables through the hole.. There are two variants, for 5/8" and ½" thick drywall. This was designed in Fusion 360, you can get…
UPDATE: 02.02.2022 added Dia Label on Backside added 30mm and 60mm Version DE: Rohrbeschriftung für 30, 40, 50 oder 60mm Durchmesser mit einschiebbaren Label. Befestigung mit zwei Kabelbindern. Größe der Labels: 54x104mm EN: Pipe labeling…
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
I needed a junction box to hold a small 5V PSU-Board as well as a Relais-PCB within an REV-Ritter cable duct. Here is an qick model for that. It can be fixated wihin the duct with the two T-Screws. I left some space on the bottom of the…
This is just another zip tie cable holder. It is a copy of the ones sold on Ikea many years ago.
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
