1 / 19
Cable Organizer with Slide-in Lock – Various Sizes — image 1
1 / 19

Cable Organizer with Slide-in Lock – Various Sizes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A round cable organizer with a sideways slide-in lock mechanism in various sizes.

Rating
5 / 5
Likes
55
Downloads
239
Makes
1
Views
1,226
Reviews
1

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

This is another design of a cable organizer for power and network cables. It has a slide-in lock to easily add and remove cables. The design is specially made for the FFF process printed with PETG or ASA filament.

How to Print the Cable Organizer

There is a Prusa Slicer example project LR2208-055 Print.3mf where all recommended settings are made. Use this, or see the table below:

Orientation:The cable organizer is printed on its side.
Nozzle Size:0.4mm, 0.6mm or 0.8mm
Layer Height:0.2mm for 0.4mm nozzle
0.3mm for 0.6mm nozzle
0.4mm for 0.8mm nozzle
Filament Materials:PETG or ASA
Perimeters:3 perimeters (important!)
Infill:0%
Prusa Slicer Profile:“0.2mm Quality”
Extra settings:
  • Enable “Avoid Crossing Perimeters"
  • Disable “Fill Gaps” (only for 0.4mm nozzle)

I do not recommend using PLA for this model. Especially for the smaller diameters (<70), the material is too stiff and brittle for the lock to work correctly. Use it at your own risk.

Dimensions

The part number and file name have the following format:

LR2208-<inner diameter>.3mf

Inner Diameter

The inner diameter of the model is specified in millimetres. The slide lock is harder to operate on smaller diameters.

How to Use the Cable Organizer

This cable organizer is designed to be screwed to a wall, ceiling or under a desk or other furniture. Use flat head wood screws 3.5mm or 4mm ones.

If you attach the organizer to a wall, make sure the lock is on top. 

The sliding lock is designed to block when a small pulling force is applied to it. The grooves from the layers will interlock in this case and prevent it from sliding sideways.

Alternative Design

There is a more rectangle design with a ring lock:

Explore More from Meti·kumi

Interested in my designs? Browse through my collection of 3D models:

👉 https://metikumi.com/3d-models/

Stay connected on social media for the latest updates and work-in-progress insights:

👉 https://metikumi.com

Conclusion

I hope this cable organizer will tidy up your server room, desktop or living room. If you find this print useful, please rate it and upload photos of your prints. 

Happy printing! 😄

Tags