Prusa MK3 / MK3S / MK3S+ LCD cable clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's specifically designed not to wiggle, as pre-existing LCD cable clips for the MK3(S) did and thus were…
- Rating
- 4.956 / 5
- Likes
- 265
- Downloads
- 1,284
- Makes
- 43
- Views
- 6,129
- Reviews
- 45
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
It's specifically designed not to wiggle, as pre-existing LCD cable clips for the MK3(S) did and thus were unsatisfactory to me.
The opening of the "hook" should point down for a clean look and easy insertion of the LCD-cable.
If this helps you out, please like, rate and/or share a picture of the result! Otherwise, please leave a comment with feedback 😉
Credits
This is a remix of the 2020 V-Slot LCD-cable clips that have been developed for the Bear-upgrade by Grégoire Saunier.
It has been adapted for compatibility with the 3030 T-Slot extrusion as found on the MK3(S).
Print instructions
Since I specifically made them not to wiggle, they have been designed to be a good, but tight fit. I recommend that your extruder is calibrated for the filament you use, since overextrusion could make it too tight.