Counting matching models…
Since I like the design of the original spoolholder 2.0 from Ratrig for its simplicity , I've redrawn it in the same style. The smaller one will fit a spools max 80mm wide (almost all 1kg spools), and the larger one will fit maximum 110mm…
Reworked the original joint to account for materials that shrink when cool, such as ABS/ASA.
Ein Modell von einem Kabelkanal für Alu Profile der 30er Reihe TypB mit 8mm Nut. Zum einen dient der Kabelkanal zur Verlegung von Kabeln und außerdem noch um einen 10mm LED Streifen auf der Außenseite zu befestigen und so z.B. eine…
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
Designed for 30x30 and 30x60 “Bosch”-style aluminum extrusions, this tool enables the drilling of D11 holes 18mm from the end of the extrusion, while vacuuming up the aluminum shavings at the same time (for standard 30 mm vacuum…
This is a twist-in 3030 extrusion mount for the Thermistor found inside the Sunlu S4 Dehumidifier. The mount uses the screws that held the thermistor in place inside of the S4 unity.
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
The 3D Printable, Modular Spoilboard for the Sainsmart Genmitsu 3030-PROVer MAX CNC consists of 4 interlocking panels that can be mounted directly on to the aluminium bed of the 3030. As the spoilboard gets damaged during machining you…
GoPro Mount / Webcam mount for 3030 Alu Profile / 3d Printer - Staffa montaggio per profilo 3030 / Stampante 3D Suitable for: https://www.printables.com/model/1171796-gopro-mount-extension-estensione-per-gopro…
This is an adapter/arm for using Sapencils great PITFT50 Shroud with standard 3030 aluminium extrusions. Two 10mm M5 screws with t-nuts are required for mounting. I just uploaded the newly designed mount (both as STL and FreeCAD .fcstd),…
Designed for my own printer, I needed a low-profile umbilical mount since the rear fan duct may overlap the rear profile during movement. the holes are M5 screw holes to be used with M5 T-nuts, i use two M5x14mm screws the hole for the…
Sturdy Corner Bracket with Ribbed Reinforcement – Heavy Duty for 2020 / 3030 / 4040 / 5050 V-Slot & T-Slot aluminum profiles Perimetric reinforcing rib for superior strength Optimized profile geometry – better resistance and easier…
The most stable result is achieved when the model is printed with the chamfer as the base surface. Suggestions for improvement are welcome Das stabilste Ergebnis wird erzielt, wenn das Modell mit der Fase als Grundfläche gedruckt wird.…
Basic Mount for 3030 Extrusion to a flat surface, such as a desk. You can either use screws or a BESSEY Die Cast Screw Clamp LM 150mm to mount it to your desk. The 3030 extrusion can be fixed to the base with T-Slot Nuts with M6x12 screws…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
Always bothered me that I need to get special equipment and find suitable screws to easily attach simple, small or lightweight things to my extrusion profile. This hook solves all the problems. Just insert and twist and have a quite…
Cable management solution for 40x40 or 30x30 Aluminium (aluminum) extrusion profiles.
I needed to make an enclosure for my cnc micro mill to contain dust and chips, so I grabbed some 3030 extrusion, and used some high quality double sided tape to mount 0.060" (~1.5mm) clear polycarbonate I had laying around. There are two…
i do an x version for cross profile mount
Spool holder for 3030 extrusions - extendable with the original Prusa spool holder rod - For example, to deposit a second spool for 2-color printing or to move the spool to a more central unwinding position - see pictures.
I designed this adapter plate to fix the Mellow LLL Plus Filament Buffer on my Ratrig V-Core 3.1 which has 3030 extrusions. Obviously, it can fit any printer or enclosure using 3030 extrusion. The plate is reversible, you can have the…
I used this on my HEVO with StealthBurner hotend. I lowered the top-front 3030 extrusion to hold the brush and allow for more travel room with the StealthBurner. The model is printed in parts with no supports needed. There are 4…
Small Filament poop bucket on 3030 frame. Used on a Boxturtle enabled HEVO printer with 3030 frame. This is the first design, it may be too small.
I created this remix because I really like self-locking nuts, and while I was at it, I wanted to make the part more ‘support-free’. I printed it in PCTG (but I don’t think there’ll be any issues with PETG either). Layer height: 0.2 mm.…
I had to lay some wires from the upper to the lower side on the backside of the RatRig. To prevent them touching the belt, I've created this simple bridge. It snaps on the 3030 and has openings to fix the wires inside the extrusion. Print…
Just a simple foot mount that will allow you to mount your Genmitsu 3030 ProVer CNC to a fixed location in an enclosure. This will likely also fit the 3018 CNCs as well, but this was designed to work with the 3030. Use a couple M3 wood…
A simple holder for your daylight on a stick LED strips to mount on a 3030 aluminium extrusion. When using in an enclosure it should be printed in a temperature resistant material such as ABS or ASA. Currently mounted in RatRig Vcore 4.
This is a simple cable clip for 30mm Alu extrusion (8mm slot). No tools or screws needed, just twist it in and secure your cable with a zip tie. No Supports needed (laying on its side). I made multiple sizes for different cables. Here you…
Works surprisingly well! Remixed 3030 Extrusion Style LCD Control Knob for Prusa i3 MK3 printers. Scaled down from full 3030 size to make a appropriate sized knob. Print instructions Download. Slice. Print. Install. How I Designed This…
Inspired by https://www.thingiverse.com/thing:2843889 I used the one linked above for the Pi3, but needed an upgrade for Pi4 and decided to use a noctua 40x10 fan, as the new raspberry runs a little hotter. This can be mounted on any side…
Allows mounting of 3x 5 port Wago to 3030 aluminum extrusions for 3D printers
LED Holder fits a standard 10mm wide LED flexible strip. Clip then engages the back of the holder and snaps into the 3030 aluminum extrusions and allows for some adjustment of the angle of the LEDs. Pictures are these installed on a 400mm…
Reworked the original joint to account for materials that shrink when cool, such as ABS/ASA.
Cap Cover for 3030 Tslot Profile Suitable for: https://www.printables.com/it/model/809284-3030-tslot-aluminium-profile-adjust-the-z-scale-to All our designs are free to download and use—because sharing drives innovation. Your support…
Scaled clips for 3030 profiles Can be used for Voron VEVO: https://www.printables.com/model/529700-vevo-hypercube-evolut
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Many thanks to Anlin from the Annex Engineering team for their original design! I love using variations of these clips on all of my printers, as they hold the panels in securely, and require no cutting or drilling of the panels, and no…
Note: when trimming this profile to length in the slicer, please don't use the scale feature since this would mess up the threaded hole. Use a Z cut instead. This is a 3030 aluminum extrusion profile optimized for 3d printing. This is…
Simple clip-on to 3030 profiles for usage with dayspring LED strip. Beware: the fit for the LED strip is quite tight. I use it with my Ratrig V-Core 4. ASA or ABS filament should be used
This is a remix of kuhnikuehnast's silencer case (without the silencer) to mount the Berd-Air pump horizontally from 3030 extrusion. I liked the way the pump mounted to the lid of this case but wanted a direct to frame mount that wasn't…
A jig I made to better grip and center my hand tap (this style: https://amzn.to/4e0z4tK) for aluminum extrusions. Best printed out of something durable, PETG or ABS/ASA. Available for 1515, 2020, and 3030 extrusions.
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Supports muraux pour 2 serres-joint WOLFCRAFT PRO L 3030 - Valide pour toute la famille de longueur
remix of: https://github.com/Rat-Rig/RatRig-PrintedParts/blob/main/V-Core-4.0/PP000285-vc4_ptfe_guide_lower_V01_20240416.stl I changed the orientation of the part.
A simple snap-in bracket to mount Daylight On A Stick (https://github.com/VoronDesign/Voron-Hardware/tree/master/Daylight) or similar LED strip PCBs to a 3030 extrusion at a 45 degree angle. Requires one “Voron-spec” heat-set insert (OD:…
Fits Ford Raptor 2017-2021 Lamp: https://grufmanbil.se/produkt/swelight-p-ljus-roekfaergad Designed with a very tight fit can be scaled up if needed
Profile Connector 90° for 2020 / 3030 / 4040 V/T-Slot Profile Resize to adjust dimension s 30/09/2024 added Conn40x85x40mm M8.stl All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our…
3030 profile support for smart Filament senso by BTT.
I made a support for Eviciv 7 inch screen for 3030 profile with "RatRig V-Core3" written on it. Print Settings Printer: Caribou Duet 320 Rafts: No **Supports:** No Resolution: 200 **Infill:** 15 Filament: Polymaker PETG Black Category: 3D…
Ein Modell von einem Kabelkanal für Alu Profile der 30er Reihe TypB mit 8mm Nut. Zum einen dient der Kabelkanal zur Verlegung von Kabeln und außerdem noch um einen 10mm LED Streifen auf der Außenseite zu befestigen und so z.B. eine…
A remix, see Differences section. OpenSCAD source here: https://github.com/spegelius/3DModels/tree/master/M4_slide_t-nut_3030_remix
My design for PSU Meanwell SP-320-24 mount on 3030 aluminum profiles. It is designed for my DIY printer and i don't know if it gonna fit on yours. So let me leave some blueprints with dimensions: 119 / 54 / 110 (W, D, H) with 2mm…
I didn't like the color of the end caps that came with the Cube connectors so i made this so i could have something more interesting than dull grey :)
Basé sur les profilés 3030 d'origine de la Prusa XL. Cela permet de rajouter un profilé de chaque côté pour pouvoir fermer la partie basse de l'imprimante et fixer des portes. Matériel nécessaire: 4x vis M8x12 à tête plate à six pans…
I wanted to use all this 3030 extrusion I have lying around so I created a simple mount for the ERCF's 2020 extrusion. 2020 to 3030 mount The “gearbox bottom panel” is replaced with mine “gear_box_bottom_panel_flat”
3030 corner bracket to be used together with M5 screw and m3 with nut Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: Doesn't Matter Supports: Yes Infill: 100% Category: 3D Printer Parts
Needed some M3 drop-in nuts for 3030 extrusion since M3 is all I have on hand but couldn't find one to print, hence this. It seems to print best in the default orientation but YMMV. Hope you find it useful. Update: Added a version with a…
I created this for my HevORT (see hevort.com) for the Goliath Short with adapted Tentacool. It is mounted below a 3030 extrusion. Height can be adjusted in a range of 5mm. A 5mm metal rod is used to join the parts, cause i dont like…
This is a remix of: https://www.thingiverse.com/thing:2802540 Thanks @Brigandier for supplying the Fusion file! Uses M3x16mm screws. Print instructions Category: Parts Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
A basic low-profile mount for mounting a Raspberry Pi camera on a Prusa Mini. Designed around a camera v3 model but likely will work with a v2 as well. A small slot is modeled in for a LED light strip, such as this one on Amazon .…
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
clip to hold 3mm panel & about 3mm EDPM tape (compressble tape) on the panel to create a sel betwwen the extrusion
I needed two m3 tslot nuts. Didn't want to wait a month for stuff from china. Takes a standard m3 nut In openscad Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Prusa Printer: i3 MK2S Supports: Yes Resolution:…
EN: These are remix variants of martonas excellent revision of my original debris bucket . His version improves my design as it can be printed without support and hooked firmly into the 3030 profiles. It also stabilises slot-in nozzle…
Designed for 30x30 and 30x60 “Bosch”-style aluminum extrusions, this tool enables the drilling of D11 holes 18mm from the end of the extrusion, while vacuuming up the aluminum shavings at the same time (for standard 30 mm vacuum…
3030 extrusion cable cover. File contains a STL with a 5mm sized clip, in your slicer change the scale of the Z to any size you require, make sure any uniform / linked scale is turned off. Printed at 0.4 layer, 3 walls A brim may be…
Slots into a 3030 frame. Print with supports with the 3030 slot on build plate. Hole cut out is just for less material usage, Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15 Category: 3D Printer Accessories
Remix of 3350772 with 3030 mounting brackets. Front & back files. Mount support M6 bolts with 10x6mm bolt heads. Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10 Category: 3D…
A 3030 corner bracket for Z X axis cross over. Compact design with tight tolerances on bolt heads. M6 bolts with 6mm head or smaller required. Print with thick walls and sturdy infill. Edit: Widen holes Print Settings Printer Brand: Anet…
This is a twist-in 3030 extrusion mount for the Thermistor found inside the Sunlu S4 Dehumidifier. The mount uses the screws that held the thermistor in place inside of the S4 unity.
This is a basic 3030 extrusion mount for the SP602E Bluetooth LED Controller ( https://www.amazon.com/BTF-LIGHTING-WS2812B-Bluetooth-Controller-Outputs/dp/B0B1DJVG4Q?th=1 ). To mount the controller to the mount, 2x 6mm-8mm M3 bolts and…
Protective Enclosure for the Sainsmart Genmitsu 3030 Prover Max – Modular, Functional, and 3D-Printable! This high-quality protective enclosure is specifically designed for the Genmitsu 3030 Prover Max CNC machine, offering optimal…
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
Cable clip for Raspberry Pi Cam V3 on alu extrusion of the Prusa XL
I needed to place my BTT Hdmi7 on the side of my enclosure, so I made this remix of the very nice case made by @ Artxime . There is a version for both 2020 and 3030 extrusions. I also added some holes for zip ties. Insert the zipties…
A 3D printed corner bracket for 3030 (30mm) aluminum extrusions. These work with Rose & Krieger extrusions available at Digi-Key These can be printed with or without support material, Best print orientation seems to be with the external…
This is a mount for a standard 1KG spool onto a 3030 extrusion, or RatRig V-Core printer. This is so you can mount to the front or the back without interfering with the extruder assembly. You need: 2 40mm M5 bolts 2 M5 nuts to embed into…
Simple motor/extruder mount for aluminum profile 3030 . Mounting 2x T-nuts. I used to: https://www.thingiverse.com/thing:4266299 M6 Nuts 3030 Works well with: https://www.thingiverse.com/thing:3635423 Filament: Devil Design PLA
A simple holder / mounting for a mini-hygrometer on 3030 profile (up and down usable). If you want support me, buy me an coffee :-) buymeacoffee.com/3dwt
Made for Voron Daylight on a stick XXL (mounted on my RatRig V-Core 4 400) BOM for one led stick supports 2 pieces x M3 threaded insert 2 pieces M3x8 (or M3x6) 2 pieces M6x12 2 pieces M6 T-Nut for 3030 Voron Daylight on a stick support…
For my Ratrig vcore 3.1 i want adjustable feets. The Original plates at the corners are on their places for stabilization. I used adjustable feets with M8 and 30mm lengths. Could be usaed also for vcore 3. If you want support me, buy me…
This mount requires unscrewing the back of the sensor housing and replacing the regular screws with M3x12mm screws to attach the sensor housing to this mounting plate. You then can attach it to your 3030 printer frame using two M5x8mm…
This is an adaptation of Eddie the Engineers' LED mounting, which incorporates baffles so that the LEDs are not shinning in your eyes when looking from in front of the printer. Instead of the “bead on a string” approach like the original…
panelsclip for 3030extrusion to fit 1,5mm thick side panels
End caps for 3030 aluminium profile. I have bought profile on e-hlinik.cz which has square holow at the middle bill of material: Inbus M5x10 bolt and nut Can be used on ReDuplicator i3 frame. https://www.thingiverse.com/thing:2686588…
This is a foot designed to attach to the bottom of the HyperCube or HyperCube Evolution frame (or any other 2020/2040 or 3030 aluminium extrusion printer) to lift it up, letting you put stuff underneath or attach feet easier. The picture…
Bracket for WRNT temperature sensor with M6 thread for mounting. 2 different versions available. 1x M3 for fastening to the aluminum profile with an M3 screw and M3 T-slot. The other with M6 screw. -------------- Halterung für…
A temperature control bracket for mounting on the side of a 3030 aluminum profile (the cables are routed up or down the profile without pinching anything). -------------------------------- Eine Halterung für Temperatur Steuerung zur…
Here's a case for the HDMI7. I remixed it to fit my upcoming vcore4 build. You need : 2x M6 locking nuts 2x M6 HexScrews 30mm Add a pause during printing to embed the m6 locknuts into the knobs.
I used this magnetic coupling on my old Prusa i3, and found it very convenient to use. On my new VCore 3, I mounted a spoolholder on top and needed a reverse bowden for the filament path. Since I also want to use my Palette Mosaic with…
The 3D Printable, Modular Spoilboard for the Sainsmart Genmitsu 3030-PROVer MAX CNC consists of 4 interlocking panels that can be mounted directly on to the aluminium bed of the 3030. As the spoilboard gets damaged during machining you…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
Hey, i designed a Double ECAS filament goude connector to handle mor flexibility with filament Dryboxes or shorter PTFE tube usage :) I added a 6 to 4mm V2 with improved filament path… 2-3mm logner so it will be not stuck anymore at this…
Description It is needed to unscrew original screws from stepper motor and replace them by 5 mm longer ones. BOM 4x M3x40mm countersink screw (for standard size NEME17 stepper motor)
Model This is a toolholder for the Z-beam of the Prusa Mini, but can be used on any 3030 Profile. Works great for me. Printing instructions This is a small part, so make sure your bed is clean. The part is optimised for the following…
Small Container Box for 2020 / 3030 / 4040 Vslot Profile Prusa XL Voron Sovol Suitable for: 2020 -3030 -4040 V-Slot T-Slot Alu profile 3d Printer Suitable for: Prusa XL - Ratrig - Voron - Sovol Update: 11/02/2025: added Prusa Logo version…
Fake Aluminum Profiles 30x30 (print and try before buy). For prototyping or as a toy. Disclaimer: This model is for testing purposes only and must not be subjected to static or mechanical stress!
thanks Rich T for the original model. 3030 dropin mount was salvaged from here: https://www.prusaprinters.org/de/prints/43347-raspberry-pi-3a-case-click-in-3030-rail
Model A simple and quick solution for attaching cables with a 8 mm diameter to a 30x30mm aluminum profile with a 8 mm slot. Fits perfectly on a Prusa Mini. The following goals were pursued: Easy assembly Easy disassembly Reusable Secure…
