1 / 3
SP602E Bluetooth LED Controller 3030 Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a basic 3030 extrusion mount for the SP602E Bluetooth LED Controller (https://www.amazon.com/BTF-LIGHTING-WS2812B-Bluetooth-Controller-Outputs/dp/B0B1DJVG4Q?th=1). To mount the controller to the mount, 2x 6mm-8mm M3 bolts and two M3 nuts are required. I used nylon-locking nuts to secure mine, but non-locking should work as well.
If you are using 24v LEDs strips and are feeling adventurous, you can power the LEDs directly off of the Prusa XL Sandwich board:
However, please use abundant caution so as not to hurt the printer in the process!