1 / 3

SP602E Bluetooth LED Controller 3030 Mount

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

This is a basic 3030 extrusion mount for the SP602E Bluetooth LED Controller (https://www.amazon.com/BTF-LIGHTING-WS2812B-Bluetooth-Controller-Outputs/dp/B0B1DJVG4Q?th=1). To mount the controller to the mount, 2x 6mm-8mm M3 bolts and two M3 nuts are required. I used nylon-locking nuts to secure mine, but non-locking should work as well.

If you are using 24v LEDs strips and are feeling adventurous, you can power the LEDs directly off of the Prusa XL Sandwich board:

However, please use abundant caution so as not to hurt the printer in the process!