Liczymy pasujące modele…
Useful to create lawn props with many stakes connected together to generate cool ground effects. There is 2 variations you can use. 5 pixels or 6 pixels. Material needed: 6 inch 11 Gauge Galvanized Pins Lawn Stakes (like in picture).…
The triangular-profiled ESP32 enclosure with WS2811 LED strip offers a stylish and functional solution for housing decor
Useful to create lawn props with many stakes connected together to generate cool ground effects. There is 2 variations you can use. 5 pixels or 6 pixels. Material needed: 6 inch 11 Gauge Galvanized Pins Lawn Stakes (like in picture).…
To make this strong print. slice with lots of walls and no infill. Tested with Rextin® WS2811 Pixels.
BetaFPV Air65 Tinywhoop LED bar Upgrade for BetaFPV Air racing whoop for 3 WS2811 LED strip compatible with original BetaFPV canopy. VTX antenna mount no glue hole for wiring fast repair and replacement Use BFlex or TPU filament. 2…
printable holder for one NeoPixel LED for Intelligent RGB LED NeoPixel Garland IP68 WS2811 5V
This remix adjusts the excellent pixel drilling jig originally created by RiggsCasa , and further remixed by @forkineye_399874 , to support 3-inch spacing instead of 2.8-inch. In Canada, Home Depot’s J-Channels are 150 inches long (vs 12…
J Channel Jig from Homedepot. https://www.homedepot.com/p/Ply-Gem-5-8-in-x-1-1-2-in-x-12-6-ft-White-J-Channel-VJC58104H/202666289. One Inch on-center spacing. The Model has a ½ inch and 1 inch from the edge for convenient half…
This mount replaces the existing LED from the factory. Fits the 2025 Home Depot Jumbo Bulb and standard RGB LED pixels I printed in PETG without supports
This was built to fit led nodes for wood three rail fences. Will work on any 2x4, 2x6, 2x8, etc.
I needed this part to cover the cable outside, but I couldn’t find anything like it, so CAD became my friend. link for the LED: https://s.click.aliexpress.com/e/_c3CcCuFl printed on 0.8 PETG if you intend to used outside
No special settings needed. However you should rotate the model so it's upright so you can print it without infill and support. I also advice to do at least one test print to check if your printer has the same tolerances regarding the…
holder and ground spike for WS2811 Addressable LED Pixel Lights
A bulb cover for a WS2811 light bulb in the shape of an easteregg.
A bulb cover for a WS2811 light bulb in the shape of a pumpkin.
A bulb cover for a WS2811 light bulb in the shape of a snowflake.
I bought a bunch of J30 globe lights from Ali Express and needed a way of attaching them to my Christmas props so made this bracket. The globe lights simply clip in and thanks to their concave shape and the little ridge on the bracket,…
I got tired of the sore hands, so made a quick block to allow me to push ws2811 pixels into megatree strips. I added support under where you push in the pixel which made it a good bit easier to push. Uses ¼-20 countersunk screws to attach…
I bought some WS2811 RGB outdoor lights that come with 3pin waterproof barrel plugs. Unfortunately on one of them the end cap was installed backwards so it couldn't be used to screw two plugs together and make a sealed connection. Fixing…
These bulb covers will fit WS2811 bulbs. They are printed in vase mode. I used a line witdh of 0.6mm. If you use a different with it might not fit as well, but it is also a way to adjust the fit to your needs. The bells are printed with…
A remix of the gutter clip that holds the ws2811 leds vertically on the front of the gutter.
This replaces the LED and switch mount for MAME KOF American Type Push buttons. Video example: https://youtu.be/QJ1OX\_ZHtn8 Buttons: https://www.aliexpress.com/item/33001974422.html LEDs: https://www.aliexpress.com/item/32960205936.html…
Gutter WS2811 RGB LED boscoyo strip holder, easy flip over mount to hold LED Boscoyo mounting strips. Printed in PLA with 6 Walls @ 25% infill.
This is a spacer I made to get the correct spacing for the WS2811 LED light Strings. Make your first 1/2 inch hole in the PVC then Insert the spacer and drill the next hole! Category: DIY
A lamp cover for WS2811 12mm Pixels that I use to decorate my house for the festive period. I print at 0.2mm layer height with a colour change at 10mm, I switch from black to natural PLA at that point which gives very nice light…
To make this strong print. slice with lots of walls and no infill. Tested with Rextin® WS2811 Pixels.
Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…
Slides and snaps into the pixel for WS2811 RGB LED Lights. Includes drain holes.
use the included brackets to attach the 12 pieces together using m3 bolts print with >1% infill and low quality some of the pieces alignment are off but can be forced together xmodel coming by May
A quick snowflake made w/ an infuriating 61 pixels. It has a separate bracket you attach w/ m3 screws and sized to attach to ½" EMT.
This one is a remix for 12mm WS2811/WS2812/WS2812B LED Stripes with a high LED-Count (144LED/m) like i used. Print Settings Printer: Geeetech A10T Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Generic PLA PLA Gold Notes:…
