3D-Printed Electronic Snowflakes using WS2811 LED Strip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Animated 3D-printed electronic snowflakes using WS2811 LED strips running on a 5-volt DC circuit powered by an Arduino
- Ocena
- 5 / 5
- Polubienia
- 108
- Pobrania
- 454
- Wydruki
- 2
- Wyświetlenia
- 2732
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
Instructions
are in the PDF document and in the YouTube video
Printing the branches
The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the branch. I would highly recommend using PETG rather than PLA as the snowflake will last longer if you use it outside, as I do.
Printing the center
I added the “Snowflake Center.stl” file to Printables. However, you can replace the center by a standard PVC pipe, with an outside diameter of 70 millimeters, if you have one. PVC might be sturdier than PETG.
Assembling the snowflake
You need 6 M5x18 bolts and nuts, or 6 #10 24-TPI ¾ bolts and nuts.
Code for the Arduino
The code is in the PDF document